Hyundai H-DVD5090 User manual

DVD-ПРОИГРЫВАТЕЛЬDVD PLAYERРуководство по эксплуатации Instruction manualH-DVD5090

23Table of contentsBefore you startDear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.99991010101010101111111212121213141414141414151516Table of contents Before you start Utilization of the product Important safeguardsSupported formatsConnectionVideo/audio system connectionOperationFront panelRear panelRemote controllerChanging the batteryButton functionsOpen/close PowerTitleSubtitle Angle Menu Play/pauseCursor buttonsNumber buttonsEnter StopStepFWDREVPREV/NEXTProgSlowSetupN/P RepeatA-BDVD/USBLanguagePBCDirect23334556667788888888888888889999999999ResumeZoomVolume+/Volume- MuteDisplayTimeCopy ReturnSystem setupGeneral setupAudio setupDolby setupVideo setupMpeg4 subtitle setupPreference setupOther functionsRippingMP3/JPEG/compressed video playbackHow to create a playlistCopying dataDeleting data from USBGeneral informationHandling compact discsCleaning discsTroubleshootingAccessoriesSpecification

23Table of contentsBefore you startIf you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.Utilization of the productImportant safeguards Alerts the user to the presence of dangerous voltage within the product’s enclosure. Alerts the user to the presence of important operating instructions. To reduce the risk of electric shock or fire, do not open the cover. Refer servicing to qualified service personnel. This mark indicates this unit belongs to class 1 laser product.• To prevent the risk of fire or electric shock, don’t allow water to come into contact with the device and don’t use the device in high humidity conditions.• The device is equipped with high voltage components and a laser system, hence you shall not open the device and repair it by yourself. The laser beam is dangerous to eyes when the housing is removed. Don’t look at it.• When the device is moved from cold premises to the warm room or vice versa, condensate may form on the laser head and the device may not operate properly. In this case please turn the device on for 1-2 hours without disc before playback to heat it to a proper operation temperature.• Don’t try to manually open or close the disc tray to load discs.• Disconnect the receiver only when there is no disc therein.• If you are not going to use the device for a long time disconnect it from the wall outlet.• Before turning the device on, please make sure that you have connected it properly, adjust the volume of speakers and amplifiers of your radio system to the minimum. Adjust the volume as necessary only after normal playback has started to avoid damage of your audio system.• Use supply sources of rated voltage, otherwise the unit may not function or may be damaged.• Place the unit on a horizontal surface. Keep the unit ventilated. Don’t block the heat hole. Overheat may cause malfunction.• Do not place any objects on the player’s cover, this may make it function improperly (incorrect playback).• Please place the device in a dry and well-aired area. Do not place it near heating units or expose it to direct sunlight, mechanical vibration, humidity or excessive dust.• If using power plug and appliance coupler as a cutting-connecting device, it should be operated easily.• Never use liquid detergents, abrasives or organic compounds (alcohol, gasoline, etc) to clean the unit body.W a rning
RISK OF ELECTRIC SHOCK
DO NOT OPEN

4Before you start• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.• Keep the unit away from water or high humidity. It is strongly forbidden to place any utensil with liquid such as vase on the top of the unit.• All repairs and technical service should be made by qualified specialist from service centers.All images provided herein are schematic drawings of real objects and may differ from their real images.Supported formatsDisc typesSymbolContentsDVDCompressed digital audio - videoMPEG4 (DivX)Compressed digital audio - videoVideo-CD (VCD)Compressed digital audio - videoSuper-VCD (SVCD)Compressed digital audio - videoCDDADigital audioMP3Compressed digital audioKodak Picture CDCompressed digital static imageJPEGCompressed digital static image

5ConnectionVideo/audio system connection Before you start connection of external devices, ensure that power of the unit is switched off.Following outputs are available in this unit.Composite videoUse the cable with yellow plug of an AV cable to connect the composite video output of this unit to the video input of a TV/monitor.SCARTUse a 21-pin SCART cable to connect the SCART output of this unit to the TV/monitor SCART input.5.1CH audioUse 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.1 channel inputs of external audio amplifiers or other players.Stereo audioUse a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of this unit to the stereo inputs of a TV or a power amplifier.Coaxial digital audioUse a special coaxial cable to connect the coaxial output of this unit to the coaxial input of an external device (e.g. amplifier with).OpticalUse the special optical cable to connect the optical audio output of this unit to the optical input of power amplifier.Component videoUse a 3-core AV cable to connect the component outputs of this unit to the corresponding inputs of a TV/monitor.S-videoUse an S-Video cable to connect the S-Video output of this unit to the S-Video input of a TV/monitor. • The connection you should make depends on the TV/monitor input terminals. Don’t make all the connections at the same time; otherwise the produced picture will be affected.• The physical connection should accord to the audio output setup of this unit.

6OperationControl elementsFront panel123456781. STANDBY button2. Disc tray3. Display4. OPEN/CLOSE button5. PLAY/PAUSE button6. SOURCE button7. USB port8. MIC out jackRear panel 123456789 1. Power cord2. SCART connector3. Stereo R/L audio output4. Component video output5. 5.1CH audio output6. Digital coaxial output7. Composite video output8. S-Video output9. Optical output

7OperationRemote controller (RC) 12345678910111213141516171819202122232425262728293031321. POWER button2. Digit buttons3. ZOOM button4. DISPLAY button5. TITLE button6. STEP button7. SUBTITLE button8. LANGUAGE button9. Cursor (///) buttons/ENTER button10. PBC button11. SETUP button12. REV/FWD buttons13. PLAY/PAUSE button14. STOP button15. COPY button16. MUTE button17. OPEN/CLOSE button18. SOURCE button19. TIME button20. A-B button21. REPEAT button22. N/P button23. SLOW button24. MENU button25. RESUME button 29. VOLUME+ button26. PROG button 30. DIRECT button27. ANGLE buttons 31. VOLUME- button28. PREV/NEXT button 32. RETURN button Changing the battery1. Remove the battery compartment cover on the back of the RC.2. Insert the batteries into the battery compartment making sure that the correct polarity is observed.3. Install the cover back.• Use two AAA/1.5V batteries for the RC. The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.• Take the battery out of the RC if it is not used for a long time.• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.123

89OperationOperationButton functionsOPEN/CLOSEPress OPEN/CLOSE button when power is on, the disc tray is pushed out. Put the disc on the tray with the title faced up. Press OPEN/CLOSE button again to close the disc tray and the unit starts playing automatically.POWERWhen playing, press STANDBY button on the panel or POWER button on the RC to turn off the unit, and standby mode will be activated; press the button again, to turn on the unit and it will start playing.TITLEWhen playing a DVD disc, press TITLE button to return to the main title menu of the disc.SUBTITLEWhen playing a disc with multi-language subtitle, press SUBTITLE button continually, the subtitle languages are changed in a circle, and you can select the needed one.ANGLEWhen playing the disc with multi-angle, press ANGLE button to select the view angle.MENU• When playing DVD disc, press MENU button once to return to the main menu of the disc.• When playing SVCD, VCD2.0, after the disc is loaded, the unit will display the chapter menu (if PBC is on). Also, you can display this menu by pressing MENU button.PLAY/PAUSEWhen playing the disc, press PLAY/PAUSE button once to pause; press PLAY/PAUSE button again to return to normal playback.Cursor buttonsPress cursor buttons to navigate in various menus.Number buttonsPress number buttons to input digits and numbers (e.g. track/chapter number, playback time etc.).ENTERPress ENTER button for confirmation of chosen options.STOPWhen playing DVD, SVCD, VCD, CD disc, press STOP button once, the unit will memorize the previous ending point; when afterwards you play the same disc, playback will start from the memorized point. Press STOP button two times, playback will stop without memorizing the stop point. This function is only active when ON is set for Last Memory item in General setup page.STEPWhen playing DVD, SVCD, VCD disc, press STEP repeatedly to play video frame by frame. Press PLAY/PAUSE button to resume normal playback.FWDPress this button for quick forward search. Search speed will increase with each pressing: 2X => 4X => 8X => 16X => 32X => normal.REVPress this button for quick rewind search. Search speed will increase with each pressing: 2X => 4X => 8X => 16X => 32X => normal.PREV/NEXT• When playing DVD disc, press PREV button to go to the previous chapter.• When playing SVCD, VCD, CD disc, press PREV button to go to the previous track.• When playing DVD disc, press NEXT button to go to the next chapter.• When playing SVCD, VCD, CD disc, press NEXT button to go to the next track.

89OperationOperationPROG• If the disc contains 2 or more tracks, chapters or titles, set up the playing order to your preference. Press PROG button to enter program menu.• Press number buttons to input the number of the track, title or chapter. If programmed tracks are over ten, select NEXT item and press ENTER button to go on programming. Maximum 20 programmable items are possible. Use cursor buttons to move the cursor to START item. Press ENTER button to start program playback. Press PROG button to cancel programming. For MP3 disc, this function is not available.SLOWPress SLOW button repeatedly to change slow playback speed as follows: X2 => X4 => X8 => X16 => normal.SETUPPress SETUP button to enter or exit the system setup menu.N/PPress N/P button to select between PAL/Multi/NTSC video mode. This function is only available when no disc is inside the unit.REPEATPress REPEAT button to repeat a title, chapter, track or the whole disc.• When playing DVD disc, press REPEAT button continually to repeat chapter => title => all => repeat off.• When playing SVCD, VCD, CD disc, press REPEAT button continually to repeat track => all => repeat off.• When playing MP3 disc, press REPEAT button continually to play single => repeat track => repeat all => repeat off.A - B• Press A-B button at the start point (A) and the ending point (B) to select the repeat fragment.• Press A-B button the third time to cancel fragment repeat and return to normal play.SOURCEPress this button to switch between disc and USB playback (if they are inserted into the unit). Operations with files contained in a USB storage are the same as for discs.LANGUAGEWhen playing DVD with more than one audio stream, press this button to select the needed language.PBCPress this button to turn on or off Playback Control (PBC) function.DIRECTIf a DVD disc contains a warning or notice message or an advertisement clip, press this button to skip them and go directly to the disc contents.RESUMEPress this button to go back to current playback after activating the disc title menu with TITLE button.ZOOMWhen playing DVD, SVCD, VCD disc, press ZOOM button to zoom in the picture as follows: 2x => 3x => 4x => normal. In zoom in mode, press cursor buttons to move the picture for viewing.VOLUME+/VOLUME-Press VOLUME+ button to adjust volume up. Press VOLUME- button to adjust volume down.MUTEPress MUTE button, the sound will be turned off. Press MUTE button again, the sound will resume.

10OperationDISPLAYPress DISPLAY button to display various info on the current playback: title/chapter time elapsed/remaining, etc.TIMEPress TIME button to input chapter/title number or disc time. Playback will start in accordance with the input data.COPYPress to enter Ripping menu. A CD and a USB should be inside the unit.RETURNWhen playing DVD, Super-VCD or VCD2.0 discs, press RETURN button to go to the disc menu. Press the button again to return to current playback. This function is not available when PBC is off.System setup1. Press SETUP button to enter the setup menu. In Setup menu, press SETUP button again to quit the setup page.2. Use / buttons to choose a setup page: General setup, Audio setup, Dolby setup, Video setup, Mpeg4 subtitle setup, Preference page.3. Press button to enter the setup page selected.4. Use / buttons to select the option you want to adjust.5. Press button to enter the adjustment list. Use / buttons to select the adjustment and press ENTER button to confirm and button to return to options list.6. To return to setup page list press button when in the option list. Items in gray can’t be set up. The setup is memorized and kept after power is off.General setupGeneralAudioDolbyVideoMP4subPrefer.General Setup PageTV fromatAngle markOSD langCaptionsScreen saverLast memory• TV formatNormal/PS: When the unit is connected to the normal TV set, the wide-screen image is shown on the full screen, but some part is cut off.Normal/LB: When the unit is connected to the normal TV set, the wide-screen image is shown and black stripes appear on the top and bottom of screen.Wide: Use this item when the unit is connected to the normal TV set, if you want to squeeze the picture.• Angle MarkWhen playing DVD disc with multi-angle view, if selected ON, the angle mark is shown.• OSD LangSelect on-screen display language.• CaptionsThis function doesn’t work when the disc is without caption. If the caption is OFF, press SUBTITLE button on the remote control to make caption on. The default setup is ON.• Screen SaverIf the SCREEN SAVER is set ON and the unit is turned on without a disc playing for several minutes, a moving picture appears on the screen, and the unit will go to standby mode after several minutes. You can press POWER button to wake it up.• Last MemoryWhen this function is on, the unit can memorize the time elapsed from the last time you played the disc. Then at the next playing, it will resume playing from the memorized time. This function is active only for power switch-off. If, after stopping playback, you

11OperationDolby setupGeneralAudioDolbyVideoMP4subPrefer.Dolby digital setupDual monoDynamicDual MonoStereo: stereo output signal,L-Mono: left output signal,R-Mono: right output signal,Mix-Mono: left and right output average signal.• DynamicIf watching large dynamic scope movie program at night, selecting this mode you can reduce the volume to a very low level, at the same time, to keep the fine details sound. In this case, this doesn’t disturb the family and keep the quality sounds.Video setupGeneralAudioDolbyVideoMP4subPrefer.Video Setup PageComponentTV modeSharpnessBrightnessContrast• COMPONENTOFF: select if the unit is connected to composite video display equipment.YUV: set video output in analog component video format when connecting to Y/U/V terminals.RGB: set video output in Red/Green/Blue format when connecting to SCART terminals.• TV MODEchanged the operation mode to USB and back to Disc, the stop point of playback will not be memorized.Audio setupGeneralAudioDolbyVideoMP4subPrefer.Audio Setup PageSpeaker setupSPDIF setupMICEcho Level• Speaker SetupDOWNMIXLT/RT: The audio out is Left and Right channels format even if the original sound is 5.1CH format.STEREO: The audio out format is stereo even if the original sound is 5.1CH.OFF: Select when you use this player’s built-in Dolby Digital decoder to play 5.1CH sound.Front, Center, Rear speakerIf your speaker system includes the above speakers, you can set these items according the real speaker status. In karaoke On mode, or downmix is not set to Off, these setup don’t work.SubwooferTurn the subwoofer ON or OFF.Prologic IITurn the Prologic II ON or OFF.• SPDIF SetupSPDIF OFF: no digital signal out (coaxial output off), only analog audio output.SPDIF/RAW: no decoding on the amplifier digital signal input.SPDIF/PCM: the amplifier must be supported by PCM decoding or Dolby digital decoding function.• MICTurn the microphone ON or OFF.• Echo levelAdjust the level of echo.

1213OperationOperationSelect between progressive scan and normal interlace scan.• SHARPNESS, BRIGHTNESS, CONTRASTYou can set sharpness, brightness and contrast according to your preference.MPEG4 subtitle setup pageGeneralAudioDolbyVideoMP4subPrefer.Mpeg4 Subtitle setup pageBackground colorOutline colorText color• Background color, Outline color, Text colorChange the color of DivX subtitle background, outline and text among the 15 available colors.Preference setup (available while playback full stop)GeneralAudioDolbyVideoMP4subPrefer.General Setup PageTV systemAudioSubtitleDisc menuParentalPasswordDefault• TV systemThis unit is suitable for all kinds of TV systems. You can select one of the PAL, NTSC or AUTO.PAL: this system is used in CHINA, EUROPE, HONGKONG etc.Multi: the TV system is auto switched according to the disc system.NTSC: this system is used in USA, TAIWAN, JAPAN etc.• Audio, Subtitle, Disc MenuThese are the initial settings by your preference. If a setting is supported by disc content, it will work. Otherwise the disc default value works.• ParentalThe control level is for parental to control playing content and protect your children from violence and erotic. The disc, the level of which is higher than the setting level cannot be played.• PasswordChange the password. The initial factory password is 136900. You can set your own password. If you forget your own password, you can use 136900 as general password.• DefaultRestore the initial factory settings.Other functionsRippingThis unit has Ripping function making it handy and quick to copy audio files (e.g. music) from CDs. RIPPING is converting from CDDA format to the compressed MP3 format onto a USB drive. In the course of copying, ID3 tags are generated automatically in Russian and English, depending on the source. If the disc does not contain such information in CD-text format, ID3 tags will be written as “Unknown artist” and “Unknown album”.RIPPING function has a simple and intuitive menu. To display the Ripping menu, press COPY button on the RC while a CD playback. A USB-drive should be connected to the unit.

1213OperationOperationCreate ID3 Yes
For navigation in the menu use cursor buttons and press ENTER button to confirm your option. In “Options” column you may set speed and bit rate for ripping. In “Track” column you may select tracks for ripping (press ENTER button to select a highlighted track). Besides, you can select all tracks (“Select all”) or cancel your choice (“Select none”). To start converting process, select “Start” and press ENTER button.MP3/JPEG/compressed video playbackMP3 - generally adopted standard of audio compression, compressing audio data to 1/12 of their size. One CD disc mat store more than 600 minutes of music (170 songs). And the quality of MP3 disc approximates to an audio CD disc quality.JPEG (Joint Photographic Expert Group) - image compression algorithm, used all over the world and providing high level of compression of the source data. Any graphics editor may edit images of this format and their size in 15-20 times less then the original images. Some DivX discs cannot be played due to their parameters and recording conditions. Video files more than 2 Gb having AVI extension can be played partially.When a disc, a USB containing files of these formats is inserted, following menu interface will be displayed:1231. Playback info window - shows current playback time, track number, volume level, playback status (stop/play/pause) etc.2. Address window - shows directory address at which the currently played file is found.3. Directory window - shows the currently selected directory.Use cursor buttons to select the directory you want and press ENTER button to enter it. Select a file and press ENTER button to start its playback. While playing JPEG files press STOP button to go back to the menu.Press cursor buttons to rotate the picture in different directions.Regardless of the picture size and format, a picture may possibly not be shown on the full screen area, leaving black stripes.

14General informationHow to create a playlistWhen in the above menu, press PROG button to enter the File list mode. In this mode, all files (including all files in all directories) will all be displayed in this window. Select files you want to put on the playlist by pressing ANGLE button. After selecting all needed files for the playlist, press PROG button to enter the playlist. Press ENTER button to start playing files in the playlist.Copying data• Play data disc or USB containing MP3/JPG/DivX files.• Press COPY button on RC, the COPY menu will appear with option of ALL SELECT/ALL UNSEL/COPY/EXIT.• Move the cursor to the target file or folder, press ENTER button to tick it, or select ALL SELECT item to select all the data.• Move the cursor to COPY item, then press ENTER button to display the destination (USB1).• Press ENTER button to display the option BACK/NEXT.• Choose NEXT item to start copying data the selected device.Deleting data from USB• Play USB device containing the desired data.• Press COPY button to get the menu of ALL SELECT/ALL UNSEL/COPY/DEL/EXIT.• Move the cursor to the target file or folder, press ENTER button to tick it, then move to DEL item and press ENTER button to delete the data from the device.USB noteFor correct and satisfactory operation, licensed USB flash of famous brands should be used with this unit. Avoid using USB of unknown brands. Capacity: up to 32 Gb.Handling compact discs• Do not insert anything other than a CD into the disc tray.• Do not use cracked, chipped, warped, or otherwise damaged discs as they may cause damage to the player.• Handle the disc only by the edges (as shown in the picture). To keep discs clean do not touch its surface.• Store discs in their cases when not in use.• Do not expose discs to direct sunlight, high humidity, high temperature or dust.• Prolonged exposure to extreme temperature can wrap a disc.• Do not attach labels, write on or apply chemicals to the surface of the discs.• Do not touch the recorded surface of the discs.• Use 12-cm CDs. Use only conventional, fully circular discs. Do not use irregularly shaped discs.Cleaning discsFingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and macroscopic dirt, so gently wiping them with a soft cloth should remove must panicles. Wipe in a straight motion from the center to the edge.Never use thinner benzine, record cleaner or anti static spray on a compact disc. Such chemicals can damage its plastic surface.

15General informationTroubleshootingBelow is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer.SymptomCauseSolutionNo soundPoor audio cable connectionMake proper connectionDisc dirty or damagedClean the discMUTE function is onDisable MUTE functionNo imagePoor video cable connectionMake proper connectionIncorrect setting of your TV setCorrect the settings of your TV setDisc cannot be readDisc not insertedInsert the discDisc inserted incorrectlyInstall the disc with the label side facing upCondensate on the unit laser headSwitch the unit on without disc for an hourRemote control does not operateRemote control is incorrectly directed at the unitUse the remote controller according to the manualDistance and angle to the unit are too largeDecrease the distance and angleRun out batteriesReplace both batteriesSome functions do not workDisc is recorded incorrectlyWait 5-10 seconds and the unit will automatically return to normal styleIncorrect key sequenceRepeat the operation one more timeStatic voltage on the unit housingSwitch the unit off for 1-2 minutes and then switch it on againUnstable imageIncorrect TV settingsCorrect the TV settingsAccessories1. DVD player 1 pc2. Remote controller 1 pc 3. Audio-video cable 1 pc4. Battery AAA 1.5V 2 pcs5. Consumer information 1 pc6. Warranty card 1 pc7. Instruction manual 1 pc

16General informationSpecificationsAppearanceDimensions 360 mm X 208 mm X 28 mmNet/Gross weight 1.5 kg/1.8 kgCompatibilitySupports DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USBFormats of playback DVD-video/Super VCD/VCD/HDCD/CDDA/MP3/Kodak Picture/JPEG/MPEG4 (DivX/XviD)Support of multiple audio tracksfor MPEG4 (DivX/XviD) +Support of subtitle for MPEG4 +AudioBuilt-in Dolby Digital/Dolby Prologic II decoder +DTS digital out (coaxial) +VideoSupport NTSC/PAL +ConnectorsComposite +SCART +Coaxial +S-Video +Component (YUV) +Optical +5.1CH +Stereo +FunctionsScreen saver +Zoom +Children lock +Karaoke function +Multi-shooting angle +Audio CD ripping in MP3 formatto USB flash drive +Copy function from discsto USB flash drive +Russian and English OSD +AdditionalPower supply ~110-240 V, 50/60 HzPower consumption in “STANDBY” less than 1 WSpecifications are subject to change without notice. Dimensions are approximate.

17СодержаниеУважаемый покупатель!Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте руководство для использования в будущем.2525252525252525252525262627272728282829303030313131313233Содержание Перед началом эксплуатации Утилизация изделия Меры предосторожностиПоддерживаемые форматыПодключениеПодключениеУправление устройствомЭлементы управленияПередняя панельЗадняя панельПульт дистанционного управленияУстановка батареекФункции кнопокOpen/close PowerTitleSubtitle Angle Menu Play/pauseКнопки курсораКнопки с цифрамиEnter StopStepFWDREVPREV/NEXTProgSlowSetupN/P RepeatA-BDVD/USBLanguage17181818192020212121212222232323232323232323232323232323242424242424242425PBCDirectResumeZoomVolume+/Volume- MuteDisplayTime ReturnCopy Настройка системыСтраница общих настроекСтраница настройки аудиоНастройка Dolby DigitalСтраница настройки видеоНастройка субтитров Mpeg4Настройка предпочтенийПрочие операцииФункция rippingВоспроизведение файлов MP3/JPEG/сжатых форматов видеоСоздание списка воспроизведенияКопирование файловУдаление данных с USB Общая информацияОбращение с компакт-дискамиЧистка дисковКомплект поставкиРуководство по устранению неисправностейТехнические характеристики

18Перед началом эксплуатацииЕсли вы желаете утилизировать данное изделие, не выбрасывайте его вместе с обычным бытовым мусором. Существует отдельная система сбора использованных электронных изделий в соответствии с законодательством, которая предполагает соответствующее обращение, возврат и переработку.Обращайтесь в органы местного управления за инструкциями по правильной утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с соблюдением обязательных процедур по обработке, утилизации и вторичной переработке и, таким образом, предотвратите потенциальное негативное воздействие на окружающую среду и здоровье людей.Утилизация изделияМеры предосторожности Предупреждение о наличии высокого напряжения внутри устройства. Напоминание о проведении всех действий в соответствии с инструкциями. Во избежание риска поражения электрическим током или пожара не открывайте корпус изделия. Обращайтесь к квалифицированному пер-соналу. Изделие принадлежит к лазерной продукции 1 класса.• Для предотвращения риска возгорания или удара током избегайте попадания в устройство воды и эксплуатации устройства в условиях высокой влажности.• Устройство содержит компоненты под высоким напряжением и лазерную систему, поэтому не пытайтесь самостоятельно от-крывать и ремонтировать устройство. Лазер-ный луч опасен при снятой крышке корпуса.• При перемещении устройства из холод-ного места в теплое и наоборот на лазер-ной головке может образоваться конденсат и устройство не будет работать должным образом. В этом случае перед началом вос-произведения включите устройство на 1-2 часа без диска для прогрева до комнатной температуры.• Не пытайтесь открывать или закрывать лоток для загрузки дисков вручную.• Отключайте питание устройства только при отсутствии диска.• Выключайте устройство из розетки, если Вы не собираетесь использовать его в течение долгого времени.• Перед включением устройства убе-дитесь, что оно подключено правильно, установите на минимум уровень громкости усилителя и динамиков Вашей аудиосисте-мы. Регулируйте уровень громкости только после начала воспроизведения, чтобы из-бежать повреждения аудиосистемы.• Подключайте устройство только к сети с параметрами, соответствующими напря-жению питания аппарата.• Устанавливайте устройство горизон-тально; обеспечивайте хорошую вентиля-цию, не закрывайте отверстия, предназна-ченные для отвода тепла.• Не ставьте посторонние предметы на корпус устройства; это может стать причи-W a rning
RISK OF ELECTRIC SHOCK
DO NOT OPEN

19Перед началом эксплуатацииной некорректной работы устройства.• Устройство должно находиться в сухом и проветриваемом месте. Исключайте на-хождение устройства вблизи нагреватель-ных приборов, не подвергайте воздействию солнечного света, механической вибрации, влажности и пыли.• Не используйте для чистки корпуса устройства жидкие чистящие средства, абразивные материалы или органические соединения (алкоголь, бензин и др.).• Не допускайте нахождения источников воды или сосудов с водой рядом с устрой-ством. Не ставьте вазы, кружки и т.п. на корпус устройства.• Для ремонта и технического обслужи-вания устройства обращайтесь в сервисные центры.Все иллюстрации, приведенные в на-стоящем руководстве, являются схе-матическими изображениями, которые могут отличаться от реальных объектов.Поддерживаемые форматыТип дисковСимволСодержимоеDVDСжатое цифровое аудио - видеоMPEG4 (DivX)Сжатое цифровое аудио - видеоVideo-CD (VCD)Сжатое цифровое аудио - видеоSuper-VCD (SVCD)Сжатое цифровое аудио - видеоCDDAЦифровое аудиоMP3Сжатое цифровое аудиоKodak Picture CDСжатое цифровое статическое изображениеJPEGСжатое цифровое статическое изображение

2021ПодключениеУправление устройствомПодключение Перед началом подключения устрой-ства к другому оборудованию убедитесь, что электропитание отключено.Данное устройство оснащено следующи-ми разъемами:Композитный видеоразъемИспользуйте аудио-видеокабель с жел-тым разъемом для подключения видео-выхода данного устройства к видеовходу телевизора/монитора.SCARTИспользуйте 21-контактный SCART-кабель для подключения разъема SCART данного устройства к входу SCART теле-визора/монитора.5.1-канальный аудиовыходИспользуйте 3 пары аудиокабелей для подключения 5.1-канального выхода данного устройства к 5.1-канальному входу внешнего усилителя или другого плеера.Стерео аудиовыходИспользуйте парный аудиокабель (белый для левого канала, красный для правого канала) для подключения стереоаудиовы-ходов данного устройства к стереовходам телевизора или усилителя мощности.Коаксиальный цифровой аудиовыходДля соединения этого выхода устройства с разъемом внешнего устройства (напр., усилитель мощности), используется специ-альный коаксиальный кабель.Оптический цифровой выходДля соединения оптического выхода устройства с оптическим разъемом на усилителе мощности используется специ-альный оптический кабель.Компонентный видеовыходДля подключения компонентного выхода устройства к входным разъемам на теле-визоре или мониторе используются все три провода аудио-видеокабеля.S-VideoВыходной разъем S-Video устройства соединяется с таким же входным разъемом на телевизоре или мониторе посредством кабеля S-Video. • Подключение следует выполнять в соответствиями с разъемами, имеющи-мися на подключаемом оборудовании. Не подключайте все виды разъемов одновре-менно, это может отрицательно повлиять на качество изображения или звука.• Параметры настройки должны быть выполнены в соответствии с разъемом, через который устройство подключается к внешним устройствам.