Hyundai 90509536 User manual

L22R1W

HDMI

SCAN
MENU
VOL-
EXIT
P.MODE ARC
CCD MTS/SAP
PIP SWAP MOVE
1 2 3
4 5 6
7 8 9
CH+
CH-
VOL+
OK
SLEEP
H.LOCK
0
HDMI
S.MODE
FREEZE
FAVORITE
MUTE
RECALL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1.Power
2.SCAN
3.Not available
4. Input selection
5.MENU
6.Volume/Channel Selection
7.Exit On Screen Display
8.Adjust Picture Mode
9.Select the aspect ratio
10.Not available
11. Not available
12.Not available
13.Not available
14.HDMI mode
15.Program Number
16.Program Information
17.Mute
18.Confirm button
19.Return to previous channel in TV mode
20.Adjust sound mode
21.Sleep button
22.Not available
23.Hotel Lock
24.Not available
25.Not available
INPUT DISPLAY

SCAN
MENU
VOL-
EXIT
P.MODE ARC
CCD MTS/SAP
PIP SWAP MOVE
123
456
789
CH+
CH-
VOL+
OK
SLEEP
H.LOCK
0
HDMI
S.MODE
FREEZE
FAVORITE
MUTE
RECALL
INPUT DISPLAY

Press H.LOCK to enter it and input thepassword correctly, the H.LOCK menu
will appear onthe screen(The initialpassword is 0000).
Change password: The password can be changed. Press CH+/-to select
Change password andVOL+/OK to enter. The screen will display New PW:----,
then enter thenew password and the screen display Confirm PW:----, if the same
password is input correctly twice, the old password will be changed.
Tuner Lock: The tuner can be locked. Press CH+/-to select.
Preset Source: Preset the source.
Preset CH.: Preset the channel.
Source Lock: The source can be locked. Press CH+/-to select.
Child Lock: Press CH+/- to select it . Press VOL+/- to set on or off mode. If lock
on mode isset, child lock is inactivated automatically. In suchcase, buttons
on the television is useless and only buttons on remote control can be used,
if buttons on the televisionare pressed, thescreen will display Child Lock.
The child lock mode can be resumed by entering lock set menu, set child lock on.
Unlocked: Press to turn to the unlocked mode.

Not available inPC
Not available
PICTURE MODE STANDARD
CONTRAST
BRIGHTNESS
HUE
CHROMA
SHARPNESS
PICTURE MODE STANDARD
CONTRAST
BRIGHTNESS
HUE
CHROMA
SHARPNESS
Only available inNTSC system
In this manual,the OSD (On Screen Display) maybe different from your TV s
because it isjust an example to illustrate theTV operation.
Press INPUT to select the input source, and the menu for each source is different.
1. Press MENU button todisplay the mainmenu, and VOL+/-to select the main
menu.
2. Press CH+/- to scroll through the parameters.
3. Press VOL+/- buttons to make changes to the parameters.
4. Press EXIT button to exit the menu.
Picture Menu Options
Picture quality can be adjusted for any input separately.
The picture qualityon the screen can be adjusted as follows:
1. Press MENUbutton and VOL+/- until the following menu appears onthe
screen.
Note: Symbols ontop of the menu in this manual may bedifferent from the actual
set.
PICTURE
PICTURE

Picture Menu Options continued
2. Press CH+/-button to enter the picture menuand to go up and downto
select the desired option.
3.Press VOL+/- buttonto increase and decrease the level to adjust the
selected option to your preference.
4. Repeat step 2 and step 3 until desired picture quality has been achieved.
Function:
Picture Mode: Press VOL+/- to select: Standard Soft Bright User.
Contrast : Adjust the contrast of the picture . The contrast becomes higher as
the number increase.
Brightness :Adjust the brightness of the picture. By increasing the level, it will
add more light to dark parts of the picture and by decreasing the level ,it will add
more dark to light parts of the picture.
TUE: Adjust the picture tone.
Chroma : Press VOL+/- to adjust the color.
Sharpness : Adjustthe amount of the detail enhancement , the image sharpness
rises as the number increases (By increasing the level, it will show cleaner and
clearer images andby decreasing the level, it will make picture smoother).
Color Temp. : Press to select the color temperature from Standard/Warm/Cool.
Reset: Reset all settings to factory mode.

Sound Menu Options
Sound can beadjusted for any input as follows:
1. Press MENUand VOL+/- button until the following menu appears on
the screen.
You can adjust sound options to the levels you prefer.
2. Press CH+/-button to enter the audio menu and to go up and down to
select the desired option .
3.Press VOL+/- buttonto increase and decrease the level to adjust the
selected option toyour preference .
4. Repeat step 2 and step 3 until desired sound quality has been achieved.
Function :
Sound Mode: Press VOL+/- to select: Standard/Theater/Music/User.
Balance : Adjustthe balance of the audio output from left to right . When
indication value of balance increases toward +50 , sound of the left speaker
becomes weaker . When indication value of balance decreases toward -50 ,
sound of the right speaker become weaker. Can only be adjust under User mode.
Bass : Adjust the bass of the sound . Can only be adjust under User mode.
Treble: Adjust the treble of the sound . Can only be adjust under User mode.
Surround: To turn thesimulated surround sound on or off.
Reset: Reset all settings to factory mode.
SOUND MODE STANDARD
BALANCE
BASS
TREBLE
SURROUND OFF
RESET
SOUND

LANGUAGE ENGLISH
ASPECT RATIO FULL
MENU TIME 15S
HALFTONE 50
BLUE SCREEN OFF
PIC.OPTIMIZE
2. Press CH+/-button to enter the function menuand to go up and downto
select the desired option .
3. Press VOL+/- button to adjust theselected option to your preference .
Functions:
Language: This item displays the language of the OSD.
Aspect Ratio: To select the display mode :4:3/Full/Zoom.
Menu Time: To select 5S/10S/15S.
Halftone: To select the menu transparency.
Blue Screen :Press VOL+/- to select On or Off. To set On, screen will be in
blue screen after 3 seconds if there is no signal.
PIC.OPTIMIZE: To select the picture optimize.
You can select LTI CTI BLE DNR.
LTI: Luminance Transient Improvement. Press VOL+/- to select Onor Off.
CTI: Chrominance Transient Improvement. Press VOL+/- to select On or Off.
BLE: Black LevelExtension. Press VOL+/-to select On or Off.
DNR: Digital NoiseReduction. Reduces theappearance of digitizing errors
caused by compression.Press VOL+/- toselect On or Off.
Menu Language Selection:
The menus canbe shown on the screen in the selected language. First select
your language.
1. Press MENUbutton and VOL+/- until the following menu appears on the screen.
FUNCTION

1. Press MENUand VOL+/- button until the followingmenu appears on the
screen.
2. Press CH+/- button to enter the turning menu and to goup and down to select
the desired option .
3.Press VOL+/- button to adjust the selected option to your preference .
Functions:
Auto Search: Autosearch and save the channel .Pressthe VOL+ button to start
automatic search function operation. All channels now available will be
automatically preset inorder .After the search has finished, the first program
number will displayon the screen. This search automatically adds only the active
channels in yourarea to the TV's memory. It deletes any channels on which there
is no broadcast or a poor signal.
Channel: Show the channel number.
Color System: Press VOL+/- to select Auto, PAL, NTSC, SECAM.
Sound System: Press VOL+/-to select D/K, M, B/G, I.
Manual Search: Manual search and save the channel.
Fine Tune : If the image and/ or sound received isnot very good , youcan press
CH+/- to select Fine Tune in the menu . Then , press VOL+/- button to adjust and
improve the imagequality. Do not usethis feature unlessreception is poor.
Skip : If you want skipa channel ,press VOL+/- to select On , and this channel
will be skipped next time when you press CH+/- . Youcan press the digit buttons
to select thechannel . If you want torestore the channel , select Off.
Tuner Menu Options
AUTO SEARCH
CHANNEL 2
COLOR SYSTEM AUTO
SOUND SYSTEM D/K
MANUAL SEARCH
FINE TUNE 42.12MHZ
TUNING
Note: This menu appears only in TV mode