5Instruction manualthe center spindle, gently lower the CD-door downwards until it locks shut. The disc is now ready to be played.• When opening the CD-door, always ensure the disc is not in motion (not spinning). Always press STOP button to stop the disc spinning first.• To remove the disc, follow the same procedure as described above, except to remove the disc instead of inserting it into the compartment. Always hold a disc by its edges. Avoid getting any fingerprints, smudges or dirt onto the surface of a disc. In case this happens, use a special CD-cleaning cloth or cleaning kit to remove the dirt or smudges.Important: Please make sure to always fold down the handle before opening the CD door.Compact disc operation• Set function switch to CD/MP3 position.• Put a disc into the CD compartment and close the CD door.• The display will show the total number of tracks after a few seconds.Play/pause mode• Press USB button on the unit or on the RC to start playback, the display will show the current track number and PLAY symbol.• Press USB button on the unit or on the RC to pause at any track when playing, PLAY symbol on the display flashes. Press this button again to resume playback.• To stop playback, press STOP button. The display will show the total number of tracks on the disc.Skip and search mode• Press button on the unit or button on the RC once to skip to the next track. Press and hold this button to search for a particular point at high speed forward. Release the button to resume normal playback.• Press button on the unit or button on the RC to go to the beginning of the current track; press this button twice to skip back to previous track. Press and hold this button to search for a particular point at high speed backward. Release the button to resume normal playback.• If the disc contains more than 10 tracks, you can skip to 10 tracks forward or back by pressing +10/FOL+ or -10/FOL- buttons on the RC correspondingly.• If you use an MP3 disc containing folders, you can select a folder. In stop mode, press and hold repeatedly +10/FOL+ or -10/FOL- button on the RC. The number of the current folder will be displayed. After you selected a folder you can select tracks in the current folder as described above. While playback, the track number and folder number will be shown every few seconds alternatively.Repeat/Random mode• Press once REP/RAN button on the unit or REPEAT/RANDOM button on the RC for single track repeat playing. REP will be displayed.• Press this button again for all track repeat playing. REP ALL will be displayed.• If you use an MP3 disc containing folders, press this button again to repeat all tracks in the current folder. REP ALBUM will be displayed.• Press this button again for all track random playing. RANDOM will be displayed.• To cancel repeat or random playback, press again REP/RAN button on the unit or REPEAT/RANDOM button on the RC.Program modeUp to 99 tracks can be programmed for disc play in any order or the same track can be repeated up to 99 times.• Before use, be sure to stop the disc by pressing STOP button.• Press PROGRAM button on the RC or PROG button on the unit. The display will show “P01” and “PROGRAM”. This indicates that the set is now in memory programming mode, at the first memory position.• If you use an MP3 disc, press and hold
