I-Tech ACTIVE 2 User manual

(US)
USER MANUAL VERSION 1.0
FITNESS TRACKER
“This iTech Wearables smartwatch is NOT a medical device. This device and related software and applcations are NOT intended for use
in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment or prevention of disease. Users should NOT interpret
or take clinical action based on the device output without consultation of a qualified healthcare professional. “

Getting Started
What’s in the box?
Charging Your iTech Active 2
Setting up iTech Active 2
Connecting, Syncing & Pairing
Powering On/Off
Basics
Navigating iTech Active 2
Motion Gesture & Brightness
Changing Watch Faces
Navigation Tips
Apps and Features
Timekeeping
Notifications & Messaging
Activity Tracking & Sleep
Sedentary Reminder
Sleep Monitor
Heart Rate Monitor
Fitness & Exercising
Connected GPS
Camera & Music Remote
Additional Features
Updating, Restarting, & Erasing
Wear & Care
Regulations and Safety Notices
TABLE OF CONTENTS
3
3
3
4
4
4
4
5
5
5
5
6
6
6
7
7
8
8
8
9
10
10
11
12
12
13
Download iTech Wearables App

WHAT’S IN THE BOX?
iTech Active 2 User Guide:
Everything you need to know about the iTech Active 2.
What’s in the box?
Your iTech Active 2 box includes:
• iTech Active 2
(Color and material vary)
• Clamp Charging Cable
The interchangeable straps on the iTech Active 2
come in a variety of colors and materials. Additional
straps for the iTech Active 2 are sold separately
Refer to proper URL or QRCode for additional
bands (that are the proper size).
Charge Your Fitness Tracker
A fully charged ITech Active 2 has an extended battery life of up to 7 - 10 days
(standby time). Battery life and charge cycles vary based on usage.
1. Plug the charging cable into the USB port on your computer or a UL-certified
USB wall charger. We recommend using the USB port on your computer.
2. Insert the iTech Active 2 into the appropriate charging cable section. A charging
screen appears on the screen to indicate that your iTech Active 2 is charging.
Note: Your iTech Active 2 takes
about 1-2 hours to fully charge.

SET UP YOUR FITNESS TRACKER
The free iTech Wearables App is compatible with most iPhones and Android Phones.
A smartphone is required for call, text, and smartphone app notifications.
To get started:
1. Find the iTech Wearables app in one of the
locations below, depending on your smart device
• Apple App Store for iPhones
• Google Play Store for Android Phones
Note: Do not use your mobile device’s bluetooth pairing to pair to the watch. To properly connect your iTech Wearables smart-
watch, follow the pairing instructions within the mobile application. If you have already connected your phone to the smart-
watch disconnect and “forget” the bluetooth connection prior to setting up your watch through the application.
*YOUR DEVICE WILL ONLY WORK WITH THE ITECH WEARABLES APP ACCESSED BY THE QR CODE ABOVE.
For more information, manuals or application information, please visit the Help Center at www.iTechWearables.com
2. Download and install the iTech Wearables App: The application will ask for permissions once in-
stalled and your account has been set up (New Users). We highly encourage the user to allow all
notifications & pairing access to their smartphones for complete functionality.
Android Users: You will be asked to allow the iTech Wearables App to access information in your de-
vice’s native settings once your accout has been set up. Not enabling these settings may prevent the
application from working correctly.
3. Once the app is installed, open it to create an account, following the on-screen prompts to help you
get set up. Once your account is set up, the application will help you connect to your device (We
highly encourage the user to allow all notifications & pairing access to their smartphones.)
4. To connect & sync your fitness tracker to your device, please follow the on screen instructions while
setting up your account.
Power On & Off
Tap and hold the one-touch button on your iTech Active 2
Fitness Tracker for 5 seconds until you see the ITech Active
2 logo appear on the watch screen, indicating the watch has
powered on.
Tap on the one-touch button until you arrive on the Settings
screen. Tap and hold the one-touch button on the ‘Settings’
screen and you will be taken to the settings section of your
iTech Active 2. Continue to tap on the one-touch button until
you see the Power O Icon . Tap and hold the one-touch
button on this screen to fully power off your device.

BASICS
Learn how to best navigate your iTech Active 2.
Motion Gesture
Allows you to rotate your wrist to turn on your watch screen. Tap the ‘Menu’ located on the top left of
the home screen. Then tap on ‘Settings’. From here tap on, ‘Motion Gesture’, to access this function
and set it up. You can control the time in which this feature is Active 2 throughout the day. If you want
this feature to always be on, set the time constraints to be 12:00AM to 12:00AM. Using this feature will
consume more battery.
Changing Watch Faces
Personalize your watch with our built-in watch faces to show-case your favorite ITech Active 2
time-keeping features. The iTech Active 2 comes with 3 interchangeable watch faces.
Change your watch face from the ITech Wearables App:
In the iTech Wearables App, from the Watch Faces page (found in the settings menu in-app), tap on any
of the three watch faces available to update the watch face on your iTech Active 2 fitness tracker.

NAVIGATION TIPS & FEATURES
BASIC NAVIGATION TIPS
Your iTech Active 2 is a one-touch device, you can interact with your device by tap-
ping the one-touch button to navigate through the iTech Active 2. To activate a fea-
ture on your device or to enter certain sections on your device (I.E Settings), simply
tap and hold the one-touch button. Your device will vibrate once you enter
or activate a feature as well.
Here are a few basics to help you get started:
Exiting a section or app on watch: To exit an area you’re in on the watch, tap on
the one-touch button until you see a back button icon. Tap and hold the one-touch
button on this icon to exit a section on the watch.
Haptic Feedback Control: Your watch vibrates to alert you of any notifications or reminders you need.
But sometimes if you don’t want the vibration, it can become a bother. That’s why you can control if you
want vibration on or off for your watch. To turn off vibration on your watch, tap on the one-touch button
until you land on the Settings icon. Tap and hold on the one-touch button to enter this section and navi-
gate to the Do Not Disturb icon. Tap and hold on this icon to turn off vibrations. You can turn this o and
o as you like but it takes 5 minutes once the feature has been activated to begin working. Shutting
off vibration will also provide an even longer battery life.
MAC ID Address: Each iTech Active 2 has a unique ID that can be found on the device. This MAC ID can
help you connect your watch to the iTech Wearables app and ensure you’re connecting the correct watch
to the app. To find this ID on your iTech Active 2, simply tap and hold on the one-touch button on the
see a Bluetooth icon (if you are connected to the iTech Wearbles App).
TIMEKEEPING
Alarms: Alarms vibrate to alert you at a time you have set. Set up to three alarms to
occur once or on multiple days of the week via the ITech Wearables App. To set an
alarm, open the iTech Wearables App, tap menu and head to settings. Tap on Alarms
and then begin setting your alarms for the day and week.
main clock face of your device for 3 seconds. On this screen, you will also see you battery level and you’ll

APPS & FEATURES
NOTIFICATIONS & MESSAGING
The iTech Active 2 can display call, text, social media, and app notifications from your smartphone
to keep you informed. The iTech Active 2 and phone device must be within Bluetooth range of
each other to receive such notifications.
Set Up Notications: Check that the Bluetooth on your phone is on and that your phone can
receive notifications (often under Settings > Notications). Then set up notifications:
1. In the ITech Wearables App, tap the ‘Menu’ icon and tap settings then, go to Watch Notications.
2. From Watch Notications, you may select the notifications you wish to receive on your Fitness tracker.
Note: Notification permissions differ between iOS and Android users.
Viewing Incoming Notications: When your ITech Active 2 and smartphone are within range, notifi-
cations cause the Active 2 to vibrate. If you don’t read the notification when it arrives, you can check it
later by navigating to Messages on your Active 2. To view unopened messages and notifications on your
ITech Active 2, tap on the one-touch button until you see the Messages icon, tap and hold the one-touch
button to reveal the Messages screen. Tap on the one-touch button to navigate through the messages
received on your iTech Active 2 any message found in this section to reveal more information about it. To
exit the messages section, tap on the one-touch button until you have read all messages and the device
will return to the main messages screen.
Manage Notications: ITech Active 2 stores up to 5 notifications, after which the oldest are replaced as
you receive new ones.
Turn o Notications: Turn off all or certain notifications with the ITech Wearables App from Watch No-
tifications in the settings menu. You can also mute all notifications by turning on Do Not Disturb mode,
mentioned above in Basic Navigation Tips.
*Note for Android Users* The ‘Other’ function was created to help provide support for notications you want to re-
ceive on your watch that support hasn’t been built for directly. However, we strongly recommend that Android users
keep this setting off. Android devices display nearly everything in their notication section (screen shots, percentage
of charge, when a song is changed or etc). While ‘Other’ is on, your watch will receive nearly all notications sent to
your Android device.
ACTIVITY & SLEEP
iTech Active 2 continuously tracks a variety of stats whenever you wear it. The information is then
transferred to the ITech Wearables App every time you sync your Active 2. We rec- ommend
syncing your Active 2 to the app at least once a day.
See your core stats: Steps taken, calories burned, and distance covered. Find your complete history and
other information automatically detected by your Fitness tracker in the iTech Wearables App.
Track Daily Goals: iTech Active 2 tracks your progress towards daily goals based on the goals you
set when first setting up your account. When you reach your goal, the app will send you a push
notification that the goal is completed. If a step goal is achieved, your Active 2 will vibrate and
show a celebratory badge.

APPS & FEATURES
SEDENTARY REMINDER
Turn on reminders to move in the app to set a sedentary reminder alert. The sedentary
reminder can be enabled in the Settings Menu by tapping on the ‘Reminder To Move’ selection.
When enabled, this feature is Active 2 during the hours of 10:00 AM - 6:00 PM.
TRACK YOUR SLEEP
Your iTech Active 2 will automatically track your time asleep and sleep stages (deep sleep, light
sleep and time spent awake). To see your sleep quality score and stats, sync your fitness tracker
when you wake up and check the app.
Learn about your sleep habits: ITech Active 2 tracks several sleep metrics including the amount of sleep
you get and provides you with an overall sleep score number for that night. It will track your wake time
and your light sleep time, along with deep sleep. In-app, you can tap on the Sleep card on your main
home screen to see further details about your sleep history. Tapping on your sleep progress graph will
allow you to see even more information by providing you with a ‘Sleep Summary’ for you to review.
HEART RATE
The iTech Active 2 tracks your heartrate throughout the day. To measure and see your
real-time heart rate, navigate to the heart rate feature on your Active 2. Tap and hold on the
one-touch button to begin measuring your heart rate. The watch will then vibrate, indicating it is
reading your heart rate. Once completed, your watch will vibrate again and display your heart rate
measurement.
Continuous Heart Rate: Your device also supports 24/7 heart rate detection. To activate this feature, nav-
igate to settings in the app and tap on Continuous Heart Rate Detection to toggle it on and off. While
this feature is Active 2, your Active 2 will continuously record your heart rate every 30 minutes through-
out the day. This data will automatically sync with your app when your ITech Active 2 is within Bluetooth
range of your smartphone. When continuous heart rate detection is turned on, your sleep statistics are
more accurate. To preserve the iTech Active 2 battery life, turn off continuous heart rate detection.
Not a medical device. This device and related software are not intended for use in the diagnosis of disease or
other conditions, or in the cure, mitigation, treatment or prevention of disease. Users should not interpret or
take clinical action based on the device output without consultation of a qualified healthcare professional.

APPS & FEATURES
FITNESS AND EXERCISE (MULTI-SPORTS MODE)
Track specific exercises, such as running, hiking, football, basketball, and more with your
iTech Active 2. Your iTech Active 2 is equipped with 4 sports modes and 4 workout modes. Each
exercise tracks specific details such as steps, total time, average heart rate, calories and etc.
Some Helpful Tips:
• For data to be saved, the workout/sport you do must be done Active 2ly for at least 3 minutes.
Once you begin a sports mode, the exercise on the watch will show the data points being
collected by the workout/sports mode being performed. If you tap on the one-touch button
during the mode, you will see the ‘PAUSE’ screen and if you tap on the one-touch button again,
you’ll see the ‘STOP’ screen. Tapping on the one-touch button again will take you back to the
main screen for the mode being performed.
• You can perform the sport either near your smartphone or away/not connected to your smart-
phone. Once the device comes within Bluetooth range of your smartphone, it will automatically
sync with the app and the mode will appear on your home/dashboard screen in app.
• Sports modes should be done one at a time. After stopping one mode, ensure that the data is
synced to the app first. Then start your second sports mode. Doing multiple modes at once,
without syncing to the app will cause data you have acquired to be lost.
• The watch will alert you if the activity time is too short to record. Activities not performed for
at least 3 minutes will not be saved to the app/watch.
You can view all of the sports and workout modes you have done for the day as well as the calories
burned doing each activity within the Calories card found on the main home page of the iTech Wear-
ables App.
Workout Modes Included:
• Running
• Elliptical
• Cycling
• Hiking
Sports Modes Included:
• Basketball
• Baseball
• Football
• Soccer

APPS & FEATURES
CONNECTED GPS
For complete workout stats, recap, route and pace information, make sure to use your
smartphone’s connected GPS. Review your exercise history via the ITech Wearables App.
Note: The Connected GPS feature on the ITech Active 2 works with the GPS sensors of your nearby
smartphone.
To use Connected GPS from the main home page of the app, tap on the ‘Menu’ icon and select Run-
ning Mode. A new screen will appear with a start button will appear (iOS users – You may be asked for
location permissions here – Please tap ‘Allow While Using App’ to proceed forward). Tap Start to begin
tracking. Connected GPS mode will be enabled until you pause or completely stop it. This screen will
showcase your heart rate and calories burned. You will have an option to toggle between this screen and
an actual live map of your route. Once completed, you can view your distance traveled and check previ-
ous records of your routes.
FITNESS TRACKER FEATURES
MUSIC REMOTE: To remotely control music from your Active 2, tap on the once touch button to
navigate to the music feature on the ITech Active 2. Tap and hold the one-touch button to enter
the music feature on your device. The music remote allows you to play/pause, skip forward, or
skip to previous music from your music apps. Your ITech Active 2 is compatible with various appli-
cations such as Apple Music, Spotify, and Pandora. However, it may not support other third party
applications.
CAMERA REMOTE: To snap photos using your ITech Active 2, tap on the one-touch button to
navigate to the camera remote function. With the app open, navigate to the settings page and
tap Camera Remote. This will launch the built in app camera (iOS Users: Tapping on Camera
Remote will advise you to open up your native camera to take pictures with your watch). To take
a picture, tap and hold the one-touch button on the Camera Remote icon on your iTech Active 2
fitness tracker or shake your wrist and your phone will take a picture.
ADDITIONAL FEATURES
From the home screen in app, tap on the ‘Menu’ icon and tap ‘Settings’ to view more features available
for your Fitness tracker. Learn more below.
WEATHER: Once your fitness tracker is fully paired to the app, open the ITech Wearables App.
Navigate to the settings page, scroll down and tap on ‘Weather’. Your location should be auto-
matically found or you can enter your location information in manually. Once done, instantly the
watch will update with the latest weather readings. From the Weather screen on your smart-
watch, you can tap and hold the one-touch button to view weather data for the next day. Your
Active 2 shows the weather forecast for the current day and the next day, it also updates hourly
(as long as you are connected with the iTech Wearables application on your mobile phone). You
can also change the units of measurement for temperature here as well.

APPS & FEATURES
ADDITIONAL FEATURES
The weather information is updated every two hours. If your device cannot update the weather
during this timeframe, it will show no information.
This normally will only happen if your phone and device aren’t connected. To correct this, use the
iTech Wearables application to connect your device to your phone again.
*Note For Android Users* When you fully connect to this device, you may see the weather as incorrect
or not matching what you see from the forecast you’re observing. This is due to Android now prevent-
ing some information to be sent from your phone to the watch. Follow the steps above to ensure your
weather data is always updated.
FIND DEVICE: Tap Find Device under Settings to vibrate your ITech Active 2 when paired
with the app.
LANGUAGE: Tap Language under Settings to change the language on your fitness tracker.
Choose from a variety of languages. Note: setting the language on your iTech device does not change
the language setting of the mobile application.
DO NOT DISTURB: Tap Do Not Disturb under settings in app and set a time period to prevent
your Active 2 from receiving all notifications (other than alarms). Once Active 2, it takes 3-5 minutes
to begin working.
TIME FORMAT: Tap on Time Formats under Settings to select between 12 and 24 hour format.
UNIT FORMAT: Tap Units under Settings to change the units of measurement reflected on your Smart-
watch and/or app. Choose between the metric and imperial systems of measurement for your watch.
You can choose other units that you can see in app within this section as well.
HYDRATION REMINDER: Tap on Hydration Reminder to activate this feature. Once Active 2,
you will receive reminders to stay hydrated during the day. In app, you can set your start and end
times as well as how frequent you would like to be reminded.
HYGIENE ASSISTANT: Tap on Hygiene Assistant to activate this feature. Once Active 2, you will
receive reminders to wash your hands during the day. In app, you can set your start and end times
as well as how frequent you would like to be reminded.

UPDATE, RESTART & ERASE
UPDATE, RESTART, AND ERASE
Update Fitness Tracker Firmware If there is a new firmware update available for your ITech Active 2
Fitness Tracker, you will receive a pop-up notification to download it within the ITech Wearables App.
If you do not receive said notification, tap the ‘Menu’ icon and then select settings. Scroll down to
Update Firmware where you will see a red dot on the Update Firmware tab, signifying that an update
is available. Tap the Update button to begin updating your ITech Active 2. Be sure that your fitness
tracker remains within Bluetooth range of your phone while updating. Once your update is complet-
ed, your watch will automatically restart.
Restart Your Active 2: If you can’t sync your ITech Active 2, or if you have trouble with connected
GPS or tracking stats, you can restart your Active 2 from your wrist. On your iTech Active 2, tap on
the one-touch button until you get to the settings icon and tap and hold the one-touch button to en-
ter this section. Tap on the one-touch button to navigate to the Power Off icon. Tap and hold the on
the one-touch button to power off your device. Allow your device a few minutes to fully shut down.
Then tap and hold the one-touch button on your device for 3-5 seconds to turn it back on to com-
plete your restart.
Reset Your Active 2: If you are still having issues with ITech Active 2 syncing data, with connected
GPS, or etc a reset may help fix your issues. You can reset your device on the iTech Active 2 device.
On your iTech Active 2, tap on the one-touch button until you get to the settings icon and tap and
hold the one-touch button to enter this section. Tap on the one-touch button to navigate to the Re-
set icon. Tap and hold the on the one-touch button to reset your device.
WEAR AND CARE
All iTech Wearable products are meant to be worn all day and night, so it’s important to follow a few
simple guidelines as you wear and care for your device.
To keep your band clean and your skin happy, we recommend the following tips:
• Clean your band and wrist regularly - especially after intense workouts or sweating.
• Rinse the band with water or wipe it with a small amount of rubbing alcohol. Do NOT use hand
soap, dish soap, hand sanitizer, cleaning wipes or household cleaners, which could get trapped
beneath the band and irritate your skin.
• Always pat dry the band before putting it back on
skin irritation or allergy from a wearable device. If you start to experience skin irritation or redness on
your wrist, remove your device. Contact a dermatologist if symptoms persist longer than 2-3 days of
not using your wearable device.
Note: Although the iTech Active 2 is IP65 water resistant, it is not IP68 waterproof which
means you should not submerge your Active 2 in water and we advise you not to swim
with your device. However, your iTech Active 2 can withstand many splashes, rain, and
daily activities such as washing dishes. If your Active 2 gets wet, we advise to remove
it until dry. It is not good for your skin to wear a wet band for long periods of time.
IMPORTANT TIPS: If you have allergies, asthma, or eczema, you may be more likely to experience a

REGULATORY & SAFETY NOTICES
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes
or modifications to this device not explicitly approved by the manufacturer could void
your authority to operate this equipment. This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be located or operated in conjunction
with any other antenna or transmitter.
NON-MEDICAL DEVICE
This iTech Wearables product is NOT a medical device. This device and related software and
applcations are NOT intended for use in the diagnosis of disease or other conditions, or in
the cure, mitigation, treatment or prevention of disease. Users should NOT interpret or take
clinical action based on the device output without consultation of a qualified healthcare
professional.
REGULATORY & SAFETY NOTICES
FCC ID: 2AS3P-ITACT2