I-Tech EMCMW2380-4K-PCAP-V1 User manual

SPECIFICATION:
LCD Panel 23.8"
Resolution 3840x2160
Brightness LED-300nits
Signal Input VGA+2*HDMI signal input ports, with M12 metal type connector Handmade cables
with heat-shrinkable PE tubing on display end
*** Note: Only HDMI1 supports 3840x2160@60Hz, other inputs (VGA & HDMI2) support
FHD@60Hz***
Touch Projected Capacitive Touch, USB interface
Color Black
Temperature Working Temp(0~50°C), Storage Temp(-10~60°C)
Mounting VESA 100x100 mm (Extra Mounting-BK with Damper)
Power 12 & 28VDC input with Terminal Block [ MIL-STD-704E ]
MIL Specs EMI / EMC: MIL-STD-461E Airborne application
Vibration / Shock: MIL-STD-810
Chassis LCD Display for Airborne application LCD Panel, 23.8"-
3840x2160, LED-300nits VGA+2*HDMI signal input ports, with M12
metal type connector Handmade cables with heat-shrinkable PE
tubing on display end Projected Capacitive Touch, USB interface
Model: EMCMW2380-4K-PCAP-V1
i-Tech Company LLC
TOLL FREE: (888) 483
-
2418 • EMAIL
:
inf[email protected]om
• WEB:
www.iTechLCD.com
FEATURES:
 Modular mechanism design provides flexible product configuration and easy maintenance.
 Optional to built-in touch screen for interactive application.
 Available with auto-brightness sensor offers application in day and night.
 VGA connector with optional AV,SV,AV-Looping
 Complete custom design/solution for OEM customers
MILITARY CHASSIS LCD DISPLAY
Power Input: 12VDC to 28VDC, 30 Watts
HDMI 1: 3840x2160@60Hz
HDMI 2: 1920x1080@60Hz
VGA: 1920x1080@60Hz
USB: USB interface of PCAP touch (2 points)

MILITARY CHASSIS LCD DISPLAY
MECHANICAL DRAWING:

LCD OPTIONS:
LED Backlight Options
Introducing LED backlight options for monitors for energy efficiency and a brighter screen.
VIDEO Input Options:
For Video inputs options:
DVI, DVI+HDMI, SVideo+AV, SVideo+AV+DVI, AV+Looping, DVI+AV+Looping, HD-SDI, BNC(PAL/NTSC)
Optical Bonding Options
- Optical Bonding provides the best reduction of ambient light washout of any commercially
available enhancement technology.
- Optical Bonding has a lower cost than most other competing technologies.
- Optical Bonding offers superior ruggedization, enhancing the display durability under vibration,
shock and other environmental extremes.
RS-232 Remote Control Options
Remote Control Protocol: Command Code to set system
9-36V DC Input Options
iTech offers a selection of DC input from 9V to 36V
Light Sensor and Motion Sensor Options
iTech LCD offers Light and Motion Sensor
Privacy Filter
Front Glass Options:
- Anti Reflective AR Glass 3mm
- Anti Reflective AR Glass 6mm Vandal-Resistance
- Anti Reflective AR Glass 8mm Vandal-Resistance
- Anti Glare AG Glass 3mm
MILITARY CHASSIS LCD DISPLAY
i-Tech Company LLC
TOLL FREE: (888) 483
-
2418 • EMAIL
:
inf[email protected]om
• WEB:
www.iTechLCD.com

1. Main Menu :
If push the “ MENU” key the screen will appear this main menu page, you can use the
“UP” or“ADJ. +” AND “Down” or “ADJ. –“ key ( Shown in Pic1 ) to select the function you
need.
The end of this page will be shown the working resolution and frequency.
a. Display Mode
Press the and buttons to move between options.As you move from one icon to another,
the option name is highlighted.
Choose the Display Mode for 1P , 2P
Display Mode
1P
2P
1/2P Right Left
1/2P Up down
PIP
i-Tech Company LLC
TOLL FREE: [phone] • EMAIL: [email protected] • WEB: www.iTechLCD.com
OSD MANUAL

b. Display Function
Display Rotate, Set to rotate the OSD menu
OSD Rotated: OFF / 90 / 270
c. Picture
b-1 Backlight
If select BackLight function, you can push ADJ+ orADJ- key to increase or
decrease backlight current of the inverter.
BackLight
50
i-Tech Company LLC
TOLL FREE: [phone] • EMAIL: [email protected] • WEB: www.iTechLCD.com

c-2. Brightness
If select Brightness function, you can push ADJ+ or ADJ- key to increase or decrease
offset setting.
c-3.Contrast
Adjusts the image CONTRAST in relationship to the background. Press“< ” or “>” to
adjust.
c-4. Sharpness
Adjusts the crispness of the image. Press“< ” or “>”to adjust.
Brightness
50
Contrast
50
i-Tech Company LLC
TOLL FREE: [phone] • EMAIL: [email protected] • WEB: www.iTechLCD.com

d. Analog
Select Screen Setting function , that will into the sub-page to adjust display’s
function of the picture.
d-1. Auto Adjust
Select this function on OSD MAIN MENU and push the MENU key.
In this function, that will be activated the auto adjusting for the picture.
Auto Adjust
d-2. H-Position
If select H Position function, you can pushADJ+ orADJ- key to shift to Right or Left of
the picture.
H-Position
50
i-Tech Company LLC
TOLL FREE: [phone] • EMAIL: [email protected] • WEB: www.iTechLCD.com

d-3. V-Position
If select V Position function, you can push ADJ+ or ADJ- key to shift to Up or Down of
the picture.
d-4. Clock
If select Clock function,you can push ADJ+ or ADJ- key to increase or decrease video
H Size of the picture.
e. Color
e-1. Panel Uniformity: Uniform the brightness and colour temperature was across the
screen, as well as identify any leakage from the backlight in dark lighting conditions.
e-2. Gamma: GAMMA SELECTION Select a display gamma value for best picture quality.
e-3. Temperature:Adjusts the color temperature of the entire screen.A low color
temperature will make the screen reddish. Ahigh color temperature will make the screen
bluish.
V-Position
50
Clock
50
i-Tech Company LLC
TOLL FREE: [phone] • EMAIL: [email protected] • WEB: www.iTechLCD.com

f. Advance
If your monitor does not operate normally or cannot be turned on, please check the
following troubleshooting questions. Remember also to check any other connected
electronic device, such as DVD or Blu-ray player to pinpoint the problem.
f-1. Aspect Ratio: Adjust theAspect Ratio settings in the SETUP menu or press the
ASPECT button on the remote control. Pictures appear in wrong ratio
g. Signel Input source
Use the Input Source menu to select between different video inputs that are be
connected to your monitor.
i-Tech Company LLC
TOLL FREE: [phone] • EMAIL: [email protected] • WEB: www.iTechLCD.com

i-Tech Test Report Page 1
Test Report
Customer: ElectroWing Technologies Pvt. Ltd.
Customer PO No: EWT/PO-027/2019-2020
i-Tech Sales Order No: 108965
Part No: ECH1040XWT-TR x 3 pcs and EWT-EMCMW2380-4K-PCAP-V1 x 1 pcs
Burn in Test
Testing Program: checkit (4 hours)
Serial No.
Burn Test
S/N # 8119110000329-108965 to 8119110000331-108965
√
S/N# 8119110000328-108965
√
Tested by: _________________ Date: _________________
Approved by: ______________ Date: _________________
i-Tech Company LLC.
42978 Osgood Road. Fremont CA 94539
Tel:[phone]
Fax: [phone]
Email: [e-mail]
Website: www.itechlcd.com
Alan Chung
Felipe Briones
12/19/2019
12/18/2019