I-Tech UltraView iOP40W User manual

UserManual
InnovativeLCDDisplaySolutions
OP-40W/OP-40WT
ltraView

Jan 05
P.1
OP40WTSeriesUserManual
1.TableofContent Page.1
2.Introduction
A)OverviewPage.2
B)FeaturesPage.2
C)Dimension DiagramsPage.3
D)TechnicalSpecificationsPage.4
3.Installation
A)Package ContentsPage.5
B)Cautiontothe userPage.5
C)Cleaning Page.5
D)PrecautionsPage.6-7
4.Using theSystem
A)Product ViewsPage.8
B)I/O OutletPage.9
C)Installation ProceduresPage.10
D)Setup Touchscreen(Optional)Page.11
i) ForWindows Page.11
ii) ForDOS Page.12-14
E)OSDSwitchPage.15
F)OSDControlPage.16-23
G)RemoteControl(Optional)Page.24
1. Tableof Content
Disclaimer
Thisinformation issubjecttochange withoutnotice.Theproducerofthismanual acceptsno
responsibilityfordamage orclaims,resulting frommisuseormisinterpretation.

Jan 05
P.2
Disclaimer
Thisinformation issubjecttochange withoutnotice.Theproducerofthismanual acceptsno
responsibilityfordamage orclaims,resulting frommisuseormisinterpretation
A.Overview
B.Features
2.Introduction
OP40WTSeriesUserManual
ThisLCD monitorincorporates40 coloractivematrixthin-film-transistor(TFT)
liquidcrystaldisplaytoprovide superiordisplayperformance.Amaximumreso-
lutionof1,366x768 isidealfordisplaying complexgraphics and high definition
images.Otheroutstanding designsthatenhancethisLCD monitor’sperformance
arePlug &Playcompatibilityand OSD(OnScreen Display)controls.
High contrastcolorTFTLCD displaysupport resolution up to1,366 x768.
Advanced OSDcontrolforpicturequalityadjustment.
Slimand compact size
Wide Viewing Angle

Jan 05
P.3
OP-40WTseries
C.DimensionDiagrams
2.Introduction
Disclaimer
Thisinformation issubjecttochange withoutnotice.Theproducerofthismanual acceptsno
responsibilityfordamage orclaims,resulting frommisuseormisinterpretation.
OP40WTSeriesUserManual

Jan 05
P.4
2.Introduction
Technical Specifications
Monitor
PanelSamSung40"Widescreen LCD Panel
DisplayType TFT LCD activematrixcolor
Resolutions1,366x768
ResponseTimeTr=10ms, Tf=6ms
Contrast Ratio800:1typical
Brightness 500cd/m2typical
PixelPitch0.648x0.216mm
PanelColor16.7Mdisplaycolor
ViewingAngle85 / 85/85/ 85(L/ R/U/ D)
StorageTemp.-20°to65°C
OperatingTemp.0°to50°C
MTBF50,000hours(Min.)
PowerSupply PowerSupply110V-220VACInput
CableLengthof Power
Cord 182cm
Connectors
ScartVideo Scart21-pin(female)x1
RCAVideo CompositeVideo (female)x1
RCAAudioCompositeAudio(female)x2in/out
S-videoS-video(female)x1
ComponentVideo Component (Y/Pb/Pr) x1
VGAHDD D-sub 15 Pin(female)x1
DVI-DDVI-Dx1
RFTVAntenna Availableintelevisionmodelonly
Product
Dimension
OPSeries: 980(W)x630(H)x90(D)mm
Packing
DimensionOPSeries: 1201(W)x851(H)x330(D)mm
Net/ Gross
Weight OPSeries: 18Kg/28 Kg
Disclaimer
Thisinformation issubjecttochange withoutnotice.Theproducerofthismanual acceptsno
responsibilityfordamage orclaims,resulting frommisuseormisinterpretation.
OP40WTSeriesUserManual

Afterunpacking the carton,check and see ifthefollowingitemsareincluded in
good condition.Contactyoursupplierassoonaspossibleforreplacingthe
missing / damaged items.
40 TFT LCD monitor
VGACable(MaletoMale)
PowerCord
UserManual
CD Disc
ToassurecontinuedFCC compliance,pleaseusegrounded powersupply
cordand the provided shielded video interfacecablewithbonded ferritecores.
If aBNC cableisgoingtobe used,useonlyashielded BNC (5)cable.Also,
TheFederalCommunicationsCommissionwarnstheuserthatany
unauthorized changesormodificationstothe unitifnot expresslyapprovedby
thepartyresponsibleforcompliancecouldvoidtheuser'sauthorityof
operatingthe equipment.
1.Gentlywipe screen withaclean camelhairlensbrush,orasoft,clean,
lint-free cloth.Thisremovesdustand otherparticlesthatcan scratchthe
screen.
2.Donotapplyexcessivepressuretothescreensurfacewhen wiping itclean
becausethismaydamage the LCD.
3.Donot pourorsprayanyliquiddirectlyontothescreen orcaseof the LCD
monitor.Chemicalcleanershavebeenreported todamage thescreen or
caseof theLCD monitor.
A.PackageContents
Jan 05
P.5
B.Caution totheusers
C.Cleaning
3.Installation
OP40WTSeriesUserManual

Jan 05
P.6
Read allof theseinstructionsandsavethemforlateruse. Followallwarnings
and instructionson the product.
Product
Donot coverorblock the vent holesinthe case.
Donotinsertsharpobjectsorspillliquidintothe LCD monitorthrough
cabinet slots.Theymaycauseaccidentfire,electricshock orfailure.
Disconnect thepowerplug fromthe ACoutletif you willnot useit foran
indefiniteperiod oftime.
Donotattempttoservicethisproductyourself,asopening orremoving
coversmayexposeyou todangerousvoltage pointsorotherrisks.
Donottouchthe screendirectlywithyourfingers.You maydamage the
screen, and oilfromyourskinindifficult tomove.
Donot applypressuretoscreen. TheLCD isverydelicate.
D.Precautions
Power
1.Usethe type of powerindicatedon the markinglabel.
Plugs
1.Donotremoveanyof the prongsofthemonitor’sthree-pronged power
plug.
2.DisconnectthepowerplugfromtheACoutletunderfollowing
conditions
If the product willnot be used foran indefiniteperiod time.
Whenthe powercordorplug isdamaged orfrayed.
Iftheproductdoesnotoperatenormallywhentheoperating
instructionsarefollowed.
Adjustonlythosecontrolsthatarecoveredbytheoperating
instructions.Improperadjustment of othercontrolsmayresult in
damageandwilloftenrequireextensiveworkbyaqualified
technician torestoretheproduct tonormaloperation.
If the producthasbeen dropped orthe cabinet hasbeen damaged.
If the productexhibitsadistinctchangeinperformance,indicatinga
need forservice.
3.Installation
OP40WTSeriesUserManual

Jan 05
P.7
D.Precautions(Cont.)
Powerandextensioncords
1.Donot allowanything torest onthe powercord.
2.Donotlocatethisproduct wherepersonswillwalkon the cord.
3.Usethe properpowercordwithcorrectattachmentplug type.If the
powersourceis120VAC,useapowercordthathasULand C-UL
approvals.If the powersourceisa240VACsupply,usethe tandem
(Tblade)type attachmentplug withground conductorpowercordthat
meetsthe respectiveEuropeancountry’ssafetyregulations,suchas
VDEforGermany.
4.Donot overloadwall outletsorpowercords. Ensurethat the totalof all
unitspluggedintothe walloutlet doesnot exceed 10 amperes.
5.Ensurethatthetotalampereratingsonallunitspluggedintothe
extension cordisnotabovethe cord’srating.
6.Ifthepowersupplycord,whichcamewithyourmonitor,istobe
connected tothePCinstead ofthe walloutlet,thisequipmentistobe
usedwithUL/TÜVapprovedcomputerswithreceptaclerated
100~240VAC, 50/60Hz,1.0A(minimum).
Environment
1.Placethemonitoronaflatand leveledsurface.
2.Placethemonitorinawell-ventilated place.
3.Keep the monitorawayfrom Overlyhot, coldorhumidplaces,places
directlyundersunlight, dustysurroundings,equipmentthatgenerate
strong magneticfields.
OP-40WTSeriesUserManual
3.Installation

A.ProductViews(Cont.)
OPSeries-Front View
OPSeries-Rear View
Jan 05
P.8
4. Usingthe System
OP-40WTSeriesUserManual

Jan 05
P.9
(1)ACIN Connecttopowercord.
(2)SCARTIN Connectto21pinScart connector.
(3)RCAINConnecttothecompositeRCAvideo connector.
(4)AudioINConnect tothe RCAaudioconnectors.
(5)S-VideoIN: Connect tothe S-video connector.
(6)AudioOUT : ConnecttotheRCAaudioconnectors.
(7)ComponentVideoIN ConnecttoComponent Video connectors.
(8)VGAIN Connecttothe15pinsub-Dconnector.
(9)DVI-DIN ConnecttotheDVI-Dconnector.
(10)AntennaIN ConnecttotheTVantenna connector.
B.I/OOutlet
Front
OPSeries
4. Usingthe System
(1) (2) (3) (4) (5) (6) (7)(8) (9) (10)
OP-40WTSeriesUserManual

Jan 05
P.10
C.InstallationProcedures
Thismonitorisequipped withanauto-sensingpowersupplyfor
voltageranges100~240V,50~60Hz.Pleasefollowthe following
instructiontoinstall LCD monitor.
1.Makesure that the systempower isturnedoff.
2.Plug the signalcabletothe signalconnector atthe rear of
PCandtherearof theLCD monitor.
3.Plug thepowercord tothe rear viewofthe LCD and switch
on.
4.Connectthepowercord topower source.
5.Turn onthe computerand the monitor.
6.Then pushtheOSDmenu buttonandusetheAutoAdjust
function tofinethebest mode ofyourcomputer.
4. Usingthe System
OP-40WTSeriesUserManual

D.Setup Touchscreen
Touchscreen used forUltraViewproductsaremanufactured by3M. Hereprovide
TouchWareTM Softwareincludestouchscreen driversforyourinstalling.
For Windows95, 98, Me,NT4.0, 2000 & XP
1.Open the driverCD providedalongwiththe product ordownloadthe driver
fromourWebsite.
2.Makesureyou havecompleted the appropriatehardwareconnections.
3.Poweron yoursystem. Makesureno otherapplicationareopened.
4.Doubleclickthe “TW564SR4.exe files.
5.Unzipthe fileand saveitinadefault folder
6.Followthe onscreen instructionstobeginthe installation.
Jan 05
P.11
Note: ChooseExpressoptionforautomaticallyinstallsthe required TouchWareTM
softwarefiles, createaTouchWareTM softwareprogramfiles,and placea
TouchWareTM softwareicon ontheWindowsdesktopandcontrol panel.
TouchWareTM willalsodetermine multiplemonitorconfigurationsatthistime.
Note: Rememberthe pathof the default folderorcreateanew folderbyyourdecision.
Note: FordetailsofCustomoption,pleaserefertothe websiteof3Mand download the
userguide of TouchWareTM software.
(http:// www.3m.com/3MTouchSystems/downloads/tecdoc.jhtml)
Note: If you haveaMicrosoft®IntelliPoint®orKensington®Mousework®PS/2
mouse, installingTouchWareTM softwarewilldisablethe specialmouse
functionallyofthesedevices
Note: Toconfigurethesettingsofthetouchscreen,pleaserefertothe
TouchWareTM UserGuideline
4. Usingthe System
OP-40WTSeriesUserManual

Jan 05
P.12
D.Setup Touchscreen
For Windows95, 98, Me,NT4.0, 2000 & XP(Cont.)
7.Onceinstallationiscomplete, restart the system. Asthe systemrestarts,
Windowsdetectsand loadsthe driver.
Forserialcontrollers,restart the system. Asthesystemrestarts,Win-
dowsdetectsand loadthe driver
ForUSB controllers, connect thetouchscreencabletotheUSB portin
yourcomputer. Afterafewseconds, the systembeepstoindicateit has
detected the touchscreen andloaded the driver.
For DOS
Whenyou installTouchwarefromDOS, the Installprogramonlyloadsthe
touchscreenfilesspecifictoDOS. Theinstallationincludesthe following files:
Touchscreen driverforDOS
Touchscreen controlpanelforDOS
Pen Configuration utilityforDOS
MicrocalDiagnosticutility
ThruGlasscontrolpanelforDOS
DOShelpfiles
If you do not plantouseanyofthe touchscreen filesforwindows, you maywant
toinstalljust the DOStouchscreen files.
1.Open the driverCD providedalongwiththe product ordownloadthe driver
fromourWebsite.
2.Makesureyou havecompleted the appropriatehardwareconnections.If
not, the Installprogramcannot properlyconfigurethe touchscreen.
3.Closeallapplicationsand exitfromWindows.
4.Insert theTouchWareDisk intoadiskettedrive.
5.Access the DOScommand line prompt.
6.Change tothe drivethathastheTouchWarediskette. Forexample, enter A:
if youinserted the TouchWaredisketteinDriveA.
Note: Thisstep isnotnecessary forWindows2000 orabovesystem,The driverloads
automatically.
4. Usingthe System
OP-40WTSeriesUserManual

Jan 05
P.13
D.Setup Touchscreen
For DOS(Cont.)
7.Type INSTALL followed bythe sourcedisk drive,the destination drive,and
the destination directory.
Forexample,the followingcommand copiesthe filesfromDriveA(source
drive)toDriveC(destinationdrive)and the \MTS\TOUCH directory:
INSTALL A:C:\MTS\TOUCH
8.Press Enter.The systemreportsthatitisabouttocopytheDOStouchscreen
filesand prompt forconfirmation that you want tocontinue.
9.Press C tostart the installation.
First,theInstallprogramcopiesallDOStouchscreenfilesfromthe
TouchWarediskettetothespecified destinationdriveanddirectory.
Next, the Installprogramautomaticallysearched through the system
and configuresthetouchscreentothe properCOMport,interrupt,and
communication rate.
Finally,the Install programpromptsifyou wantittoautomaticallymodify
yourAUTOEXEC.BATfile
If you letthe InstallprogrammodifyyourAUTOEXEC.BATfile,thesystem
automaticallyloadsthe DOStouchscreendriverwheneveryoustartyour
computer.
If you do notletthe InstallprogrammodifyyourAUTOEXEC.BATfile,you
mustload theDOStouchscreen driverbeforeusingaDOStouchapplication.
Formoreinformation,referto “Loading the DOSTouchscreen Driver inthe
next page
4. Usingthe System
OP-40WTSeriesUserManual

Jan 05
P.14
D.Setup Touchscreen
For DOS(Cont.)
LoadingtheDOSTouchscreenDriver
Afteryou installthe filesfortheDOStouchscreen driver, you must loadthe driver
beforeyou can run aDOStouchapplication oropen the DOSTouchscreen
controlpanel.
You can runthe DOStouchscreendriverfromafull-screen DOSsession within
Windows. However, the Windowstouchscreendrivercannotbe running. Error
message reads: “Windowsx.xisrunningin386Enhanced mode. Devicenot
found.
Thismeanseitherthe WindowsTouchscreen driverisloaded orthe COMport/
IRQ designationsareincorrect.
You can manuallyload the DOStouchscreen driverwhen needed, oryou canlet
the systemautomaticallyload the driverwhenyou startup yourcomputer.
Tomanuallyload the DOStouchscreendriver:
1.Closeallapplicationsand exitfromWindows.
2.Access the DOScommand line prompt.
3.Usethe Change Directory(cd)command toswitchtothe directorythat
hasthe DOStouchdriverfiles. Bydefault, the Installprogramloads
TouchWareintothe C:\MTS|TOUCH directory.
4.Type DOSTOUCH andthenpress Enter.The systemdisplays amessage
that the driverisnowinstalled. Forexample:
MicroTouch Mouse Emulator - Version x.x
Copyright ©1990 - 1997 MicroTouch Systems, Inc.
Driver Installed
Toautomaticallyloadthe DOStouchscreen driverwhen you startup your
computer, add the followingline toyourAUTOEXEC.BATfile:
drive-designator:\directory\DOSTOUCH
wheredrive-designatorand directorydefinethelocation (disk and path)of
the filesforthe DOStouchscreen. Forexample:
C:\MTS\TOUCH\DOSTOUCH
4. Usingthe System
OP-40WTSeriesUserManual

Jan 05
P.15
E.OSDSwitch
OSDButtons(FromTop toBottom)
PowerSwitch: Thisbuttonisused topowerON/OFF theLCD
Menu:Thisbuttonisused toenterOSDmainMenu
Select: Thisbutton isusedtoselectforcompositevideo in-
put, RGBforVGAinput,S-Video forS-Video,Scart
forScartsignalinput,DVI-DforDVIdigitalsignal
input and TV(Optional)input.
Right (à):Thisbuttonisused toadjust the manualtoRight
Left (ß):Thisbuttonisused toadjust the manualtoLeft
Up(é): Thisbutton isusedtoadjust the manualUpward
Down(ê):Thisbutton isusedtoadjustthe manualDownward
Stepstoenterthe OSDforfunction select:
Pushthe “Menu buttontoshowthe OSDon the screen.
Push ‘â’& ‘á’toselectthe suitablecategory
Push “Menu button twicetoenterthecategory.
Push ’â’,’á’,’é’& ’ä’toselect thesuitablefunction
Push“Select button toconfirmthe functionand exitthe OSD
4. Usingthe System
OP-40WTSeriesUserManual

Jan 05
P.16
F.OSDControl
4. Usingthe System
MainMenu
PictureParameters
ToenterintotheBrightness,Contrast,Saturation,Hue,ColorTemp,
Flashtoneand Sharpness sub-menu
PCParameters
ToenterintoAutoadjust, Clock,phase, Position andAutoColorsub-menu
AudioSetting
Toenterintothe Bass,Treble, Balance, Volumeand Mutesub menu
PictureInPicture(Optional)
Toenterintothe PIPSizeand PIPPosition sub-menu
Channel Settings(Optional)
Toenterintothe System,AutoStore,ManualStore,Sortand Deletesub-
menu
General Settings
Toenterintothe OSDLanguage, OSDPosition, OSDTimeout , Sleep
Time, I/PInfo, FactoryReset, Transparency and Deinterlacersub-menu
HUE
SATURATION
CONTRAST
BRIGHTNESS
FLESHTONE
PICTUREPARAMETERS
SHARPNESS
OP-40WTSeriesUserManual

Jan 05
P.17
F.OSDControl
4. Usingthe System
F.OSDControl
PictureParameters
Brightness
Toperformbrightness adjustment of the inputsignal
Usethe Left ‘á’&Right ’â'buttontoadjust “Brightness from0-100
Contrast
Toadjust the contrastlevelof theinput signal
Usethe Left ‘á’&Right ’â’button toadjust “Contrast from0-100
Saturation
Toadjust the saturationlevelof the input signal
Usethe Left ‘á’&Right ’â’button toadjust “Saturation from0-100
Hue
Toadjust the Hue levelof the inputsignal
Usethe Left ‘á’&Right ’â’button toadjust “Hue from(–19)-0-(+19)
Fleshtone
Toon/off the Flesfhtone ofthe input signal
Usethe ’Select’toactivatethe “Fleshtone function
Sharpness
Toadjust the sharpnesslevelof the inputsignal
Usethe Left ‘á’&Right ’â’button toadjust “Sharpness from0-100
HUE
SATURATION
CONTRAST
BRIGHTNESS
FLESHTONE
PICTUREPARAMETERS
SHARPNESS
OP-40WTSeriesUserManual

Jan 05
P.18
F.OSDControl
4. Usingthe System
F.OSDControl
PCParameters
Auto
Toperformautoadjustment of the screen output
Usethe Left ‘á’&Right ’â'buttontoselect Yes/Nofor “Auto-adjust
Clock
Toadjust input videosampling clock
Usethe Left ’á'&Right ’â’button toadjust “Clock , from0-100
Phase
Toadjust input videosampling clock’sphase
Usethe Left ’á'&Right ’â’button toadjust “phase , from0-255
Position
Toadjust the horizontaland verticalpositionof the frame
UsetheL ’á’,R ’â’,U ’é’&D ’ä’buttontoadjust “H.position &
“V.position .
AutoClock
Toperformautoclock adjustment of the screenoutput
Usethe Left ‘á’&Right ’â'buttontoselect Yes/Nofor “AutoClock
PCPARAMETERS
POSITION
PHASE
CLOCK
AUTO
AUTOCLOCK
OP-40WTSeriesUserManual