I-Tech KK1500-TR Installation and operating instructions


Touch Dis
p
la
y
LCD Monito
r
User Manual
Installation Guide
15” Resistive Touch LCD Monitor
MODEL: KK1500-TR
i-Tech Company LLC
TOLL FREE: [phone]
EMAIL: [e-mail]
WEB: www.iTechLCD.com


U
Us se er r M Ma an nu ua al l / / I In ns st ta al ll la at ti io on n G Gu ui id de e
1
15 5" " R Re es si is st ti iv ve e T To ou uc ch h M Mo on ni it to or r
Warning! It will cause malfunction if the monitor is operating with unspecified power
supply unit or incorrect power voltage. Do not exposure this unit in the rain or moisture
environment to reduce the risk of fire or electric shock.
Content:
I. FCC Warning Statement.................................................................................1
II. Introduction.....................................................................................................2
Features......................................................................................................................................2
Unpacking the monitor..............................................................................................................3
III. Installation.......................................................................................................4
I/O placement.............................................................................................................................4
To PC .........................................................................................................................................4
Touch Driver installation...........................................................................................................5
MSR installation (optional) .......................................................................................................9
VFD (optional).........................................................................................................................10
Control Buttons........................................................................................................................12
Structure of OSD settings........................................................................................................13
IV. For your safety..............................................................................................14
V. Support timing chart:...................................................................................14
VI. Mechanical Dimension................................................................................. 15
VII. Product General Specification ....................................................................16

Version. 1.0 1
I. FCC Warning Statement
WARNING
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Notice:
(1) A Unshielded-type power cord is required in order to meet FCC emission limits and also to
prevent interference to the nearby radio and television reception. It is essential that only the
supplied power cord by used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Version. 1.0 2
II. Introduction
15" Resistive Touch Monitor is color TFT LCD monitor, integrate with ELO or TWN resistive touch,
suitable for many types of application. Optional MSR and 2nd display, please contact our regional
distributor for further information.
Features
-Optimal display resolution 1024 * 768
-VESA 75 * 75 mm wall mount standard
-Durable and sturdy base design
-Optional 3 tracks Magnetic Strip Reader (MSR)
-Optional variety of 2nd display (8.4”)
-Adjustable viewing angel freely up to 90 degrees horizontally
-Low power consumption only 20W with CCFL backlight

Version. 1.0 3
Unpacking the monitor
-Put the monitor on a clean surface, make sure the box in upright position.
-Remove packing materials from inside of box.
Check accessory
Please make sure all the accessory are included:
Standard Items
a. b. c.
d. e. f.
Optional Items
a. b.
a. MSR b. 2nd display ( 8.4” )
a. LCD Monitor b. VGA cable
c. Touch driver / User Manual CD d. Touch cable (USB or RS232)
e. Power adaptor f. Power cable

Version. 1.0 4
III. Installation
I/O placement
1 DC JACK 2 DVI
3 VGA 4 USB B Type
5 Dual USB AType 6 RS232
7 RJ45(RS232)
To PC
1. Connect VGA cable from monitor to PC
2. Connect USB touch cable to PC
3. Connect DC plug to monitor and the other side to wall outlet
1 2 3 4 5 6 7

Version. 1.0 5
Touch Driver installation
TWN Touch：
1. Double click “setup.exe” from driver menu 2. Click “next” from welcome window
3. Click “next” from choose destination location window 4. Click “next” from ready to install the program
5.Click“next”fromsetuptype 6.Click“finish”whensetupcompleted

Version. 1.0 6
Calibration procedures:
1. Double click “POS Touch+” icon to run calibration function
2. Follow 9 points linearity calibration procedures and save the data
3. Follow free draw calibration
4. Exit calibration menu
5. Reboot PC

Version. 1.0 7
ELO Touch：
1.Install ELO Touch screen Driver 2. Click “Unzip” from WinZip
Self-Extractor-ELO_v463.exe
3. Click “next” from Select Language 4.Select Install Serial or USB Touch screen
Driver
5.Click-on“Yes”afterInstallation 6.Click-on“Finish”

Version. 1.0 8
Calibration procedures:
1. Double click “Elo Touch screen” icon to run calibration function
2. Follow 3 points linearity calibration procedures and save the data
3. Exit calibration menu

Version. 1.0 9
MSR
Screws
MSR installation (optional)
Components of MSR Kit:
1. Open the MSR back cover.
2. Connect the USB cable.
3. Fasten the screws (x2).
4. Close the MSR back cover and fasten screw (x1).
❶
❷
❹
❸

Version. 1.0 10
VFD (optional)
Components of VFD Kit:
Screw
VFD
3. Connect the VFD cable to the COM port of the monitor.
4. Place the Hinge Cover onto the rear side of the display.
1. Remove the screws (x3).
2. Open the Hinge Cover and I/O Cover

Version. 1.0 11
3. Fasten the screws (x2) to fix the VFD bracket to the Hinge bracket.
4. Fix the Stand by fastens the screws (x2).

Version. 1.0 12
Control Buttons
Auto Adjusting
a.) Pressing to execute AUTO-Adjusting function. This function will set the
monitordisplayareatotheoptimalposition.
b.) Sometimes this function can't achieve the optimal effects. Please follow
the manual adjusting procedure.
Menu
When the light bar move other item, the key are used to select it, and read to
adjust. Press the MENU key to activate the On Screen Display (OSD). Press
twice to turn off the OSD. After 30 sec idle times, the OSD screen will
automatically turn off.
Power Use the power switch to turn the power ON or OFF. We recommend to turn
your system power on first, then the LCD monitor.
Up
Down
a.) When OSD mode is activated (When “MENU” key is pressed). The two
keysareusedtoselecttheadjustmentitems.
b.) When adjustment item is selected, the two keys are defined to decrease
or increase the value of each selected item.

Version. 1.0 13
Structure of OSD settings
First Level Second Level Third
Level Operating Procedure
Auto Adjust Press “UP” or “DOWN” to adjust H-phase &
H-position & V-position clock automatically.
Luminance Brightness Contrast
Exit
Press “UP” key to increase brightness, “DOWN”
key to decrease brightness.
Press “UP” key to increase contrast, “DOWN” key
to decrease contrast.
Geometry
H. Position
V. Position
Clock
Phase
Exit
Press “UP” key to shift screen right, “DOWN” key
to shift screen left.
Press “UP” key to shift picture upward, “DOWN”
key to shift picture downward.
Adjust sampling clock of analog to digital
converter until clock is equal to pixel frequency of
video input.
By varying this “UP” “DOWN” control the exact
sampling time within the pixel can be adjusted.
9300K
6500K
5800K
User Preset
Red
Gree
n
Blue
Exit
Color
Exit
Press “UP” or “DOWN” to choose three types of
color temperature 9300°k, 6500°k and user
define.
OSD
H. Position
V. Position
OSD Timeout
Exit
Adjust OSD frame horizontal location, press “UP”
key to shift frame right, “DOWN” key to shift frame
left , timeout and preset OSD.
Adjust OSD frame vertical location, press “UP”
key to shift frame upward, “UP” key to shift frame
downward , timeout and preset OSD.
Language
English
French
German
Italian
Spanish
Japanese
T. Chinese
S. Chinese
Press “UP” or “DOWN” to choose any one of the
following language, English, French, Germany,
Italy, Spain , Japanese, Traditional Chinese and
Simplified Chinese.
Recall Color Recall Recall All
Exit Recall the default value.
Miscellaneou
s
Sharpness
Display
Information
Exit
Press “UP” key to increase sharpness, “DOWN”
key to decrease sharpness.
Main
Men
u
Exit

Version. 1.0 14
IV.For your safety
1. When move the monitor, always switch off power and disconnect all cables to avoid any
danger.
2. Please use the power and signal cables correctly when install or bend it.
3. In case of notice any abnormal smell or noise, please stop operation and call the nearest
dealer or service center.
V. Support timing chart:
Timing
Mode Reference Standard Resolution Pixel MHz FH KHz FV Hz Interlace H Polarity V Polarity
Mode 1 VESA 1024×768 65.000 48.363 60.004 NO - -
Mode 2 VESA 1024×768 75.000 56.476 70.069 NO - -
Mode 3 VESA 1024×768 75.011 57.524 72.000 NO
Mode 4 VESA 1024×768 78.750 60.023 75.029 NO

Version. 1.0 15
VI.Mechanical Dimension

Version. 1.0 16
VII. Product General Specification
Model Monitor Monitor with stand
Cabinet color Black
Display size 15.0"
Active Area 304 * 228 mm
Optimal Resolution 1024 * 768
Color Arrangement RGB-stripe
Brightness 250 cd/m² (typ)
Contrast Ratio 600:1
Response Time 8 ms (typ)
160 degrees (H)
Viewing Angle 160 degrees (V)
Input Video Format VGA/DVI
Input Video signal connector D-Sub 15 pins + DVI-D
Power consumption 20W
Horizontal : 31.5 kHz~60.2 kHz
Input Frequency Vertical : 56.3Hz~75Hz
Power supply DC 12V +/- 10%
Operating : 0℃~40℃
Temperature Storage : -10℃~50℃
Operating : 20%~80%
Humidity Storage : 10%~90%
Weight 3.5kg(net) 4.6kg(net)
Approvals CE, FCC
Wall Mount VESA 75 * 75 mm