i3-TECHNOLOGIES i3SYNC USB-C TX User manual

i3SYNC USB-C TX
USER MANUAL

Status Color LED Action
Standby Red Lights up constantly
Pairing Green Blink
Paired and Ready Green Lights up constantly
Mirroring Blue Lights up constantly
Error Red Blink
FW update White Blink
Description of functions
1HDMI OUT
Micro USB
Slide switch: overwrite on /off
Main button: for pairing with
transmitter
F1 button: for firmware update
Micro SD Card slot: for firmware
update
USB-C
F1 button: Hold down to
reboot the device.
Main button: pairing / start
mirroring / stop mirroring

How to install How to pair
How to use
2 3
4
Receiver
1 Connect a HDMI cable from a display to the HDMI OUT port of the Receiver.
2 Connect the micro USB cable for power supply.
3 The device will automatically start up after inserting the Power Supply.
Transmitter
1 Connect the USB-C cable into your laptop or other device.
1 Press the main button of the receiver and transmitter simultaneously.
2 Transmitter and receiver are blinking green during the pairing process.
3 When the pairing is succesful, the receiver and transmitter will
have a constant green light.
1 Connect the i3SYNC receiver to your display.
2 Connect the i3SYNC transmitter to your laptop.
3 Wait for a constant green light of the main button from the transmitter.
4 Press the main button to mirror, the main button will change into blue.

www.i3-technologies.com