IAdea XDS-2170 User manual

XDS-2170/2370
This printed quick guide provides a quick walkthrough of the set up process.
For complete documentation, please visit www.digisignage.com
Box Contents
Mounting and Installation
This smart signboard accepts a MIS-D100(100mm x 100mm) VESA-Compliant
mounting interface, the recommended screw is M4 x 9mm (excl. bracket
thickness)
Port connections
Quick Start Guide
A USB mouse is required to change system settings
USB mouse required
Main Unit
Power Cord
(with select power plug)

IAD_DGS_X21_10EP
System setup
1INSTALL the AC power cord
→Immediately, the Status LED on the main unit lights up
2You should see the player boot up screen as
shown in right
3WAIT while player boots up
→once you see “Basic settings” on screen,
the unit is ready for content update or menu
configuration
4PLUG IN a USB mouse to the unit’s USB port
5Enter the corresponding configuration option by moving the mouse
cursor over the configuration and click on the option to enter
→Using the USB mouse, click on “Wireless LAN”to enter Wireless
configuration and provide security information to connect to your
wireless access point
→find and set the correct time/date AND time zone.
IMPORTANT: time zone must be set correctly in the menu or via
management software for scheduled playback
→(OPTIONAL) Set a Password in the menus to prevent unauthorized
changes.
IMPORTANT: Password will be asked while enter the setup menu
during playback
6Click Set content button to configure your signage appliance to the
content service if needed

→For advanced player configuration, such as static IP, display
resolution, and firmware update, visit www.digisignage.com for more
information
Using control buttons
To unlock the control button, press and hold up and down buttons for
10 seconds, OSD unlocked notification will pop up on screen
Button function table:

IAD_DGS_X21_10EP
Content Management
Please consult the software documentation for information specific to your
management solution.
Troubleshooting
How do I interrupt playback and enter setup menu?
You can move your mouse cursor to the corner of the screen, press and hold
the left key for 10 seconds to exit playback and enter setup menu.
Some video play jumpy or incorrectly, How to get best video playback performance?
We provide video convert tool with pre-configured profile for user to encode
video to get best video playback performance.
Visit www.digisignage.com to download video convert tool.
Reset player to factory defaults
If modifying settings cause unintended results or if you have forgotten your
password, please reset the player. Local contents will also be removed.
1. Press and hold up button and then power on by connect power cord
to the unit
2. Keep holding up button until power led blinks
3. Release reset button and wait for system to
initialize to factory default state.