iBall 500-0506 User manual

Outdoors Insight, Inc.
www.iballhitchcam.com
CallToll Free 1-(877)-298-2055
1) Monitor
2) Select Up Down
3) Menu
4) Picture Rotate
5) Power
6) Fuse Cap
7) Camera
8) Adjustment Knobs
9) Power On Button
10) USB Charging
Port
11) USB Charging
Cable
Warranty Information: Your iBall Wireless Camera System comes with the
following warranty coverage:
• 30 Day Money Back Guarantee : If you are unsatised for any reason, send your
system back within 30 days of the original purchase date for a full refund (less
shipping).
• One Year Warranty: If your iBall Wireless Camera System fails due to a
manufacturing defect within one year of the original purchase date, we will
gladly repair or replace.
11
9
8
2
13
4
5
6
7
10

• Your iBall Wireless Trailer Hitch Camera is equipped with a rechargeable
lithium ion battery. Before rst use, charge the camera for 8 hours.
During periods of limited usage, charge the unit for 8 hours every 30
days to obtain peak battery performance. To charge, simply lift side
tab and insert supplied USB charger cable. Then connect the cable to
a USB Charger (not included). A solid red light will indicate the unit is
charging. A green light indicates the battery is fully charged.
• To Power on the Camera, press and hold for ve seconds. A red
light on the front of the camera will indicate the system is on. Place
the camera on any magnetic surface. Use the side adjustment knobs to
adjust the viewing angle.
• Plug the monitor into any 12v auxiliary port. Press the to turn on/
off the monitor. The monitor settings can be adjusted for brightness,
contrast and saturation by pressing the menu button. Use the ▲▼
arrows to adjust the desired settings. The camera orientation can be
adjusted by pressing the picture rotate button (#4).
SPECIFICATIONS:
Camera
5.8 GHz Wireless Frequency
Weather Resistant
Lithium Ion Rechargeable Battery
Magnetic Mounting
120° Field of View
Monitor
3.5” Color LCD Monitor
Weather Resistant
12v Auxiliary Power Supply
6” Adjustable Gooseneck
HOW TO USE Helpful tips:
• It is not recommended to leave the camera attached to your vehicle
while traveling at high speeds, as road vibration may cause the
magnetic bond to fail.
• While the camera is weather resistant, it is not recommended to
submerse for an extended period of time.
For additional technical support, please visit our website:
www.iballhitchcam.com or call us at (877)-298-2055
PROBLEM: CAUSE: SOLUTION:
Poor image quality/
static Cause 1: Distance between camera and
monitor too far
Cause 2: Environmental
interference
Cause 3: Low camera
battery, weak
12v monitor
connection
Solution 1: Move the camera
closer to the monitor
Solution 2: Move away from
buildings or objects
that may be affecting
wireless signal
Solution 3: Charge the camera
battery, check 12v
connection
Problem: Camera will
not turn on/off Cause 1: Power button not being held down
long enough
Cause 2: Low camera
battery
Solution 1: Firmly hold power
button for at least ve
seconds
Solution 2: Charge camera for
eight hours
Problem: Monitor will
not turn on Cause 1: 12v outlet is not supplying power
Cause 2: 12v connection is
not secure
Cause 3: Blown fuse in
monitor 12v power
plug
Solution 1: Try another 12v outlet
Solution 2: Firmly secure the
power plug into the
outlet
Solution 3: Replace the fuse
(3A 250v) by turning
the fuse cap (#6)
counterclockwise
Problem: Camera will
not stick to vehicle Cause 1: Non-ferrous surface Solution 1: Mount camera to iron surface, such as the
receiver hitch
P
O
W
E
R