IBASE Technology FWA-7108 User manual

FWA-7108
User Manual
2009 May V1.0

2
Copyright © 2008 IBASE Technology INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into
any language in any form or by any means, except documentation kept by the
purchaser for backup purposes, without the express written permission of IBASE
Technology INC. (“IBASE”).
Products and corporate names mentioned in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are used for
identification purposes only. All trademarks are the property of their respective
owners.
Every effort has been made to ensure that the contents of this manual are correct and
up to date. However, the manufacturer makes no guarantee regarding the accuracy of
its contents, and reserves the right to make changes without prior notice.

3
Table of Contents
Accessories ........................................................................................................... 6
Components.......................................................................................................... 7
Front View ................................................................................................................... 7
Specification ......................................................................................................... 9
Exploded view of the FWA-7108 assembly ............................................................10
Parts description ........................................................................................................ 11
Driver Installation ................................................................................................12
BIOS Setup ...........................................................................................................12

4
Safety Information
Your FWA-7108 is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important that
you read the following safety instructions.
Setting up your system
•Read and follow all instructions in the documentation before you operate your
system.
•Do not use this product near water.
•Set up the system on a stable surface or secure on wall with the provided rail. Do
not secure the system on any unstable plane or without the rail.
•Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.
•Slots and openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for ventilation.
Never insert objects of any kind into the ventilation openings.
•This system should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or
local power company.
•Use this product in environments with ambient temperatures between 0˚C and
45˚C.
•If you use an extension cord, make sure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere rating.
Care during use
•Do not walk on the power cord or allow anything to rest on it.
•Do not spill water or any other liquids on your system.
•When the system is turned off, a small amount of electrical current still flows.
Always unplug all power, and network cables from the power outlets before
cleaning the system.
•If you encounter the following technical problems with the product, unplug the
power cord and contact a qualified service technician or your retailer.
The power cord or plug is damaged.
Liquid has been spilled into the system.
The system does not function properly even if you follow the operating
instructions.

5
The system was dropped or the cabinet is damaged.
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
NO DISASSEMBLY
The warranty does not apply to the products that have been disassembled by users

6
Accessories
a. Power Cord x 1 b. M/B Manual x 1
c. Driver CD x 1 d. Rack Mount Bracket x 1
e. Rack Mount Screw x 6 f. Rubber Foot x 5

7
Components
Front View
Refer to the diagram below to identify the components on this side of the system.
RST
The reset switch allows reset the system.
PWR
The power LED illuminated when system been power on.
HDD
The hard disk LED blinks when data is being written into or read from the hard
disk drive.
NBP
Bypass feature indicator. Bright for bypass.
ID1 ~ ID5
There are user programmable indicators. Each indicator can be program to
specify status indicator. The detail programming method please refer M/B user
manual.
SWD
Reserved.

8
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as
keyboards, mouse devices, cameras, and hard disk drives. USB allows many
devices to run simultaneously on a single computer, with some peripheral acting
as additional plug-in sites or hubs.
Console
There is standard RS232 serial port present by RJ45 connector format. The detail
usage please refers to M/B user manual.
Eth0 ~ Eth7 (GbE)
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection
to a local network up to Giga-bit transfer rate.
Bypass
The bypass function is used to link/short two independent Ethernet ports which
indicated with “Bypass” text when user’s application software halt or when power
is off.

9
Specification
System Mainboard MB835
Construction Steel
Chassis Color Black
Storage 3.5” SATA HDD x 1 or 2.5” SATA HDD x 2(Optional)
Mounting Rack mount
Dimensions 429.4(W) x 44(H) x 376(D)mm / (16.9” x 1.7” x 14.8”)
Power Supply 180W Flex-ATX power supply
Operating Temperature 0°C ~ 45°C (32°F ~ 113°F) chamber air
Storage Temperature -20°C ~ 80°C
Relative Humidity 10~95% @45°C (non-condensing)
Vibration HDD: 0.25g/5~500Hz random operation
Shock HDD: 15g peak acceleration (11 msec duration)
RoHS Available
‧This specification is subject to change without prior notice.

10
Exploded view of the FWA-7108 assembly
23
24
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
20
21
22
18
19

11
Parts description
Part NO. Description Part NO. Description
1 Top Cover 2 Riser Card Bracket
3 MB835 4 3.5” SATA HDD
5 2.5” SATA HDD 6 2.5” HDD Bracket Left
7 MI810F 8 Door of LAN Module
9 Cosmetic Panel 10 ID835 LAN Module
11 Tray of LAN Module 12 Air Duct
13 System FAN 14 System FAN Bracket
15 2.5” HDD Bracket Right 16 Damper of 2.5” HDD
17 3.5” HDD Bracket 18 Damper of 3.5” HDD
19 Sponge 20 CF Card Block
21 Flex-ATX PSU 22 EMI Gasket
23 Rack Mount Bracket 24 Rubber Foot
25 Bottom Chassis

12
Driver Installation
Please refer correspond mainboard user manual to install the driver properly.
BIOS Setup
Please refer correspond mainboard user manual to configure BIOS setting.