© 2001-2018 iBEAM Systems, Inc. Specifications are current as 2/1/2018 and may change without no-
tice.
800.403.0688 www.ibeamsystems.com
iBEAM CONSTRUCTION CAMERAS
© 2001-2023 iBEAM Systems, Inc. Specifications are current as of 1/1/2023 and may change without notice.
Fixed 4K Premier
Installation Guide
90° horizontal viewing angle
Max 200’ of horizontal view for every 100' of
distance from the project
49° vertical viewing angle
Max 91’ of vertical view for every 100’ of
distance from the project
Approximate
Angle of View Estimator
Use this template on your site plan to
estimate the approximate view from
different locations.
TEST YOUR CAMERA’S NETWORK SETTINGS BEFORE INSTALLING THE CAMERA:
1. Connect the PoE Midspan to a power source near your network connection.
2. Connect the DATA IN port on the PoE Midspan to your network using the provided CAT5(e)
network cable.
3. Connect the camera’s network cable to the DATA POWER OUT port on the PoE Midspan.
4. Verify your network’s forwarding settings by trying to reach the camera at the Static WAN IP
address your IT department provided to iBEAM on the New Project Setup Form.
CONTACT YOUR IT DEPARTMENT FOR HELP IF YOU CANNOT REACH THE CAMERA
AS EXPECTED
AFTER YOU HAVE SUCCESSFULLY TESTED THE CAMERA’S NETWORK SETTINGS,
PROCEED WITH INSTALLATION:
1. Disconnect the camera’s network cable from the PoE Midspan.
2. Attach the camera to a pole or other mounting surface using the provided straps.
3. Reconnect the camera’s network cable to the DATA POWER OUT port on the PoE Midspan.
4. After the camera has been mounted and plugged in for 15-20 minutes, you will receive an
email* with information regarding how to view your camera.
*If you don't see this email from our Support Team, please reach out to them at 800.403.0688
ext. 2 and they can verify the system is online.
The Support Team is available Monday through Friday 8:00 am - 5:00 pm Mountain Standard
Time. When calling, if they’re assisting another customer please leave a voicemail and they’ll
return your call as soon as possible.
PoE Midspan
(for indoor use only)
(25’ CAT6a STP
network cable provided)
