IBM EtherJet ISA Adapter User manual

Note
Before using this information and the product it supports, be sure to read the
general information under “Notice” on page C-5.
First Edition (October 1995)
The following paragraph does not apply to the United Kingdom or any country where such
provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES
CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
states do not allow disclaimer of express or implied warranties in certain transactions, therefore,
this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new editions of
the publication. IBM may make improvements and/or changes in the product(s) and/or the
program(s) described in this publication at any time.
It is possible that this publication may contain reference to, or information about, IBM products
(machines and programs), programming, or services that are not announced in your country. Such
references or information must not be construed to mean that IBM intends to announce such IBM
products, programming, or services in your country.
Requests for technical information about IBM products should be made to your IBM Authorized
Dealer or your IBM Marketing Representative.
A form for readers’ comments appears at the back of this publication. If the form has been
removed, address your comments to:
Department CCF
Design & Information Development
IBM Corporation
P.O. Box 12195
RESEARCH TRIANGLE PARK, NC 27709-9990
USA
When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the
information in any way it believes appropriate without incurring any obligation to you.
 Copyright International Business Machines Corporation 1995. All rights
reserved.
Note to U.S. Government Users — Documentation related to restricted rights — Use,
duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule
Contract with IBM Corp.
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Contents
About This Manual .......................... vii
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Related Publications . . . . . . . . . . . . . . . . . . . . . . . xiii
Chapter 1. Introduction . . . . . . . . . . . . . . . . . . . . . . 1-1
Chapter 2. Preparation and Installation Checklist ...... 2-1
Chapter 3. Package Contents . . . . . . . . . . . . . . . . . . 3-1
Cabling Requirements . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Hardware Requirements for the Adapter ............. 3-4
Software Requirements for the Adapter .............. 3-4
Hardware Requirements for IBM LAN Client MPS ........ 3-5
Software Requirements for IBM LAN Client MPS ........ 3-5
Chapter 4. Installing the Adapter ................ 4-1
Chapter 5. Configuring the Adapter with LANAID ...... 5-1
The MAC Address ......................... 5-1
Starting the LANAID Program ................... 5-2
LANAIDC Command Line Program ................ 5-5
Finding the Adapter Serial Number ................ 5-7
Determining Plug and Play Status ................. 5-7
Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Chapter 6. Installing the Device Drivers for Your Network
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Installation Instruction Table .................... 6-1
NetWare 3.11 Server LAN Driver Installation ......... 6-3
NetWare 3.12 Server LAN Driver Installation ......... 6-7
NetWare 4.x Server LAN Driver Installation ......... 6-11
NetWare DOS Requester Driver Installation ......... 6-15
OS/2 NDIS2 MAC Driver Installation Using LAPS or MPTS 6-17
NDIS2 and NDIS3 MAC Driver Installation for Windows for
Workgroups 3.11 . . . . . . . . . . . . . . . . . . . . . . . . 6-20
NDIS3 MAC Driver Installation for Windows NT ...... 6-22
 Copyright IBM Corp. 1995 iii
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

NDIS3 MAC Driver Installation for Windows 95 ....... 6-23
LAN Manager (DOS or OS/2) NDIS2 MAC Driver Installation 6-25
NDIS 2.01 for Artisoft LANtastic ................ 6-26
Installing NDIS2 MAC Drivers Using Other Installation
Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-27
Manually Installing the ODI Client Driver for DOS ..... 6-28
Manually Installing the ODI Client Driver for OS/2 ..... 6-30
Manually Installing NDIS Drivers ............... 6-32
Chapter 7. IBM LAN Client MPS ................. 7-1
About IBM LAN Client MPS ..................... 7-1
IBM LAN Client MPS Features ................... 7-2
Installation of IBM LAN Client MPS Using LANAID 2.0 ..... 7-3
NetBIOS Device Driver Parameters ................ 7-5
Appendix A. Testing and Troubleshooting .......... A-1
The LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Testing the Adapter ......................... A-1
EtherJet ISA Adapter Diagnostics ................ A-1
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
IBM EtherJet ISA Adapter Support ................. A-2
IBM Bulletin Board System ..................... A-2
Appendix B. Installation Return Codes ............ B-1
ODI Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Installation Problems? . . . . . . . . . . . . . . . . . . . . . . . . B-5
Appendix C. Product Warranty and Notices ......... C-1
Product Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5
Notice to Users in the United Kingdom .............. C-5
Electronic Emission Notices ..................... C-5
European Community (EC) Mark of Conformity Statement . C-7
Japanese Voluntary Control Council for Interference (VCCI)
Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-7
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8
List of Abbreviations ......................... X-1
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-3
iv EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Figures
3-1. EtherJet ISA Adapter and BNC T Connector ...... 3-1
3-2. EtherJet 10BASE-T ISA Adapter ............ 3-2
3-3. Diskettes and Safety Booklet .............. 3-2
3-4. 10BASE-T Cable . . . . . . . . . . . . . . . . . . . . . . 3-3
3-5. 10BASE2 Cable . . . . . . . . . . . . . . . . . . . . . . 3-3
3-6. AUI Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
4-1. 10BASET Connection . . . . . . . . . . . . . . . . . . . 4-2
4-2. AUI Connection . . . . . . . . . . . . . . . . . . . . . . 4-2
4-3. Connecting the T connector for 10BASE2 ....... 4-3
4-4. Connecting the 10BASE2 Cable and Terminator ... 4-3
5-1. MAC Address Label .................... 5-2
Tables
6-1. Driver Installation Instructions Index ........... 6-2
6-2. LAN Driver Parameters .................. 6-5
6-3. LAN Driver Parameters .................. 6-9
6-4. LAN Driver Parameters ................. 6-13
6-5. Configurable IBMEINWC Client Driver Parameters . 6-31
6-6. Keyword Parameters for the Adapter PROTOCOL.INI
File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-33
Figures v
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

vi EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

About This Manual
This manual describes installation and configuration of EtherJet ISA
Ethernet adapters, installation of device drivers, and testing and
troubleshooting the adapter.
This manual also contains information about the IBM LAN Client
MPS and its installation.
 Copyright IBM Corp. 1995 vii
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

viii EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Safety Information
Danger: Before you begin to install this product, read the
safety information in Caution: Safety Information—Read This First ,
SD21-0030-02. This booklet describes safe procedures for cabling
and plugging in electrical equipment.
Varning — livsfara: Innan du börjar installera den här
produkten bör du läsa säkerhetsinformationen i dokumentet Varning:
Säkerhetsföreskrifter— Läs detta först, SD21-0030-02. Där beskrivs
hur du på ett säkert sätt ansluter elektrisk utrustning.
Fare: Før du begynner å installere dette produktet, må du
lese sikkerhetsinformasjonen i Advarsel: Sikkerhetsinformasjon —
Les dette først , SD21-0030-02 som beskriver sikkerhetsrutinene for
kabling og tilkobling av elektrisk utstyr.
Fare! Før du installerer dette produkt, skal du læse
sikkerhedsforskrifterne i NB: Sikkerhedsforskrifter—Læs dette først
SD21-0030-02. Vejledningen beskriver den fremgangsmåde, du skal
bruge ved tilslutning af kabler og udstyr.
Gevaar: Voordat u begint met de installatie van dit produkt,
moet u eerst de veiligheidsinstructies lezen in de brochure PAS OP!
Veiligheidsinstructies—Lees dit eerst, SD21-0030-02. Hierin wordt
beschreven hoe u electrische apparatuur op een veilige manier moet
bekabelen en aansluiten.
Gevaar Voordat u begint met het installeren van dit produkt,
dient u eerst de veiligheidsrichtlijnen te lezen die zijn vermeld in de
publikatie Caution: Safety Information - Read This First ,
SD21-0030-02. In dit boekje vindt u veilige procedures voor het
aansluiten van elektrische appratuur.
 Copyright IBM Corp. 1995 ix
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Vorsicht: Bevor mit der Installation des Produktes begonnen
wird, die Sicherheitshinweise in Achtung:
Sicherheitsinformationen—Bitte zuerst lesen, IBM Form
SD21-0030-02. Diese Veröffentlichung beschreibt die
Sicherheitsvorkehrungen für das Verkabeln und Anschließen
elektrischer Geräte.
Danger : Avant d'installer le présent produit, consultez le livret
Attention : Informations pour la sécurité — Lisez-moi d'abord ,
SD21-0030-02, qui décrit les procédures à respecter pour effectuer
les opérations de câblage et brancher les équipements électriques
en toute sécurité.
Danger: Avant de procéder à l'installation de ce produit, lisez
d'abord les consignes de sécurité dans la brochure ATTENTION:
Consignes de sécurité—A lire au préalable, SD21-0030-02. Cette
brochure décrit les procédures pour câbler et connecter les appareils
électriques en toute sécurité.
Pericolo: prima di iniziare l'installazione di questo prodotto,
leggere le informazioni relative alla sicurezza riportate nell'opuscolo
Attenzione: Informazioni di sicurezza — Prime informazioni da
leggere in cui sono descritte le procedure per il cablaggio ed il
collegamento di apparecchiature elettriche.
xEtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Perigo: Antes de iniciar a instalação deste produto, leia as
informações de segurança Cuidado: Informações de Segurança —
Leia Primeiro , SD21-0030-02. Este documento descreve como
efectuar, de um modo seguro, as ligações eléctricas dos
equipamentos.
Peligro: Antes de empezar a instalar este producto, lea la
información de seguridad en Atención: Información de Seguridad —
Lea Esto Primero, SD21-0030-02. Este documento describe los
procedimientos de seguridad para cablear y enchufar equipos
eléctricos.
Perigo: Antes de começar a instalar este produto, leia as
informações de segurança contidas em Cuidado: Informações Sobre
Segurança—Leia Isto Primeiro, SD21-0030-02. Esse folheto
descreve procedimentos de segurança para a instalação de cabos e
conexões em equipamentos elétricos.
VAARA: Ennen kuin aloitat tämän tuotteen asennuksen, lue
julkaisussa Varoitus: Turvaohjeet—Lue tämä ensin , SD21-0030-02,
olevat turvaohjeet. Tässä kirjasessa on ohjeet siitä, miten
sähkölaitteet kaapeloidaan ja kytketään turvallisesti.
Safety Information xi
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Vigyázat: Mielôtt megkezdi a berendezés üzembe helyezését,
olvassa el a “Caution: Safety Information— Read This First,
SD21-0030-02 könyvecskében leírt biztonsági információkat. Ez a
könyv leírja, milyen biztonsági intézkedéseket kell megtenni az
elektromos berendezés huzalozásakor illetve csatlakoztatásakor.
xii EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Related Publications
IBM LAN Technical Reference IEEE 802.2 and NETBIOS API,
SC30-3587
IBM Transmission Control Protocol/Internet Protocol Version 2.1
for DOS: Programmer’s Reference, SC31-7046
Novell NetWare DOS Requester
Novell Workstation for DOS and MS Windows
Microsoft LAN Manager Installation and Configuration Guide
IBM LAN Server Command and Utilities, S10H-9686
Guide to LAN Server Books, S10H-9688
DOS LAN Services and User's Guide, S10H-9684
Safety Information xiii
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

xiv EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Chapter 1. Introduction
The IBM EtherJet ISA Adapter and IBM EtherJet 10BASE-T ISA
Adapter are ISA Ethernet adapters that allow you to attach IBM
Personal Computer systems, or IBM-compatible ISA computers to an
Ethernet network.
Adapter operating speed is 10 Mbps.
Cabling
– EtherJet 10BASE-T ISA Adapters use 10BASE-T cabling
– EtherJet ISA Adapters can use 10BASE-T, 10BASE2, or AUI
cabling
Full-duplex technology
Enabled for Plug and Play
Included with this adapter are:
LAN Adapter Installation and Diagnostic (LANAID), which
simplifies installation and setup of the adapter. See Chapter 5,
“Configuring the Adapter with LANAID”
IBM LAN Client Multiple Protocol Support for DOS and Windows
which significantly reduces DOS memory consumption in many
environments. See Chapter 7, “IBM LAN Client MPS”
A \READ.ME directory on the Device Drivers diskette that
provides you with the latest information about your adapter. Be
sure to read the information provided there.
 Copyright IBM Corp. 1995 1-1
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

1-2 EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Chapter 2. Preparation and Installation
Checklist
Perform the following steps to prepare and install your new EtherJet
ISA Adapter.
1Before beginning installation, be sure to check the
README files on the Device Driver diskette. These are
text files that can be viewed with any PC editor.
2Verify that you have the items listed under Chapter 3,
“Package Contents.”
3Verify that you have the correct cables listed under
“Cabling Requirements” on page 3-3.
4Verify that your computer hardware and software meets
the requirements listed under “Hardware Requirements
for the Adapter” on page 3-4 and “Software
Requirements for the Adapter” on page 3-4.
5Install the EtherJet ISA Adapter, following instructions
under Chapter 4, “Installing the Adapter.”
6Configure the EtherJet ISA Adapter, following instructions
under Chapter 5, “Configuring the Adapter with LANAID.”
Note: Step 6 is not necessary for computers that are
enabled for Plug and Play.
7Install the device drivers, following instructions under
Chapter 6, “Installing the Device Drivers for Your
Network Environment.”
For future reference, store these instructions with the instruction
manual supplied with your computer.
 Copyright IBM Corp. 1995 2-1
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

2-2 EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Chapter 3. Package Contents
The adapter kit consists of :
An EtherJet ISA Adapter or an EtherJet 10BASE-T ISA Adapter
A BNC T-type connector, shipped with the EtherJet ISA Adapter
only
Figure 3-1. EtherJet ISA Adapter and BNC T Connector
 Copyright IBM Corp. 1995 3-1
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Address
08005A
000001
Figure 3-2. EtherJet 10BASE-T ISA Adapter
Four diskettes and a Safety Information booklet
Safety Booklet
Figure 3-3. Diskettes and Safety Booklet
– Disk 1: Device Drivers
– Disk 2: LANAID
– Two IBM LAN Client MPS diskettes
If any item is missing or damaged, contact your place of purchase.
3-2 EtherJet ISA Adapters Installation and User Guide
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com

Cabling Requirements
In order to connect the Ethernet adapter to your network, you will
need one of the following cables (not supplied with this kit).
A Category 3, 4, or 5 cable with RJ-45 connectors, for use with
twisted-pair (10BASE-T) cabling in your Ethernet network.
10BASE-T
Figure 3-4. 10BASE-T Cable
The maximum length of twisted-pair cable is 100 meters (328
feet).
An RG-58, standard, coaxial cable (10BASE2) with bayonet
connectors (BNCs), terminators, and a BNC T-type connector.
The T connector is shipped with your EtherJet ISA Adapter kit.
10BASE2
Figure 3-5. 10BASE2 Cable
The maximum length of thin coaxial cable is 185 meters (607
feet).
A shielded, twisted-pair drop cable with AUI connectors, if your
Ethernet network uses external transceivers.
Chapter 3. Package Contents 3-3
Title: ANW0CNTL CreationDate: 09/29/95 12:51:21
All manuals and user guides at all-guides.com