IBM iL2120 User manual
iL2120 IBM Value Data/Video Projector, iL2220 Conference
Room Data/Video Projector
User’s Guide
iL2120 IBM Value Data/Video Projector, iL2220 Conference
Room Data/Video Projector
User’s Guide
Note: Before using this information and the product it supports, read the information “Appendix F.
Product warranties and notices” on page 49.
First Edition (October 2000)
© Copyright International Business Machines Corporation 2000. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Contents
Safety information ..........v
About this book ..........vii
Installation and user’s guide ......1
Appendix A. Specifications and
accessories............35
Appendix B. Portable and mobile computer
activation ............37
Appendix C. Using video mirroring . . . 43
Appendix D. Projected image size ....45
Appendix E. Help and service information 47
Appendix F. Product warranties and
notices .............49
© Copyright IBM Corp. 2000 iii
iv iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide
Safety information
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety
Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
© Copyright IBM Corp. 2000 v
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette
produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
P
red inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.
Antes de instalar este producto lea la información de seguridad.
Lässäkerhetsinformationen innan du installerar den här produkten.
vi iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide
About this book
This manual contains instructions for setting up, using, maintenance and
troubleshooting of the iL2120 IBM
®
Value Data/Video Projector and the iL2220
IBM Conference Room Data/Video Projector. The manual is divided into two
parts:
Part 1: Setup guide
This guide contains the product description and expanded installation
instructions.
Part 2: Appendixes
The appendixes contain product specifications, accessories, and help and
service. It also contains the product warranties and notices.
Note: The illustrations in this manual might be slightly different from your
hardware.
Registering your option
Thank you for purchasing OPTIONS by IBM. Please take a few moments to
register your product and provide us with information that will help IBM to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing
better ways to communicate with you. Register your option on the IBM Web
site at
http://www.ibm.com/pc/register
IBM will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive
further information.
© Copyright IBM Corp. 2000 vii
viii iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide
Installation and user’s guide
Introduction
The IBM iL2120 and iL2220 multimedia projectors are specifically designed for
multipurpose use. They generate crisp, clear images using Digital Light
Processing
™
(DLP) technology, and feature an M1-DA connector for easy,
built-in digital/analog and USB connectivity. They are easy to connect, easy to
use, easy to transport, and easy to maintain. The iL2120 has native SVGA 800
x 600 resolution, the iL2220 has XGA 1024 x 768 resolution. The user-interfaces
of the two products are identical; information in this user’s guide applies to
both products.
The projector is compatible with these major broadcast video standards:
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. It automatically
adjusts to optimize its performance for the incoming video.
Image resolution
iL2120
The SVGA resolution of the iL2120 projected image is 800 x 600. The projector
cannot compress screen resolutions above 1024 x 768. If your computer screen
resolution is higher than 1024 x 768, reset it to a lower resolution before you
connect the projector.
Note: The iL2120 projector automatically expands 640 x 480 images to 800 x
600. You can display these images at their native resolutions by turning
off the Auto Resize feature. See “Resize”on page 21 for more
information.
iL2220
The XGA resolution of the iL2220 projected image is 1024 x 768. The projector
cannot compress screen resolutions above 1024 x 768. If your computer screen
resolution is higher than 1024 x 768, reset it to a lower resolution before you
connect the projector.
Note: The iL2220 automatically expands 640 x 480 and 800 x 600 images to
1024 x 768. You can display these images at their native resolutions by
turning off the Auto Resize feature. See “Resize”on page 21 for more
information.
© Copyright IBM Corp. 2000 1
Compatibility
The projector is compatible with a wide variety of computers and video
devices, including:
vIBM-compatible computers, including mobile computers, up to 1024 x 768
resolution.
vApple Macintosh and PowerBook computers up to 1024 x 768 resolution.
vMost standard VCRs, DVD players, High Definition Television (HDTV)
sources, camcorders, and laser disc players.
Note: The projector is compatible with 1080i and 720P HDTV format.
Unpacking the projector
The projector comes with the items that are shown in the illustration. Check
to make sure that all are included. Contact your dealer if anything is missing.
If you are experienced in setting up presentation systems, use the Quick Start
card that comes with the projector. For complete details on connecting and
operating the projector, refer to the User’s Guide.
Attention: This product contains a Metal Arc Lamp which contains Mercury.
Dispose of it as required by local ordinances and regulations.
Note: The contents of your shipping box may vary depending on the
projector configuration you’ve ordered.
2iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide
1Projector and lens cap 4Composite video cable 7MI-DA analog computer cable
2Soft carrying case 5Audio cable 8Power cord
3User’s Guide,Quick Start card
and multi-language online User’s
Guide CD (available after
12/31/00)
6Audio cable adapter 9Remote control
1Zoom ring 4Security lock 7Power cord connector
2Keypad 5Connector panel 8Focus ring
3Speaker 6Power button
Usage guidelines
Observe the following guidelines when using the projector.
Attention: Do no look directly into the projection lens when the lamp is
turned on. The bright light might harm your eyes.
Attention: Do not block the grills on the projector. Restricting the airflow
can cause it to overheat and turn off. If this happens, you must wait a minute
before attempting to turn it back on.
vHandle the projector as you would any product with glass components. Be
especially careful not to drop it.
Installation and user’s guide 3
vAvoid leaving the projector in direct sunlight or extreme cold for extended
periods of time. If this happens, allow it to reach room temperature before
use.
vTransport the projector in a carrying case. See Appendix A for information
on ordering accessories for your projector.
Setting up the projector
Use the following procedure to set up the projector:
1. Place the projector on a flat surface.
vThe projector must be within 10 feet (3 m) of your power source and
within 6 feet (1.8 m) of the computer.
vIf you want to project from behind a translucent screen, set up the
projector behind your screen. See “Rear Projection”on page 23 for
instructions for reversing the image.
vIf you are installing the projector on the ceiling, refer to the installation
guide that comes with the Ceiling Mount Kit for more information. To
turn the image upside down, see “Ceiling Projection”on page 23. The
Ceiling Mount is sold separately. See “Accessories”on page 36.
2. Position the projector the desired distance from the screen.
vThe distance from the lens of the projector to the screen and the zoom
setting determine the size of the projected image. The following
illustration shows three projected image sizes. For more information
about image size, see Appendix D.
3. Make sure that the projector is unplugged and your computer is turned
off.
4iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide
Note: If you are connecting the projector to a computer, make sure that the
distance between the computer and the projector is six feet or less.
Connect the cables to the corresponding control panel by matching the
icons. Reference the following two illustrations.
1composite video 3Audio in 5Cable Wizard data interface
2S-video 4MI-DA data interface
Note: The Cable Wizard connector is used with the optional CableWizard, a
connection hub containing mouse, audio, monitor and computer
connectors. It is optimized for ceiling-mounted installations.
1To USB mouse 2To computer video 3To projector
Installation and user’s guide 5
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
— Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
— Connect all power cords to a properly wired and grounded electrical outlet.
— Connect to properly wired outlets any equipment that will be attached to this product.
— When possible, use one hand only to connect or disconnect signal cables.
— Never turn on any equipment when there is evidence of fire, water, or structural damage.
— Disconnect the attached power cords, telecommunications systems, networks, and modems before
you open the device covers, unless instructed otherwise in the installation and configuration
procedures.
— Connect and disconnect cables as described in the following table when installing, moving, or
opening covers on this product or attached devices.
To connect: To disconnect:
1. Turn everything OFF. 1. Turn everything OFF.
2. First attach all cables to devices. 2. First, remove power cords from outlet.
3. Attach signal cables to connectors. 3. Remove signal cables from connectors.
4. Attach power cords to outlet. 4. Remove all cables from devices.
5. Turn device ON.
Connecting a computer
The projector comes with an M1-DA analog computer cable. If your computer
has a digital output, you can use the optional M1-DA digital computer cable,
sold separately at http://www.infocus.com/.
1. Plug the end of the M1-DA analog computer cable marked A into the
connector marked AD on the projector.
2. Plug the blue monitor end of the M1-DA analog computer cable into the
video connector on your computer.
6iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide
1Audio cable 2MI-DA analog computer cable 3USB mouse
Note: Many mobile computers do not automatically turn on their external
video port when a secondary display device such as a projector is
connected. See your computer manual for the command that activates
the external video port. Press Fn F7 on your IBM ThinkPad to activate
the external display. Activation commands for some mobile computers
are listed Appendix B.
Note: If you are connecting the projector to an older Macintosh computer that
does not have a 15-pin connector, you must use a Mac adapter between
the computer and the projector. See “Accessories”on page 36.
To control the computer mouse from the projector remote control or keypad,
plug the USB end of the M1-DA analog computer cable into the mouse
connector on your computer. If your computer has a PS/2 mouse connector
and not a USB mouse connector, you can purchase the optional Cable Wizard3
which has a PS/2 mouse connector or the Executive Remote IR Receiver. See
“Accessories”on page 36.
Note: The USB mouse is supported for use only with Microsoft
®
Windows
®
98, Microsoft Windows 2000 Professional, and Apple OS 8.5 and later.
To play the audio from your computer audio on the projector, plug either end
of the audio cable into the audio connector on your computer. Plug the other
end of the audio cable into the speaker connector on the projector.
Note: You do not need to restart your computer after connecting a USB
mouse to use it (it is hot-pluggable).
Installation and user’s guide 7
For information about starting the projector and computer, go to “Starting up
the projector and adjusting the image”on page 10.
Connecting a video player
Use the following procedure to connect a video player.
If your video player uses a round, one-prong composite video connector,
you’ll need only the audio cable, audio adapter, and composite video cable
that comes with the projector. If your video player uses a round, four-prong
S-video connector, you’ll need an S-video cable in addition to the audio cable
and audio adapter. See “Accessories”on page 36.
1. Plug the yellow connector of the composite video cable into the
“video-out”connector on your video player. This connector might be
labeled “To Monitor.”Or, if you are using an S-video cable, connect it to
the “S-video out”connector on the video player. Refer to the following
two illustrations.
2. Plug the other yellow connector into the composite video connector on the
projector. Or, if you are using S-video, plug the other end of the cable into
the “S-video”connector on the projector.
Note: HDTV sources must be connected to the projector using the M1-DA
computer cable (not a composite or S-video cable). See the previous
pages for details on connecting this cable.
1Composite video cable 2Audio cable 3Audio adapter
8iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide
1S-video cable 2Audio cable 3Audio adapter
3. Plug the white connector of the audio adapter’s into the left “audio out”
connector on your video player. Plug the red connector of the adapter into
the right “audio out”connector on the video player.
4. Plug the other end of the audio adapter into the audio cable.
5. Plug the audio cable into the “audio in”connector on the projector.
Note: The audio adapter is provided so that the same audio cable that is used
to connect a computer can be used with the adapter to connect a VCR.
Note: Your video player might also have a “Video Out”connector for a
coaxial cable connection. Do not use this to connect to the projector.
Installation and user’s guide 9
DANGER
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
—Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
—Connect all power cords to a properly wired and grounded electrical outlet.
—Connect to properly wired outlets any equipment that will be attached to this product.
—When possible, use one hand only to connect or disconnect signal cables.
—Never turn on any equipment when there is evidence of fire, water, or structural damage.
—Disconnect the attached power cords, telecommunications systems, networks, and modems and
modems before you open the device covers, unless instructed otherwise in the installation and
configuration procedures.
—Connect and disconnect cables as described in the following table when installing, moving, or
opening covers on this product or attached devices.
To connect: To disconnect:
1. Turn everything OFF. 1. Turn everything OFF.
2. First attach all cables to devices. 2. First, remove power cords from outlet.
3. Attach signal cables to connectors. 3. Remove signal cables from connectors.
4. Attach power cords to outlet. 4. Remove all cables from devices.
5. Turn device ON.
Starting up the projector and adjusting the image
Use the following procedure to start the projector and adjust the image.
Note: Always use the power cord that comes with the projector.
1. Remove the lens cap.
2. Plug the power cord into the side of the projector, then plug it into your
electrical outlet. A surge-protected power strip is recommended.
Note: The first time you connect your computer to the projector, the
computer might display a message stating that new hardware was
found. The Add New Hardware Wizard window might open. Use
the wizard to install the correct device driver (the computer
considers the projector a Plug and Play monitor).
3. Turn on the lamp by pressing the lamp on/off button on the keypad.
10 iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide
This manual suits for next models
1
Table of contents
Other IBM Projector manuals
