ICI TDL 300 User manual
Guide
2105 W. Cardinal Dr. Beaumont, TX 77705
Phone: (409) 861-0788
Toll Free: (866) 861-0788
infraredcameras.com
suppor[email protected]
We Are IR ™
ICI cameras fall under US Federal Law and Export Control.
TDL 300
QUICK START GUIDE
Edit Text Outlines
IndustryIndustry
2
©Copyright 2022, Infrared Cameras, Inc. - All rights reserved. The
contents of this document may not be reproduced in whole or in parts
without the written consent of the copyright owner.
Printed in the United States of America.
2105 W. Cardinal Dr.
Beaumont, TX 77705
(866) 861-0788
www.infraredcameras.com
THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE
SPECIFICATIONS OF THE PRODUCT WITHOUT PRIOR NOTIFICATION. THE
MANUFACTURER ALLOWS HIMSELF THE RIGHT TO MODIFY WITHOUT
ANY PRELIMINARY OPINION THE TECHNICAL SPECIFICATIONS OF THE
PRODUCT. THIS MANUAL MAY CONTAIN TECHNICAL INACCURACIES OR
TYPOGRAPHICAL ERRORS.
NOTICE ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN
THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER
WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE
PROVIDED “AS IS” WITH ALL FAULTS. ICI DISCLAIMS ALL WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE,
OR TRADE PRACTICE.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE
ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION
PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED
HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE
SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR ICI
REPRESENTATIVE FOR A COPY.
IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING
OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
3
Package Includes
I-Cam Device
Power Adapter
ENSURE ALL SYSTEM EQUIPMENT AND COMPONENT ITEMS ARE
PRESENT BEFORE BEGINNING INSTALLATION
Charging Cable
4
The camera is used as a
handheld device.
Set Up
A. B.
Power on device.
TURN ON THE DEVICE BY PRESSING AND HOLDING THE POWER
BUTTON UNTIL YOU FEEL THE VIBRATION; THEN, RELEASE THE
POWER BUTTON.
TO POWER OFF THE DEVICE, FIRST DOUBLE-CLICK THE POWER
BUTTON TO ENTER STANDBY MODE; THEN, PRESS AND HOLD
THE POWER BUTTON FOR 3 SECONDS.
5
Charging Instructions
A.
Align the metal prongs of the
charging cable with the bottom of
the device; then, touch the cable
to the device. Magnets will hold
the charging cable in place.
CHARGE THE BATTERY FOR A MINIMUM OF 3 HOURS BEFORE
USING THE DEVICE.
IF THE CHARGING CABLE DOES NOT ATTACH TO THE DEVICE
EASILY THE MAGNETS ARE NOT ALIGNED PROPERLY. INVERT THE
MAGNET ALIGNMENT AND TRY AGAIN.
B.
Plug the USB end of the
charging cable into the bottom
of the power adapter.
6
ENSURE THE IMAGER IS NEAR ROOM TEMPERATURE BEFORE
CHARGING THE DEVICE. DO NOT CHARGE IN EXTREMELY HOT OR
COLD AREAS. THE BATTERY CAPACITY MAY BE DECREASED IF
CHARGED IN AN EXTREME TEMPERATURE ENVIRONMENT.
IF YOU DO NOT USE THE IMAGER FOR A LONG PERIOD OF TIME,
PUT THE DEVICE IN A COOL AND DRY ENVIRONMENT. THE
BATTERY WILL DISCHARGE OVER TIME; THEREFORE,THE IMAGER
SHOULD BE CHARGED OCCASIONALLY TO PREVENT DAMAGE TO
THE BATTERY OR THE DEVICE.
C.
Plug power adapter into a
110/120V electrical outlet.
7
Laser Sight
AFTER POWERING ON THE DEVICE, MAKE SURE TO ADJUST THE
LASER SIGHT TO MATCH TO THE AIMING LASER.
WHEN THE DETECTOR IS NOT IN USE, MAKE SURE THE LASER
SIGHT IS ALSO TURNED OFF TO EXTEND THE BATTERY LIFE.
TO PREVENT EYE DAMAGE AND PERSONAL INJURY, DO NOT
LOOK DIRECTLY INTO THE LASER. DO NOT POINT THE LASER
DIRECTLY AT PEOPLE OR ANIMALS OR INDIRECTLY OFF
REFLECTIVE SURFACES.
A. B.
C.
Power on the laser sight by
pressing the + button on the
side of the device.
Power off the laser sight by
pressing the unlabeled button
on the side of the device.
After powering on the device, use a
standard flat head screwdriver (not
included) to make adjustments to the
adjustment screws on the upper and
right sides of the sight to keep it in
alignment with the aiming laser.
8
ENSURE BATTERY COVER IS PROPERLY CLOSED. IMPROPER
CLOSURE OF BATTERY COVER MAY EXPOSE THE BATTERY AND
INTERNAL ELECTRONICS TO ELEMENTAL DAMAGE.
MAKE SURE THE DEVICE IS ON A FLAT STABLE SURFACE WHEN
REMOVING OR REPLACING THE BATTERY.
DO NOT FORCE THE BATTERY INTO THE BATTERY BAY. IF USER
FEELS SIGNIFICANT RESISTANCE REMOVE THE BATTERY AND
ENSURE IT IS PROPERLY ALIGNED BEFORE TRYING TO PLACE
BATTERY INTO THE BATTERY BAY.
Laser Sight Battery Replacement
B.
C.
A.
D.
Use a hex key (included) to
remove the two battery bay bolts.
Use a hex key (included) to
replace the two battery bay bolts.
Remove battery from battery bay.
Place a brand new, unused
battery in the battery bay.
9
Infrared Cameras, Inc.
2105 W. Cardinal Dr.
Beaumont, TX 77705
Phone: Toll Free: International:
Website: www.infraredcameras.com
ICI manufactures complete systems and software. We can provide complete
engineering, software, and OEM solutions. Our Fortune 500 clients rely on us
for infrared equipment and thermography training (which we offer through the
Infrared Training Institute).
In addition to providing custom germanium, silica, and sapphire optics, we also
build windows for enclosures, as well as custom pan and tilt units. We can even
provide customizable explosion-proof systems.
Our knowledge and experience stems from years of using infrared imaging
and temperature measurement instruments to provide solutions to: managers,
engineers, scientists, inspectors and operators in space, power companies,
medical, pulp and paper, food industry, research and development, and various
process industries. You can see our products and services used in industrial,
commercial, and government applications worldwide. Originally named Texas
Thank you for your dedicated and continued support.
About ICI / Contact
Other manuals for TDL 300
1
Table of contents
Other ICI Security Sensor manuals
