ICL LHC 5886 User manual

LHC 5886 / 5887
LHC 5886 / 5887
Installation & removal
guide
Copyright 2015 © ICL Tech Ltd. ALL RIGHTS RESERVED

495
172
265 54
105
YOU HAVE
NCR 5886 / 5887 LHC Panel: used on NCR 5886 /
Personas / 86 /P86 & NCR 5887 / Personas 87 / P87
ATM with lowered height collar setup

YOU’LL NEED
Small
Flathead Screwdriver

your ATM
environment

install

LOCATE THE “u”section AT THE
TOP EDGE OF PANEl
1.

Insert the top of Panel into
WINDOW, one corner at a time
2.

Check that the top EDGE of
the panel is sitting flush to
the window
3.

Insert side of panel by pulling
the bottom edge of panel
outward and pushing side of
panel into the window
4.

Repeat step 4 with the other
side of the panel
5.

6. Press firmly along the
bottom edge until the panel
clicks into place

removal

1. Wedge flathead screwdriver
between bottom corner of
panel and window

2. Drag the wedged
screwdriver along the
bottom edge of panel

3. once the bottom edge of panel
is separated pull the panel
downward to remove

thank you
Further questions regarding installation and
removal of ICL ATM Design™
Window Panels, or any other enquiry can be
forwared to [email protected]
Or please visit us on the web at:
www.atmdesign.co.uk/contact.html