iCONNECT TVL-RH User manual

INSTALLATION INSTRUCTIONS
Thank you for buying iConnect products.
The TVL-RH is the latest technology in fold down ceiling Tv lifts.
Please read this manual carefully before assembling.
Fold Down Ceiling Tv Lift
TVL-RH

2
Contents
MAIN
CONTENTS
SAFETY
OVERVIEW
REMOTE CONTROL
POWER SUPPLY
LIFT INSTALLATION
FINISH
1.
2.
3.
4.
5.
6.
7-12.
13-15.
iConnect

Fold down ceiling Tv lift TVL-RH must be installed by specialized personnel only.
Before installing the Fold down ceiling Tv lift, please read the following instructions carefully
1. The Fold down ceiling Tv lift must be used indoors only.
2. Never connect more than one lift motor to the same switch.
3. In case of maintenance, unplug the power supply.
4. Incorrect use, including exceeding the maximum lifting weight, would be dangerous and invalidate
the warranty.
5. The manufacture do not take responsibility for any damage to property or personal injury, if the lift
is used outside of recommended specifications.
6. Incorrect servicing could lead to risk of electric shock.
7. For any repairing, please directly contact the dealer you purchased the unit from.
8. Check at least once a year that the screws of the steel cables are well tightened.
3
Safety iConnect

iConnectOverview
4
4 Holes For Hanging Each Side
Lift Frame
Wiring Cover
Service Button
Hidden Service Cover
Screen Adapters
Power Supply
Remote Control
Lift Door
Green MDF wood for finish

Remote Control iConnect
Battery
27A 12V
Close Open
Stop Lern
5

Power Supply iConnect
6
110/220V is selected by switch
Before power on please check
input voltage avoiding damage
LNE
+V -V

Lift Installation iConnect
Mark 8 to 6 holes in the ceiling.
Drill the marked holes in the ceiling, diameter 10-12mm and install the lift to the
desired height.
Make sure the lift is level and flush
7

iConnect
Connect the power supply to a power source 110v or 220v.
Connect the main cable that runs from the opening to the power supply as described.
Make sure that the power supply is easy accessible.
Click the Open button on the remote control one time, and wait until the lift door
open.
Open
Lift Installation
8
110VAC
Or
220VAC

iConnect
Loosen the screws of the cable cover
Lift Installation
9
Cable cover

iConnectLift Installation
Move the wiring for the screen according to the description.
Close the cable cover.
10

The Red line represents the wiring for the TV screen
The Green line represents the wiring for 24V DC and dry contact command
11
Dry Contact
Red -Up
Yellow -Down
White -Stop
Black -Com
Lift Installation iConnect

Lift Installation
12
Install the TV screen display adapters onto the TV.
Connect the wiring to the screen.
Mount the screen on the brackets.
Lift Installation iConnect

iConnectLift Installation
13
Adjust the MDF wooden frame flush to the ceiling.

iConnectLift Installation
14
Polisher connections and paint the ceiling.

iConnectLift Installation
15
Enjoy your product