ICP DAS USA I-8213W-4G User manual

I-8213W-4G Quick Start, E-mail: ser[email protected]
1
Version 1.0 March 2017
Product Content
In addition to this Quick Start, this product also includes these accessories:
Technical Support
I-8213W-4G User Manual and USB Driver
http://ftp.icpdas.com/pub/cd/usbcd/napdos/gprs_gsm_modem/i-8213w-
4g
1
Configuring the boot mode
Before starting at the first time, be
sure that the switch is placed in
the “0” position.
I-8213W-4G Quick Start
I-8213W-4GE
GSM/GPRS Antenna
(ANT-421-04)
GPS Antenna
(ANT-115-03)
USB Cable
(CA-USB18)
Software
Utility
CD

I-8213W-4G Quick Start, E-mail: ser[email protected]
2
2
Install SIM Card and Antenna
Step1: Press the button to pull out the SIM card
Step 2: Place the SIM card into the slot
Step 3: Connect the GSM / GPRS antenna
Step 4: Connect the GPS antenna
Step 5: Connect the USB cable to the PAC
3
Install on XP-8000
Step 1: Install the module hardware on the XP-8000
Step 2: Switch to ”2”, Close EWF
Step 3: Reboot XP-8000
Step 4: After Reboot, Install USB Driver(I-8213W-4G USB driver
V1.00.exe)
Step 5: Finish the USB Driver Installation, please check the USB
Com Port
Step 6: Switch to “0”, Open EWF

I-8213W-4G Quick Start, E-mail: ser[email protected]
3
4
Quick Test
Step 1: Start →All Programs →Accessories →
Communications →Hyper Terminal →Input new
connection name →Click “OK” →Select USB Interface
“I-8213W-4G AT command Port”→Click “OK”
Step 2: File →Properties →Settings →Click “ASCII Setup…”
→Select “Echo typed character locally” →“OK”
Step 3: Input “AT” and press “Enter”, then you will receive “AT
OK”

I-8213W-4G Quick Start, E-mail: ser[email protected]
4
5
Technical Support
If you have any questions about I-8213W-4G, please contact us
Email: [e-mail]
I-8213W-4G Product Website:
http://m2m.icpdas.com/i-8213w-4g_TC.html