ICP DAS USA ISO-C64 User manual

- 1 -
Language English
Version V1.3
Update Feb.2009
………………………………………………
What’s on your package?
¾One ISO-C64 series card
¾One companion ISA CD (V2.1 or later)
¾One Quick Start Guide(This document)
………………………………………………
Installing Windows Driver
Follow those steps:
1. Setup the Windows driver. You can get the driver from:
CD:\NAPDOS\ISA\ISO\DLL\
http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/iso/dll/
2. Click “Next >” button to start installation.
3. Click “Next >” button to install driver into the default folder.
4. Click “Install” button to continue installation.
5. Select “NO, I will restart my computer later” and click “Finish”.
1
2
I
SO
-
C
6
4
Windows driver only support windows 98/NT/2000 and
XP/2003/vista 32-bit versions.

- 2 -
………………………………………………
I/O Base Address
¾The base address is set from SW1 DIP switch on
board:
………………………………………………
Installing Hardware on PC
Follow those steps:
1. Shut down and power off your computer
2. Remove all covers from the computer
3. Select an empty ISA slot
4. Carefully insert your I/O card into the ISA slot
5. Replace the PC covers
6. Power on the computer
After powering-on the computer, continue next process.
3
4
ON
1 2 3 4 5 6
SW1: Base Address * Default Base Address: 0x200
Address 1 2 3 4 5 6
*0X200 ON ON ON ON ON ON
0X208 ON ON ON ON ON OFF
0x210 ON ON ON ON OFF ON
0x218 ON ON ON ON OFF OFF
0x220 ON ON ON OFF ON ON
: : : : : : :
0x300 OFF ON ON ON ON ON
0x308 OFF ON ON ON ON OFF
0x310 OFF ON ON ON OFF ON
: : : : : : :

- 3 -
………………………………………………
Adding Hardware
7. Add Hardware
7-1 Open the “Control Panel” by click the item “Start / Settings / Control
Panel”.
7-2 Double-click the item “Add/Remove Hardware” and click “Next >” button.
7-3 Select the item “Add/Troubleshoot a device” and click“Next >” button.
7-4 Select the item “Add a new device” and click “Next >” button.
7-5 Select the item “No, I want to select the hardware from a list” and click
“Next >” button.
7-6 Select the item “Other device” and click “Next >” button.
7-7 Click the “Have Disk…” button.
7-8 Click the “Browse…” button to select the Inf file default path is
C:\DAQPRO\ISO_Win2K\Inf and clicks the “OK” button.
7-9 Select the correct device from the “Models:” listbox and Click “Next >”
button.
7-10 The windows show to dialog box and Click the “OK” button to enter the
device’s properties settings.
8. Modify the device properties
8-1 Enter the “ICPDAS ISO-P64/ISO-C64 Digital I/O Card Properties”.
8-2 Click the “ I/O Range ” and click the “Change setting” button to enter the
“Edit Input/Output Range”.
8-3 Set the I/O Range value for SW1 value. (Default 200 Hex)
8-4 Check the Conflict information for “ No devices are conflicting” and click
“OK”.
9. Reboot the PC
The detail “add hardware” information. Please refer to :
CD:\NAPDOS\ISA\Manual\PCI_ISA_PnP_Driver_Installation_in_Win9x_2K_XP.pdf
5
Adding hardware is used on Windows 2000/XP/2003/Vista
32 only. Windows 9X/Me/NT users can skip it.

- 4 -
………………………………………………
Pin Assignments Setting
The detail pin assignments information. Please refer to :
CD:\NAPDOS\ISA\ISO\Manual\ISO-P32C32_P32S32W_P64_C64_manual.pdf
http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/iso/manual/iso-p32c32_p32s32w_p64_c64_manual.pdf
6
CON1: Pin assignment
CON2: Pin assignment CON2: Pin assignment
20
22
21
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1
2
3
4
5
15
14
13
12
11
10
9
8
7
6
19
18
17
16
DO 10
DO 13
DO 12
DO 11
DO 14
DO 15
DO 0
DO 6
DO 5
DO 4
DO 3
DO 2
DO 1
DO 7
DO 8
DO 9
DO: 0-15 (+)
DO: 0-15 (-)
DO 16
DO 17
DO 18
DO 19
DO 20
DO 21
DO 22
DO 23
DO 24
DO 25
DO 26
DO 27
DO 28
DO 29
DO 30
DO 31
DO: 16-31 (+)
DO: 16-31 (-)
N.C.
External
Power GND (-) External
Power GND (-)
External
Power (+)
External
Power (+)
2
6
4
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
1
19
29
27
25
23
21
37
35
33
31
3
5
7
9
17
15
13
11
39 40
38
DO 32
DO 38
DO 37
DO 36
DO 35
DO 34
DO 33
DO 39
DO 40
DO 41
DO 47
DO 46
DO 45
DO 44
DO 43
DO 42
DO 57
DO 63
DO 62
DO 61
DO 60
DO 59
DO 58
CON2 D/O External
Power (+)
DO 48
DO 54
DO 53
DO 52
DO 51
DO 50
DO 49
DO 55
DO 56
N.C.
N.C.
CON2 D/O External
Power GND (-)
CON2 D/O External
Power GND (-)
CON2 D/I Power (+)
CON2 D/I Power (-) N.C.
20
22
21
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1
2
3
4
5
15
14
13
12
11
10
9
8
7
6
19
18
17
16
DO 42
DO 45
DO 44
DO 43
DO 46
DO 47
DO 32
DO 38
DO 37
DO 36
DO 35
DO 34
DO 33
DO 39
DO 40
DO 41
DO: 32-47 (+)
DO: 32-47(-)
DO 48
DO 49
DO 50
DO 51
DO 52
DO 53
DO 54
DO 55
DO 56
DO 57
DO 58
DO 59
DO 60
DO 61
DO 62
DO 63
DO: 48-63 (+)
DO: 48-63(-)
N.C.
External
Power GND (-) External
Power GND (-)
External
Power (+)
External
Power (+)
DB-40-Pin conversion
DB-37-Pin
Extension cable:
CA-4037W

- 5 -
¾Wiring Note:
※Recommend: It is necessary to connect a diode in the output
end as means of preventing damage from the counter emf. If
your External Device is inductive Load, Ex. Relay…
To prevent the board damaged forever by overload, the
GND pins (CON1: pin 1/20, CON2: pin 1/ 20) all must be
connected with GND of External Power.

- 6 -
………………………………………………
Self-Test
1. Prepare for device:
¾DN-37(Optional) wiring terminal board.
¾Exterior power supply device. For example: DP-665(Optional)
2. Use DN-37 to connect the board CON1.
3. External +24 V connect to CON1.DO:0-15(+) and external
GND connect to CON1.DO:0-15(-).
(External +24 V connect to Pin18, External GND connect to Pin1)
4.Use output LED to connect the CON1.DO1 and DO:0-15(+).
(Output LED to connect the CON1.Pin3 and CON1.Pin18)
7
DN-37 I/O Wiring
12 34 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
+24
V
GND
GND
+5 V
Exterior
CON1
CON2

- 7 -
5. Run the ISO-C64 sample program.
Get the file from(Default): C:\DAQPro\ISO_WinXXX\Demo\
6. Check number of the ISO-C64, and test DO function.
7. Get DO function test result.
Complete
1. The one
ISO-C64 had
successfully
installed to PC.
2. Select the
board number
for the ISO-C64.
It starts from 0.
3. Click this
button to do
DO test.
4. Write &hAA to all
channels [0-15] of output.
5. Check
channels [0-15]
of output LED
state for high.

- 8 -
………………………………………………
Additional Information
9ISO-C64 Series Card Product page:
http://www.icpdas.com/products/DAQ/pc_based/iso_c64.htm
9DN-37(Optional) page:
http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm
9DP-665(Optional) page:
http://www.icpdas.com/products/Accessories/power_supply/dp-665.htm
9Documents:
CD:\NAPDOS\ISA\ISO\manual
http://ftp.icpdas.com/pub/cd/iocard/isa/napdos/isa/iso/manual/
9Software:
CD:\NAPDOS\ISA\ISO
http://www.icpdas.com/download/isa/iso/index.htm
The ICP DAS Web Site
http://www.icpdas.com
Contact Us
[email protected]
Copyright ©2008 by ICP DAS Co., Ltd. All right are reserved
8
Technical support
Supplies and ordering information
Ways to enhance your device
FAQ
Application story