ICP DAS USA ET-7000 series User manual

ET-7067 Modbus TCP DAQ Module - QuickStart (Dec/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
ET-7067
Modbus TCP based Remote Data Acquisition I/O Module
Quick Start Guide
PET-7000/ET-7000 Software
Plastic Rail Quick Start
Module
Utility CD
PET-7000 / ET-7000 User Manual
CD:\NAPDOS\ET7000_ET7200\Document\ http://ftp.icpdas.com/pub/c
d/6000cd/napdos/et7000_et7200/document/
ET-7067 Website
https://www.icpdas-usa.com/et_7067

ET-7067 Modbus TCP DAQ Module - QuickStart (Dec/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
1
Factory Default Settings
Network
Default
Authentication
Default
Connection
IP Address:
192.168.255.1
User name:
Admin
Subnet Mask:
255.255.0.0
Password:
Admin
Gateway:
192.168.0.1
1

ET-7067 Modbus TCP DAQ Module - QuickStart (Dec/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
1: Install eSearch from
http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/
2. Launch eSearch and click on the “Search Server” button
3. Double-click the name for your module on the list
4. Enter the network configuration and click “OK”
5. Repeat Step 2. to search the module again
To make sure your modifications take effect.

ET-7067 Modbus TCP DAQ Module - QuickStart (Dec/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4
1: Set the IP configuration on your computer.
The ET-7000 module comes with the default IP address of
192.168.255.1, you must chose an IP address for the
computer in the range of 192.168.255.2 – 192.168.255.253
that is not in use.
2: Launch your web browser to go to the ET-7000 web
interface.
Enter the factory default IP address 192.168.255.1
for the ET-7000 as the URL in browser and press
Enter.
3 3: Fill out the User name and Password:
Fill out the factory default user name and password “Admin” and
then click “OK”.

ET-7067 Modbus TCP DAQ Module - QuickStart (Dec/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
4: Assign a valid IP address for your ET-7000 module
 Click “Configuration”
 Click “Network Settings” in the sub-menu
 Enter a valid IP address for your ET-7000 module.
 Click the “SUBMIT” button.



5: Restore the original IP address to your computer
4Logging in to the ET-7000 Module
1. Enter the new IP for the ET-7000 as the URL in browser
2. Fill out the User name and Password “Admin” again
3. Welcome to ET-7000 web site.