ICP DAS USA NS-205G User manual

NS-205G User’s Manual (Version 1.1, Nov/2008) --------------- 1
NS-205G
5-Port Industrial 10/100/1000 Mbps Ethernet Switch
Introduction:
The NS-205G is 5-port unmanaged gigabit switches that support 10/100/1000
Base-T, with a 10/100/1000M auto-negotiation feature and auto MDI/MDIX
function. It can connect 5 workstations and automatically switches the
transmission speed (10 Mbps or 100 Mbps or 1000Mbps) for corresponding
connections.
That is an ideal solution for bandwidth-hungry applications (such as high
resolution digital image transmission, video/audio file streaming/downloading,
and server farm connectivity).
The flow control mechanism is also negotiated. There is link/data rate LEDs for
each port to aid trouble-shooting. Port connectors are shielded RJ-45
Features:
•Power saving Technology
•Automatic MDI / MDI-X crossover for plug-and-play
•Each port supports both 10/100 and 1000 Mbps speed auto negotiation
•Store-and-forward architecture
•Full duplex IEEE 802.3x and half duplex backpressure flow control
•10 Gbps high performance memory bandwidth.
•Supports operating temperatures from –40 ~ +75 ℃
•DIN-Rail
Specifications:
Technology
Standards IEEE 802.3, 802.3u, 802.3ab and 802.3x
Processing Type Store & forward, wire speed switching
MAC Addresses 8K
Memory Bandwidth 10 Gbps
Frame buffer memory 1 Mbit
Jumbo Frames 9K for Speed 1000M
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ45 ports 10/100/1000 Base-T auto negotiation speed, F/H duplex mode,
and auto MDI/MDIX connection
LED Indicators Power, 10/100/1000M, Link/Act.
Ethernet Isolation 1500 Vrms 1 minute
Frame Ground for EMS Protection Yes
Power
Input Voltage Range +10 ~ +30VDC (Non-isolation)
Power consumption 0.2A@24VDC, +/- 5% arrowed with 1000M Full duplex
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Connection 3-Pin Removable Terminal Block
Mechanical
Case Plastic
Flammability UL 94V-0
Dimensions 33mm x 107mm x 78mm (W x H x D)
Installation DIN rail mount
Environmental
Operating Temperature -40 ~ +75°C
Storage Temperature -40 ~ +85°C
Ambient Relative Humidity 10% to 90% non-condensing

NS-205G User’s Manual (Version 1.1, Nov/2008) --------------- 2
Dimensions: LED functions:
Pin Function For Terminal Block:
External power supply is connected using the removable terminal block:
+Vs : Power input (+10 ~ +30V) and should be connected to the power supply (+)
GND : Ground and should be connected to the power supply (-)
F.G. : F.G. stands for Frame Ground (protective ground). It is optional. If you use this
pin, it can reduce EMI radiation; improve EMI performance and ESD protection.
Checking Power:
Since the NS-205G consumes 4.8W max, ensure that your power supply is able to meet
this demand. The Input voltage range is +10~ +30VDC.
Power Savings by Number of Connected Ports and Link Status:
Computers do not require Internet access all the time; neither do switches utilize all ports
at all times. When a computer or network equipment is shutdown, switches often remain
on and continue to consume considerable amount of power. With Power saving
technology, NS-205G can automatically detect link status and reduce power usage of
ports that are idle. Computers or any connecting parties set to standby mode (not power
off), however, will not provide significant power savings.
Power Savings by Cable Length:
The powers saving switches have the ability to analyze the length of any Ethernet cable
connected to them for adjustment of power usage accordingly. Shorter lengths require less
power.
LED Color Description
Red On Power is On
Power Red Off Power is Off
Orange On
Green On Link to 1000 Mbps
Only Orange On Link to 100 Mbps
Ethernet
Port
Only Green On Link to 10 Mbps
An automatic power savings when a specific
port is in link down or standby operation. An intelligent algorithm that actively determines the appropriate power level needed based on cable length
up 60% up 10%