ICP DAS USA P8R8-DIO User manual

P8R8-DIO
P16R16-DIO
User Manual Version 1.7
Oct. 2011
Warranty
All products manufactured by ICP DAS are warranted against defective materials
for a period of one year from the date of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for damages consequent to the use of this product.
ICP DAS reserves the right to change this manual at any time without notice. The
information furnished by ICP DAS is believed to be accurate and reliable.
However, no responsibility is assumed by ICP DAS for its use, nor for any
infringements of patents or other rights of third parties resulting from its use.
Copyright
Copyright © 2011 by ICP DAS. All rights are reserved.
Trademark
Names are used for identification only and may be registered trademarks of their
respective companies.
P8R8-DIO/P16R16-DIO User Manual (Ver.1.7, Oct. 2011, IMH-009-17) 1

Tables of Contents
1. INTRODUCTION............................................................................................................................... 4
1.1 FEATURES AND APPLICATIONS................................................................................................ 4
1.1.1 Features .................................................................................................................................. 4
1.1.2 Applications....................................................................................................................... 4
1.2 PRODUCT CHECK LIST............................................................................................................. 5
1.3 P8R8-DIO SPECIFICATIONS .................................................................................................... 6
2. P8R8-DIO INSTALLATION ............................................................................................................ 7
2.1 UNPACKING............................................................................................................................. 7
2.2 P8R8-DIO LAYOUT ................................................................................................................ 8
2.3 SW1 AND JUMPER SETTING..................................................................................................... 8
2.3.1 Base Address Setting.......................................................................................................... 8
2.3.2 Jumper Setting................................................................................................................. 11
2.4 PIN ASSIGNMENTS................................................................................................................. 12
3. P8R8-DIO PROGRAMMING ........................................................................................................13
3.1 I/O ADDRESS MAP ................................................................................................................ 13
3.2 RELAY OUTPUT..................................................................................................................... 14
3.2.1 Output Register..................................................................................................................... 14
3.2.2 Using Relay Output ......................................................................................................... 15
3.3 ISOLATED INPUT.................................................................................................................... 16
3.3.1 Input Register ..................................................................................................................16
3.3.2 Using Isolated Input............................................................................................................ 17
4. P16R16-DIO SPECIFICATIONS...................................................................................................18
5. P16R16-DIO INSTALLATION ...................................................................................................... 19
5.1 UNPACKING........................................................................................................................... 19
5.2 P16R16-DIO LAYOUT .......................................................................................................... 20
5.3 SW1 AND JUMPER SETTING................................................................................................... 20
5.3.1 Base Address Setting........................................................................................................ 20
5.3.2 Jumper Setting................................................................................................................. 24
5.4 PIN ASSIGNMENTS................................................................................................................. 26
6. P16R16-DIO PROGRAMMING .................................................................................................... 28
6.1 I/O ADDRESS MAP ................................................................................................................ 28
6.2 RELAY OUTPUT..................................................................................................................... 29
P8R8-DIO/P16R16-DIO User Manual (Ver.1.7, Oct. 2011, IMH-009-17) 2

6.2.1 Output Register................................................................................................................ 29
6.2.2 Using Relay Output............................................................................................................. 30
6.3 ISOLATED INPUT.................................................................................................................... 31
6.3.1 Input Register ..................................................................................................................31
6.3.2 Using Isolated Input............................................................................................................ 32
7. TROUBLESHOOTING................................................................................................................... 33
7.1 PROBLEM ISOLATED.............................................................................................................. 33
8. SOFTWARE/HARDWARE INSTALLATION....................................................................... 34
8.1 SOFTWARE INSTALLING PROCEDURE ........................................................................................... 34
8.2 HARDWARE INSTALLING PROCEDURE.......................................................................................... 35
P8R8-DIO/P16R16-DIO User Manual (Ver.1.7, Oct. 2011, IMH-009-17) 3

1. Introduction1. Introduction
The P8R8-DIO/P16R16-DIO is an 8/16 isolated input and 8/16 relay output
interface board designed for control and sensing applications. This interface
board is easily installed in any PC/AT/XT or compatible computer. The
P8R8-DIO/P16R16-DIO provides 8/16 electromechanical relay outputs and
8/16 optically isolated inputs. The P8R8-DIO/P16R16-DIO can be used in
various applications including load switching, external switching, contact closure,
etc.
The P8R8-DIO/P16R16-DIO is an 8/16 isolated input and 8/16 relay output
interface board designed for control and sensing applications. This interface
board is easily installed in any PC/AT/XT or compatible computer. The
P8R8-DIO/P16R16-DIO provides 8/16 electromechanical relay outputs and
8/16 optically isolated inputs. The P8R8-DIO/P16R16-DIO can be used in
various applications including load switching, external switching, contact closure,
etc.
1.1 Features and Applications1.1 Features and Applications
1.1.1 Features
8 relay outputs channels for P8R8-DIO
8 optically isolated inputs channels for P8R8-DIO
16 relay outputs channels for P16R16-DIO
16 optically isolated inputs channels for P16R16-DIO
LED indicator for each relay output state
AC/DC Signals Input
AC Signal Input With Filter
1.1.2 Applications
Factory Automation
Laboratory Automation
Security Control
Product Test
P8R8-DIO/P16R16-DIO User Manual (Ver.1.7, Oct. 2011, IMH-009-17) 4

1.2 Product Check List
The shipping package includes the following items:
One P8R8-DIO or P16R16-DIO series card
One software utility ISA CD.
One Quick Start Guide.
It is recommended that you read the Quick Start Guide first. All the
necessary and essential information is given in the Quick Start Guide, including:
Where to get the software driver, demo programs and other resources.
How to install the software.
How to test the card.
Attention!
If any of these items is missing or damaged, contact the dealer from whom
you purchased the product. Please save the shipping materials and carton in
case you need to ship or store the product in the future.
P8R8-DIO/P16R16-DIO User Manual (Ver.1.7, Oct. 2011, IMH-009-17) 5