ICPDAS TPD-433F-H User manual

TPD-433F-H 4.3'' TouchPAD - QuickStart (Oct/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 1
TPD-433F-H
4.3'' Touch Screen HMI Controller
Quick Start Guide
Product Website:
https://www.icpdas-usa.com/tpd_433f_h
1 Shipping package
Thanks for buying ICPDAS TPD-433F-H device. This shipping package contains the following items:
TPD-433F-H Quick Start (This Document)
2 Appearance

TPD-433F-H 4.3'' TouchPAD - QuickStart (Oct/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 2
3 Pin Assignment
On the back of the TouchPAD:
The pin assignments:
Pin
Description
F.G.
Frame Ground. F.G. is connected to the inside EMI or ESD suppression circuits.
Make sure that F.G. is connected to the Earth
VDC
DC input Voltage (range: +12 V ~ +48 V)
GND
Connected to the power supply’s ground pin
D2+
The positive data line of the RS-485 network
D2-
The negative data line of the RS-485 network
TxD2
The pin of transmitted data of the RS-232
RxD2
The pin of received data of the RS-232
The definition of the rotary switch:
No
Mode
Description
Run &
This is a special run mode which is used in the development
0
Update
stage. The TouchPAD device can be updated by a PC from the
(Ethernet)
remote side through Ethernet.
Ethernet
While the application run on the TouchPAD device seriously
1
Force
crashes, use this mode to update a new application to the
Update
TouchPAD device through Ethernet.
2
Run Only
This mode is used for running programs.
USB Force
While the application run on the TouchPAD device seriously
9
Update
crashes, use this mode to update a new application to the
TouchPAD device through USB.

TPD-433F-H 4.3'' TouchPAD - QuickStart (Oct/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 3
4 First Use of the TPD-433F-H

TPD-433F-H 4.3'' TouchPAD - QuickStart (Oct/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 4
5 Creating First Project
To create your first project of the TPD-433F-H, install the free development tool, HMIWorks
and then refer to <<TouchPAD_getting_started.pdf>>, which can be found on the
FTP: ftp://ftp.icpdas.com/pub/cd/touchpad/document/english/getting_started
6 Hardware Installation
TPD-433F-H with External Wall Box,
TPD-433F-H with Outlet Box,
EWB-T43F (optional)
OB140F (optional)