ICT GP83 User manual

COUPON
PRINTER
COUPON
PRINTER
GP83GP83

Contents
1. General Information.............................................................................3
1-1. Specifications................................................................................3
1-2. Dimensions...................................................................................4
2. Installation............................................................................................7
2-1. Printer Device Interconnection......................................................7
2-1-1. Power Supply Connector................................................... 7
2-1-2. RS232 Communication Connector.................................... 7
2-1-3. USB Communication Connector.........................................7
2-1-4. RS232/USB Mode Selection...............................................8
2-1-5. Near End of Paper Sensor..................................................8
2-2. Bezel.............................................................................................9
2-3. Printer Installation.......................................................................10
2-4. Large Paper Roll Fixed Mount Installation..................................11
2-5. Paper Loading............................................................................12
3. Operation...........................................................................................13
3-1. Ticket Content Design................................................................13
3-2. About Printer Show.....................................................................13
3-2-1. Text Printing Format.........................................................13
3-2-2. Operating Control Codes..................................................17
3-3. I/O Circuits.................................................................................19
4. Maintenance.......................................................................................20
5. Troubleshooting..................................................................................21
5-1. Graphic Displacement.................................................................21
5-2. Text Displacement......................................................................23
5-3. Opto Sensor Inspecting Disable.................................................29
6. Parts and Assembly Views.................................................................30
6-1. Circuit Board Overview...............................................................30

Use of Materials Limitations
International Currency Technologies Corporation (ICT) all rights reserved.
All materials contained are the copyrighted property of ICT.
All trademarks, service marks, and trade names are proprietary to ICT.
ICT reserves the right at all times to disclose or to modify any information as
ICT deems necessary to satisfy any applicable law, regulation, legal process
or governmental request, or to edit, refuse to post or to remove any information
or materials, in whole or in part, in ICT's sole discretion.

3www.ictgroup.com.tw
Chapter 1
1. Installation :
1-1. Specifications :
Common
Electrical
Electrical
Thermal Dot-line Printing
Up to 80 mm/s
RS232, USB
578
8 dots/mm
3 Internal Fonts
0.125 mm
0.125 mm
50g or more
80g or more
KF50-HDA or Equivalent
21.6 ~ 26.4V DC
See page.4
938 g
Small Paper Roll- Basis Weight : 60 pounds, 80 pounds
Outside Diameter : 72 mm
Inside Diameter : 12.5 ± 0.5 mm
Width : 79 ± 0.5 mm
Large Paper Roll- Basis Weight : 60 pounds, 80 pounds
Outside Diameter : 220 mm
Inside Diameter : 12.5 ± 0.5 mm
Width : 79 ± 0.5 mm
*The length of paper for printing should be longer than 6 cm.
Standby : 1 W
Operation: 26 W
Maximum: 72 W
Operating- Temperature: 0ºC ~ +50ºC
Humidity: 20%-85%RH (No Condensation)
Storage - Temperature: -25ºC ~ +70ºC
Humidity: 10%-90%RH (No Condensation)
Print Method
Print Speed
Interface
Total Dots
Dot Density
Character Set
Heat Element
Paper Feed Pitch
Paper Feed Tension
Paper Hold Tension
Recommended Paper
Voltage Range
Outline Dimension
Net Weight
Paper Roll Dimension
Power Consumption
Operation Environment

Unit:mm[inch]
1-2. Dimensions :
Chapter 1
4
www.ictgroup.com.tw
82.0 [3.23]
100.0 [3.94]
138.0 [5.43]
92.2 [3.63]
95.0 [3.74]
120.0 [4.72]
26.8 [1.06]
66.0 [2.60]
124.0 [4.88]
145.0 [5.71]
124.0 [4.88]
145.0 [5.71]
157.0 [6.18]
60.5 [2.39]
92.2 [3.63]
101.3 [3.99]
Figure 1

5www.ictgroup.com.tw
A
Large paper roller A & B can be setup by adjusting large paper roll fixed mount.
Unit:mm{inch}
Chapter 1
Figure 2
80.0 [3.15]
150.0 [5.91]
150.0 [5.91]
106.0 [4.17]
82.0 [3.23]
147.0 [5.79]
150.0 [5.91]
28.0 [1.10]
220.0 [8.66]
183.1 [7.21]
293.1 [11.54]
188.4 [7.42]
298.4 [11.75]

6
www.ictgroup.com.tw
Chapter 1
B
Unit:mm{inch}
Figure 3
80.0 [3.15]
150.0 [5.91]
150.0 [5.91]
106.0 [4.17]
82.0 [3.23]
147.0 [5.79]
150.0 [5.91]
28.0 [1.10]
21 . [ .32
1 5 8 ]
32 .5[12 65]
1.
220.0[8.66]
155.9[6.13]
60 42 5.9[1 . 6]

2. Installation :
2-1. Printer Device Interconnection
2-1-1. Power Supply Connector
2-1-2. RS232 Communication Connector
2-1-3. USB Communication Connector
Connector CN9
Power supply (Vbat) is 24V±10%
IMPORTANT NOTE:
Wires AWG26 must be used in order to avoid current losses.
PIN NUMBER
PIN NUMBER
PIN NUMBER
Connector CN7
GND
Transmit data (TxD, printer output)
Receive data (RxD, printer input)
CTS/DSR (printer input)
RTS/DTR (printer output)
Connector CN1
VBus
D-
D+
N.C
GND
SIGNAL NAME
SIGNAL NAME
SIGNAL NAME
1
1
1
GND
2
2
2
GND
3
3
3
GND
4
4
4
GND
5
5
5
GND
6 Vbat
7 Vbat
8 Vbat
9 NC
Chapter 2
7www.ictgroup.com.tw
Table 1
Table 2
Table 3

8
PIN NUMBER
LED
OPTO
GND
SIGNAL NAME
1
2
3
2-1-4. RS232/ USB Mode Selection
2-1-5. Near End of Paper Sensor
RS232 or USB mode will be chosen via software automatically after
the first character is received. At power-up, both RS232 and USB
communications are active. If the first character is received on the
RS232 port, the communication will be RS232, and vice versa for USB.
This first character will be interpreted like any other incoming byte into
the printer.
Connector CN12
Chapter 2
Table 4
www.ictgroup.com.tw