Icy Box IB-CAM502-HD User manual
Manual IB-CAM502-HD
Full HD webcam with Remote Control
Handbuch IB-CAM502-HD
Full-HD Webcam mit Fernbedienung
Safety information IB-CAM502-HD
Please read carefully the following information to prevent injuries, damage to material
and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate information in terms
of the probability of occurrence as well as the type and severity of the consequences if the measures to
prevent hazards are not complied with.
Warns of a directly hazardous situation causing death or serious
injury.
Warns of a potentially hazardous situation that may cause death
or serious injury.
Warns of a potentially hazardous situation that may cause
minor injury.
Warns of a potential situation that may cause material or environ-
mental damage and disrupt operative processes.
1. Risk of electrical shock Contact with parts conducting electricity
Risk of death by electrical shock
• Read the operating instructions prior to use
• Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels
• Avoid contact with conducting parts
• Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments only
• Operate the device using a power unit meeting the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapour and dust
• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs
DANGER
WARNING
CAUTION
IMPORTANT
WARNING
2. Hazards during assembly (if intended)
Sharp components
Potential injuries to fingers or hands during assembly (if intended)
• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only
3.Hazards caused by a development of heat
Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
• Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit
4. Hazards caused by very small parts and packaging
Risk of suffocation
Risk of death by suffocation or swallowing
• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children
5. Potential data loss Data loss during commissioning
Potentially irreversible data loss
• Always comply with the information in the operating instructions/quick installation guide
• Use the product only wonce the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product
CAUTION
IMPORTANT
WARNING
IMPORTANT
Safety information IB-CAM502-HD
6. Cleaning the device Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or short
circuit in the device
• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth
7. Disposing of the device Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components, recycling
circle interrupted
This icon on product and packaging indicates that this product must
not be disposed of as part of domestic waste. In compliance with the Waste Electrical
and Electronic Equipment Directive (WEEE) this electrical device and potentially inclu-
ded batteries must not be disposed of in conventional, domestic waste or recycling
waste. If you would like to dispose of this product and potentially included batteries,
please return it to the retailer or your local waste disposal and recycling point.
The included batteries must be completely discharged before return.
Take precaution to protect the batteries from short circuits (e.g. by insulating the contact
poles with adhesive tape)
If you have any questions, please do not hesitate to contact our support at
IMPORTANT
IMPORTANT
Safety information IB-CAM502-HD
Sicherheitshinweise IB-CAM502-HD
Zur Vermeidung körperlicher Schäden, sowie von Sach-, Geräteschäden und Datenver-
lust beachten Sie bitte folgende Hinweise:
Warnstufen
Signalwort und Sicherheitszeichen kennzeichnen die Warnstufe und geben einen sofortigen Hinweis auf
Wahrscheinlichkeit, Art und Schwere der Folgen, wenn die Maßnahmen zur Vermeidung der Gefahr
nicht befolgt werden.
warnt vor einer unmittelbar gefährlichen Situation, die zum Tod
oder zu schweren Verletzungen führen wird.
warnt vor einer möglicherweise gefährlichen Situation, die zum
Tod oder zu schweren Verletzungen führen kann.
warnt vor einer möglicherweise gefährlichen Situation, die zu
leichten Verletzungen führen kann.
warnt vor einer möglichen Situation, die zu Sach- und Umwelt-
schäden führen und den Betriebsablauf stören kann.
1. Gefahren durch elektrische Spannung
Kontakt mit elektrisch leitenden Teilen
Lebensgefahr durch Stromschlag
• vor Benutzung Betriebsanleitung lesen
• vor Arbeiten am Gerät, Spannungsfreiheit sicherstellen
• Kontaktschutzblenden nicht entfernen
• Kontakt mit spannungsführenden Komponenten vermeiden.
• Steckkontakte nicht mit spitzen und metallischen Gegenständen berühren
• Verwendung nur in dafür vorgesehenen Umgebungen
• Gerät ausschließlich mit typenschildkonformem Netzteil betreiben!
• Gerät/Netzteil fern von Feuchtigkeit, Flüssigkeit, Dampf und Staub halten
• Eigenständige Modifikationen sind unzulässig
• Gerät nicht während eines Gewitters anschließen
• Geben Sie Ihr Gerät im Reparaturfall in den Fachhandel
GEFAHR
WARNUNG
VORSICHT
ACHTUNG
WARNUNG
2. Gefahren während Montage (wenn vorgesehen)
Scharfkantige Bauteile
Finger- oder Handverletzungen bei Zusammenbau (wenn vor-
gesehen) möglich
• vor Montage Betriebsanleitung lesen
• Kontakt mit scharfen Kanten oder spitzen Bauteilen vermeiden
• Bauteile nicht mit Gewalt zusammensetzen
• geeignetes Werkzeug verwenden
• nur gegebenenfalls mitgeliefertes Zubehör und Werkzeug verwenden
3. Gefahren durch Wärmeentwicklung
Mangelhafte Belüftung des Geräts/Netzteils
Überhitzung und Ausfall des Geräts/Netzteils
• externe Erwärmung vermeiden und Luftaustausch zulassen
• Lüfterauslass und passive Kühlkörper freihalten
• direkte Sonneneinstrahlung auf Gerät/Netzteil vermeiden
• ausreichend Umgebungsluft für Gerät/Netzteil sicherstellen
• keine Gegenstände auf dem Gerät/Netzteil abstellen
4. Gefahren durch Kleinstteile und Verpackung
Erstickungsgefahr
Lebensgefahr durch Ersticken oder Verschlucken
• Kleinteile, Zubehör für Kinder unzugänglich verwahren
• Plastiktüten und Verpackung für Kinder unzugänglich verwahren/entsorgen
• Kleinteile und Verpackungen nicht in Kinderhände geben
5. Möglicher Datenverlust Datenverlust bei Inbetriebnahme
Unwiederbringlicher Datenverlust möglich
• Unbedingt Hinweise in der Bedienungsanleitung/Schnellinstallationsanleitung beachten
• Produkt nur verwenden, wenn Spezifikationen erfüllt sind
• Datensicherung vor Inbetriebnahme durchführen
• Datensicherung vor Anschluss neuer Hardware durchführen
• dem Produkt beiliegendes Zubehör verwenden
VORSICHT
ACHTUNG
WARNUNG
ACHTUNG
Sicherheitshinweise IB-CAM502-HD
6. Reinigung des Gerätes Schädigende Reinigungsmittel
Kratzer, Farbveränderungen, Feuchteschäden oder Kurzschluss am Gerät
• vor Reinigung das Gerät außer Betrieb nehmen
• aggressive bzw. scharfe Reinigungs- und Lösungsmittel sind ungeeignet
• nach der Reinigung sicherstellen, dass keine Restfeuchtigkeit vorhanden ist
• Reinigung der Geräte am besten mit trockenem Antistatiktuch durchführen
7. Entsorgung des Gerätes
Umweltverschmutzung, Wiederverwertung nicht möglich
Mögliche Umweltbelastung durch Bestandteile, Recyclingkreislauf
unterbrochen
Dieses auf dem Produkt und der Verpackung angebrachte Symbol
zeigt an, dass dieses Produkt nicht mit dem Hausmüll entsorgt werden darf. In Überein-
stimmung mit der Richtlinie über Elektro- und Elektronik-Altgeräte (WEEE) darf dieses
Elektrogerät und ggf. enthaltene Batterien nicht im normalen Hausmüll oder dem Gel-
ben Sack entsorgt werden. Wenn Sie dieses Produkt und ggf. enthaltene Batterien
entsorgen möchten, bringen Sie diese bitte zur Verkaufsstelle zurück oder zum Recyc-
ling-Sammelpunkt Ihrer Gemeinde.
Die enthaltenen Batterien müssen vor Rückgabe vollständig entladen sein. Treffen Sie
Vorsorge, um die Batterien vor Kurzschluss zu schützen (z.B. durch das Isolieren der
Kontaktpole mit Klebeband)
unsere Internetseite www.icybox.de.
ACHTUNG
ACHTUNG
Sicherheitshinweise IB-CAM502-HD
Manual IB-CAM502-HD
Package content
1x IB-CAM502-HD, 1x remote control (incl. 1x CR2025L, 3 V, Lithium battery),
1x manual
Overview
1. Link LED (blue)
2. AI tracking LED (blue)
3. ON/OFF AI tracking button
4. Power LED (red)
5. Microphones
6. Glass optical lens
7. Build-in USB 2.0 Type-A plug
1 3 4
7
5
6
2
Manual IB-CAM502-HD
1. Fold-out clamp base for monitor mounting
2. Tiltable and rotatable base
3. 1/4" tripod thread on the bottom for tripods (not included)
4. Integrated cable for connection to host PC (170 cm)
1 3
2 4
Placed on top
of a monitor
Manual IB-CAM502-HD
Remote control
1. Increase brightness
2. Turn camera to the left
3. Decrease brightness
4. Privacy mask
5. AI tracking
6. Turn camera to the right
7. Reset brightness
8. Mirroring
Includes one CR2025L,
3 V Lithium battery
Note:
If the remote control does not work, please check first,
whether a new battery will solve the problem.
Use only the specified battery type (CR2025L, 3 V Lithium battery)
When replacing the battery, make sure that the battery is oriented correctly in the
battery compartment (positive pole (+) facing upwards).
4
5
2 6
7
8
3
1
Manual IB-CAM502-HD
Full HD webcam with microphone
Key features
• Full HD webcam for videos and live streams in best quality with up to
1080p
• High-resolution CMOS sensor with 30 frames per second
• Remote control for adjusting the picture brightness, for switching off the video,
for freely turning the camera to the left and right
• AI autotracking function - viewing angle with up to 350°
• Stereo audio with two microphones
• Ideal for home schooling, home office and video calls (Skype, Teams, Zoom, YouTube)
• Clamp foot for mounting on the monitor and with integrated 1/4“ tripod thread
• Plug & Play, no driver or software installation required
• Connection via USB 2.0 Type-A, supports OTG protocol
Manual IB-CAM502-HD
Usage
1. The IB-CAM502-HD features full Plug & Play support for Windows®and
macOS®!
2. Place the camera in front of you at a position of your choice (using the clamp
base at the top of a monitor is recommended)
3. Plug the USB 2.0 Type-A cable into a supported USB port of the host com-
puter. The illuminated red power LED (4) on the front panel indicates power
supply. Wait about one minute! The webcam will install automatically.
4. Start any application that accepts a USB video stream, such as Skype, Teams,
Zoom, YouTube, and begin using your camera. By starting a supported
application, the establishment of the connection is indicated by the lighting of
the blue LED (1) on the front.
3
2
1
Manual IB-CAM502-HD
AI auto tracking
Effective auto-tracking with a range < 3 metres.
When you are standing in front of the webcam, switch on the function via the auto-
tracking button (3). The illuminated blue LED (2) on the front indicates that the function
is activated.
Once you are detected, the camera will automatically track you when you move.
Manual IB-CAM502-HD
Remote control functions
A. Increase brightness / decrease brightness / reset brightness
By changing the brightness via the remote control, you can improve the picture quality
as desired for different requirements.
The reset button resets the settings to the default values.
B. Turn camera to the left / turn camera to the right
The webcam does not need to be rotated manually. The tracking function can be
realised via remote control.
During meetings with several people, the device does not have to be rotated manual-
ly, but can be rotated to the left and right between different people via remote control.
C. AI tracking
You can also switch the tracking function on or off via the remote control. After
switching on the function, the camera automatically tracks the moving person as
described above.
D. Mirroring
The screen can be displayed in mirror mode, which is suitable for e.g. dance lessons
and other special requirements, such as better recognition of portraits or objects.
E. Privacy mask
During a video conference, depending on the situation on site, you may just turn to
privacy mask via remote control. This pauses both the video and audio transmission.
When the button is pressed again, the transmission will be reactivated.
Manual IB-CAM502-HD
Note:
The IB-CAM502-HD can be connected to or disconnected from the computer via
USB cable without shutting down the computer.
Maybe the system will automatically install some of the required drivers once it is
connected to your computer’s USB Type-A port. If you receive any prompt, follow the
on-screen instructions to complete the installation.
To use the camera’s internal microphones, you will have to select them as a USB
audio input in your application settings.
Important:
If the computer does not automatically recognise the camera once it is plugged in,
try plugging it into a different USB port. If this does not work either, then restart the
computer. This will cause the camera to be recognised in most cases.
Q: How do I know if my video calling application can use the webcam?
A: All video applications have an option setting to check the audio and video device.
In the video application, check the following:
• Check the audio selection to ensure the USB 2.0 camera microphone is
selected. If it is not, change the selection to the USB 2.0 camera.
• Check the video selection to ensure the USB 2.0 camera is selected.
If it is not, change the selection to the USB 2.0 camera.
View camera on Windows®
Windows®10 users can use the camera app, which is already installed with the
operation system.
Manual IB-CAM502-HD
This will allow you to preview the camera image, capture still frames and video clips.
If you want to use the camera with other applications, you must activate the camera in
the Windows®security settings.
• To begin, select the Start button, and then select Camera in the list of apps,
or type “camera” in the search bar.
• If you want to use the camera within other apps, select the Start button,
select Settings > Privacy > Camera, and then turn on “Let apps use my
camera”.
• From there, activate each of the listed apps in which you want to use the camera.
After you open the Camera app, you may need to switch to the Full HD Camera
(IB-CAM502-HD).
Here is how to switch from one to another:
• Select Start > Camera > Change camera (button upper right).
When you can see an image from the camera:
• Select Photo or Video and take a photo or make a video.
• To view your new or already taken photo or video, select Start > Photos
and then select the desired collection.
View camera on macOS®
macOS®users can use the Photo Booth app, which is already installed with the OS.
This will allow you to preview the camera images, capture still frames and video clips.
Note:
Manual IB-CAM502-HD
While Photo Booth can be used to quickly preview the camera image, videos in
higher quality using the full camera resolution should be created in iMovie or QuickTi-
me, since Photo Booth does not use the full camera image.
As in Windows®, you may need to allow apps to be installed on your computer to
access the camera in the macOS®security settings.
• To begin, select the Finder button, click Applications, and start Photo Booth.
If you want to use the camera within other apps, you will need to enable access in the
macOS®Security & Privacy settings:
• Go to the Apple menu in the top left corner of the screen and choose System
Preferences.
• Go to the “Security & Privacy” preference panel.
• Select the Privacy tab then choose Camera from the left side list.
• Locate the app(s) that you want to enable camera access for, and check the
box alongside that app name to enable camera access for that application.
• To see an image from the camera in Photo Booth, you may need to select the
camera from the list of attached devices in the app.
• At the top of your screen, click Camera in the app menu, and select the Full
HD camera (IB-CAM502-HD) from the list of options.
When you can see an image from the camera:
• To capture images from the camera, click the red camera icon.
• To switch to video mode, click the film strip icon in the bottom left corner of the
Manual IB-CAM502-HD
app. The red camera icon will change to a video icon at which point you will
be able to record a video.
Capture HD video with QuickTime player
QuickTime on macOS®offers a method for easily creating video recordings that use
the full camera resolution.
• To begin, select the Finder button, click Applications, and start QuickTime
Player.
• After QuickTime launches, click File > New Movie Recording.
• To select the camera input, click the small downward-facing arrow next to the
round record button.
• Click the record button to capture a video.
View camera on Android™.
• You will need a USB OTG (On-The-Go) adapter from USB Type-A to
Type-C®or Micro-B, depending on the existing port on the Android™device
(not included).
• You will need an Android™app that supports USB webcams (search for: USB
Webcam).
• After installing the app of your choice and connecting the camera via OTG
adapter, you can use the camera via the app interface.
Manual IB-CAM502-HD
Caution
If the webcam becomes hot after running for a long time, we suggest that you stop
using it for a while.
• Avoid touching the lens with fingers, sharp or coarse materials, and use a
clean, soft cloth for cleaning.
• Do not use the camera in hot, cold, dusty or humid environments.
• Avoid dropping the camera, as impacts may cause damage to the lens,
internal malfunction or scratches to the camera surfaces.
Handbuch IB-CAM502-HD
Verpackungsinhalt
IB-CAM502-HD, 1x Fernbedienung (inkl. 1x CR2025L, 3 V Lithium Batterie),
1x Handbuch
Übersicht
1. LED Indikator für Verbindung (blau)
2. LED für AI Verfolgung (blau)
3. EIN/AUS AI Verfolgungstaste
4. LED für Betrieb (rot)
5. Mikrofone
6. Optische Linse aus Glas
7. Integrierter USB 2.0 Type-A Anschluss
1 3 4
7
5
6
2
Table of contents
Languages:
Other Icy Box Webcam manuals
