iDataLink BLADE Series User manual

NOTICE: The manufacturer will accept no responsibility for any electrical damage resulting from
improper installation of this product, be that either damage to the vehicle itself or to the installed
device. This device must be installed by a certified technician. This guide has been written for
properly trained technicians; a certain level of skill & knowledge is therefore assumed. Please
reviewtheInstallation Guide carefullybefore beginning any work.
!
The brand names and logos found in this guide are property of their respective owners. Automotive Data Solutions Inc. © 2017
U.S. PATENT NO. 8,856,780
Automotive Data Solutions Inc.
INSTALL GUIDE
BLADE-AL(DL)-VO4-EN
AVAILABLE FOR: ADS-BLADE AL
VO4
PLEASE VISIT WWW.IDATALINK.COM FOR COMPLETE PRODUCT DETAILS
Rev. Date: April 28, 2017
Doc. No.: ##38805##
20170427

U.S. Patent No. 8,856,780
INSTALL TYPE SELECTION
MAKE MODEL YEAR INSTALL TYPE
FEATURES
DATA IMMOBILIZER BYPASS ARM OEM ALARM DISARM OEM ALARM DOOR LOCK DOOR UNLOCK POWER LIFTGATE RETRACTABLE MIRROR CTRL SECURE TAKE OVER DOOR STATUS OUTPUT TRUNK STATUS OUTPUT HOOD STATUS OUTPUT* BRAKE PEDAL STATUS OUTPUT E-BRAKE OUTPUT TACHOMETER OUTPUT
VOLVO
XC60 Second Edition PTS 12 1 • • • • • • • • • • • •
XC60 Second Edition PTS Keyless drive 12 1 • • • • • • • • • • • • • •
XC60 PTS 13-16 1 • • • • • • • • • • • •
XC60 PTS Keyless drive 13-16 1 • • • • • • • • • • • • • •
XC70 PTS 12 1 • • • • • • • • • • • •
XC70 PTS Keyless drive 12 1 • • • • • • • • • • • • • •
*Available only if vehicle is equipped with factory hood switch.
Page 2 of 8 BLADE-AL(DL)-VO4-EN 20170427
INSTALL GUIDE
WWW.IDATALINK.COM Automotive Data Solutions Inc. © 2017
DOORLOCK INTERFACE
VolVo
Doc. No.: ##38805##

U.S. Patent No. 8,856,780
TYPE 1 - WIRE CROSS REFERENCE CHART
MAKE MODEL YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR
VOLVO
XC60 PTS 12-16
12V ~ Green 3 pin 1 Red (+) Immobiliser ~
Ground ~ Green 3 pin 3 Black (-) Immobiliser ~
PTS 1 ~ Green 5 pin 2 Blue (+) Push button ~
PTS 2 ~ Green 5 pin 3 Gray (+) Push button ~
Immobiliser LIN ~ Green 3 pin 2 Gray (DATA) Immobiliser ~
Brake ~ ~ ~ ~ Purple/White (+) Driver kick panel ~
CanH ~ ~ ~ ~ Gray/Orange (DATA) Driver kick panel ~
CanL ~ ~ ~ ~ Purple/Orange (DATA) Driver kick panel ~
Ignition ~ ~ ~ ~ Blue/Red (+) Driver kick panel ~
Trunk LIN ~ Black 6 pin 6 Green/Purple (DATA) Parking light switch ~
XC70 PTS 12
12V ~ Green 3 pin 1 Red (+) Immobiliser ~
Ground ~ Green 3 pin 3 Black (-) Immobiliser ~
PTS 1 ~ Green 5 pin 2 Blue (+) Push button ~
PTS 2 ~ Green 5 pin 3 Gray (+) Push button ~
Immobiliser LIN ~ Green 3 pin 2 Gray (DATA) Immobiliser ~
Brake ~ ~ ~ ~ Purple/White (+) Driver kick panel ~
CanH ~ ~ ~ ~ Gray/Orange (DATA) Driver kick panel ~
CanL ~ ~ ~ ~ Purple/Orange (DATA) Driver kick panel ~
Ignition ~ ~ ~ ~ Blue/Red (+) Driver kick panel ~
Trunk LIN ~ Black 6 pin 6 Green/Purple (DATA) Parking light switch ~
Page 3 of 8 BLADE-AL(DL)-VO4-EN 20170427
INSTALL GUIDE
WWW.IDATALINK.COM Automotive Data Solutions Inc. © 2017
DOORLOCK INTERFACE
VolVo
Doc. No.: ##38805##

U.S. Patent No. 8,856,780
TYPE 1 - WIRING DIAGRAM
321
654
6
321
54321
2 1
23
86
30
87
87A
85
3
1N4001
DIODE
1N4001
DIODE
1N4001
DIODE
PARKING LIGHT
CONNECTOR - BLACK
TRUNK LIN (DATA)
BLUE/RED (NC)BLUE/RED (NC)
BLUE/YELLOW (NC)
BLUE/YELLOW (NC)
GREEN/RED - IMMO. LIN VEHICLE SIDE
BLACK (NC)
BLACK (NC)
GRAY/RED - IMMO. LIN CONNECTOR SIDE
GRAY/YELLOW (NC)
GRAY/YELLOW (NC)
REMOTE STARTER
IMMO. LIN (DATA)
IGNITION (+)
CANH
CANL
BRAKE POWER (+)
GROUND (-)
12V (+)
PTS 1 (+)
PTS 2 (+)
TRUNK (-) OUTPUTTRUNK (-) OUTPUT
BROWN/RED - CANH
YELLOW - PTS (+) OUTPUT
YELLOW - PTS (+) OUTPUT
BROWN/YELLOW - CANL
ORANGE/BLACK - TRUNK LIN (DATA) OUTPUT
ORANGE/WHITE (NC)
ORANGE - BRAKE POWER (+) OUTPUT
ORANGE - BRAKE POWER (+) OUTPUT
PINK/BLACK (NC)
PINK - IGNITION (+) INPUT
PINK - IGNITION (+) INPUT
WHITE/BLACK
WHITE/BLACK - IMMO. LIN VEHICLE SIDE
WHITE/RED
WHITE/RED - IMMO. LIN CONNECTOR SIDE
WHITE (NC)
WHITE (NC)
HARNESS IN DRIVER KICK PANEL
12V (+)12V (+)
GROUND (-)
GROUND (-)
IGNITION (+) INPUTIGNITION (+) INPUT
12V (+)
DRIVER KICK PANEL
PUSH TO START
CONNECTOR - GREEN
IMMOBILIZER
LIN
CONNECTOR
GREEN
WARNING: DO NOT POWER (12V)
THE PINK/BLACK - BRAKE STATUS (+) OUTPUT WIRE
ON THE MODULE SIDE.
IT WILL PERMANENTLY DAMAGE THE MODULE.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
GRAY/RED GRAY/YELLOW
BLUE/YELLOW
YELLOWGREEN/RED
BLUE/RED
NO WIREORANGE
ORANGE/WHITEORANGE/BLACK
BROWN/YELLOWBROWN/RED
BLACKNO WIRE
PINKPINK/BLACK
NO WIREWHITE
WHITE/BLACKWHITE/RED
*BLADE CONNECTOR
EXACT PIN-OUT
Page 4 of 8 BLADE-AL(DL)-VO4-EN 20170427
INSTALL GUIDE
WWW.IDATALINK.COM Automotive Data Solutions Inc. © 2017
DOORLOCK INTERFACE
VolVo
Doc. No.: ##38805##

U.S. Patent No. 8,856,780
CARTRIDGE INSTALLATION
1Slide cartridge into unit. Notice
button under LED. 2Ready for Module Programming Procedure.
MODULE PROGRAMMING PROCEDURE - WITH KLON - 1 OF 2
1Open driver door.
5Press and hold start button to
ON position.
Æ
7Push start button once [1x] to
OFF position.
x1
Æ
4Insert keyfob 1 in keyport.
(Top part)
Æ
2Remove valet key from keyfob 1.
Æ
Æ
3Remove batteries from keyfob 1.
(Bottom part)
Æ
6If LED fl ashes BLUE once [1x].
(This may take up to 10 seconds)
Proceed to the following step.
If LED fl ashes RED once [1x]
then fl ashes BLUE three times
[3x]. Use the DL-VO3 solution.
x1
11 Insert keyfob 1 in keyport.
(Top part)
Æ
10 Remove keyfob 1 from keyport.
(Top part)
Æ
13 Wait, LED will turn solid RED
then will fl ash BLUE rapidly.
ÈIMPORTANT: READ NEXT PAGE !
12 Press and release
programming button.
8Press and release
programming button.
9Wait, LED will turn solid RED
then will fl ash BLUE twice [2x].
x2
Page 5 of 8 BLADE-AL(DL)-VO4-EN 20170427
INSTALL GUIDE
WWW.IDATALINK.COM Automotive Data Solutions Inc. © 2017
DOORLOCK INTERFACE
VolVo
Doc. No.: ##38805##

U.S. Patent No. 8,856,780
MODULE PROGRAMMING PROCEDURE - WITH KLON - 2 OF 2
25 Module Programming
Procedure completed.
19 Proceed with extended
programming.
21 Insert keyfob 1 in keyport.
Æ
24 Remove keyfob 1 from keyport.
Æ
14 Remove keyfob 1 from keyport.
(Top part)
Æ
17 Remove remote starter from
vehicle.
Æ
15 Disconnect all connectors from
remote starter except the power
connector.
   
   
16 Disconnect the power
connector.
18 Connect remote starter to
computer.
Æ
20 Connect remote starter to
vehicle.
Æ
22 Press and release
programming button.
23 Wait, LED will turn solid RED
then will turn solid BLUE for 2
seconds. (This may take up to
10 seconds)
Page 6 of 8 BLADE-AL(DL)-VO4-EN 20170427
INSTALL GUIDE
WWW.IDATALINK.COM Automotive Data Solutions Inc. © 2017
DOORLOCK INTERFACE
VolVo
Doc. No.: ##38805##

U.S. Patent No. 8,856,780
BLADE-AL PAGE 1-1
LED STATUS
DIAGNOSTICS
DURING PROGRAMMING DURING REMOTE START WITH IGNITION OFF
Flashing RED Missing/wrong information from
fi rmware or vehicle Incorrectly programmed Incorrectly programmed or connected
Solid RED Waiting for more vehicle information Incorrectly programmed Not programmed waiting for more
vehicle information
Flashing BLUE Additional steps required to complete
programming
Correctly programmed and
operational
False ground when running status
from remote starter
Solid BLUE then OFF Correctly programmed Reset in progress Reset in progress
OFF No activity or already programmed Invalid ground when running status
from remote starter
At rest and ready for a remote start
sequence
MODULE DIAGNOSTICS
FACTORY RESET PROCEDURE
5RECONNECT all connectors.
Repeat programming procedure.
!Failure to follow procedure may result with a DTC or a
CHECK ENGINE error message.
1DISCONNECT cartridge from
remote starter.
2PRESS AND HOLD programming
button while re-connecting
cartridge to remote starter.
3LED will fl ash red. Immediately
RELEASE programming button.
4LED will turn solid red for 2
seconds.
RESET COMPLETED.
IDENTIFY VEHICLE YEAR
1 Locate the Vehicle Identifi cation Number (VIN), identify the 10th
character then match it to its corresponding year.
4 Y 1 N53 A 5 T A L 8 D 5 R 0 X
Æ
A1980 L1990 Y2000 A2010
B1981 M1991 12001 B2011
C1982 N1992 22002 C2012
D1983 P1993 32003 D2013
E1984 R1994 42004 E2014
F1985 S1995 52005 F2015
G1986 T1996 62006 G2016
H1987 V1997 72007 H2017
J1988 W1998 82008 J2018
K1989 X1999 92009 K2019
Æ
Page 7 of 8 BLADE-AL(DL)-VO4-EN 20170427
INSTALL GUIDE
WWW.IDATALINK.COM Automotive Data Solutions Inc. © 2017
DOORLOCK INTERFACE
VolVo
Doc. No.: ##38805##

U.S. Patent No. 8,856,780
TAKE OVER PROCEDURE WITHOUT KEYLESS DRIVE - TO THE VEHICLE OWNER
5Take over procedure completed.
4Press and release BRAKE pedal.
!Failure to follow procedure within time restriction will
result in vehicle engine shutdown.
2TIME RESTRICTI
º N
Within 45 SECONDS from
previous step:
Open vehicle door.
Enter vehicle.
Close vehicle door.
NOTE
I All vehicle doors must be closed and locked prior to remote
start sequence.
1Press UNLOCK on after-market
remote.
ÈTIME RESTRICTI
º N COMING UP !
3Insert keyfob in keyport.
Æ
TAKE OVER PROCEDURE WITH KEYLESS DRIVE - TO THE VEHICLE OWNER
3Take over procedure completed.
2Press and release BRAKE pedal.
!Failure to follow procedure will result in vehicle engine
shutdown.
!To open the trunk/lifgate during the takeover: Press
UNLOCK on the after-market remote before opening the
trunk/lifgate.
1Have OEM remote within 5 feet
(1.5 meters) of the vehicle door.
Open vehicle door.
Enter vehicle.
Close vehicle door.
NOTE
I All vehicle doors must be closed and locked prior to remote
start sequence.
Page 8 of 8 BLADE-AL(DL)-VO4-EN 20170427
INSTALL GUIDE
WWW.IDATALINK.COM Automotive Data Solutions Inc. © 2017
DOORLOCK INTERFACE
VolVo
Doc. No.: ##38805##