Idea TEC112-P User manual

1
QS_TEC112-P_EN_v3.2.4
TEC112-P
12” Passive Loudspeaker Quick Start Guide
TEC112-P is installation loudspeaker solution for the entertainment market that
features premium materials and components with a solid construction and
superior sonic delivery.
Despite the TEC112-P compact format enclosure, the relatively large internal
volume and port area provide this loudspeaker with an extended frequency
response from below 50 Hz to sizzling HF tone thanks to the PM4 compression
driver membrane.
The sound characteristics of the TEC112-P are tailored to benet both vocal
live performances with a natural response for KTV and small stages, strong
full range BGM/FGM reproduction in lounges and clubs, and high impact
clear reproduction of AV material in screening rooms and high-end home
cinemas. A high directivity aluminium horn with asymmetrical coverage (90º
horizontal, 40º vertical) achieves a useful focus of the energy on the audience
and performers and away from low oors and ceilings, minimizing unwanted
interactions with the room acoustics in the HF.
The new design light weight 2.5 voice coil 12” woofer balances perfectly
detailed midrange performance in the crossover region and long excursion and
high-power management for deep and present LF reproduction.
The enclosure design of the TEC112-P is discreet yet high quality nish, to
match such wide variety of applications and environments and it allows to be
installed both vertically and horizontally by rotating the 90˚ x 40˚ horn and
using any of the different installation options, vertical U-bracket, horizontal
U-bracket, rear wall mount and even pole mount.
This makes the TEC112-P and excellent investment for the AV project
integrators and Entertainment venue owners that seek high quality
professional sound, contained cost and maximum versatility.
INSTALLATION ACCESSORIES
TEC112-P is tted with 9 threaded M8 inserts for vertical/horizontal hung
permanent installations as well as bottom 36 mm pole-mount socket that
serves for both pole mount congurations onto a BASSO Series subwoofer
and for wall-mount installations with the dedicated optional accessory.
Dedicated U-Bracket accessories are also available for horizontal and vertical
wall-mount installations.

2
QS_TEC112-P_EN_v3.2.4
TECHNICAL DATA
IEC ltered pink noise with a 6dB crest factor, 2 hours.
*
Frequency range values for recommended factory presets.
**
370 mm 360 mm
615 mm
Enclosure design Trapezoidal · Bass-Reex
HF Transducer 1 x 1.75˝/ 1” Exti Compression Driver
LF Transducer 1 x 12” Woofer
RMS Power Handling * 450 W
Nominal Impedance 8 Ohm
SPL (Continuous/Peak) 125/131 dB SPL
Frequency Range (-10 dB) 48 - 18000 Hz
Frequency Range (-3 dB) 65 - 17000 Hz
Coverage 40° x 90˚ Rotatable horn
Dimensions (WxHxD) 360 x 615 x 370 mm
(13.4 x 24,2 x 13.4 inch)
Weight 20 kg (44 lbs)
Connectors
+/- 1
+/- 2
2 x Neutrik speakON® NL-4 in parallel
Full-Range Signal
parallel Signal
Cabinet Construction 16 mm DMF
Grille 1.5 mm perforated weatherised steel with protective foam
Finish Durable IDEA proprietary Aquaforce high-resistance paint coating process
Handles 2 integratedhandle
Installation 4 Rubber feet
9 x threaded M8 inserts
Accessories UB-TEC112 installation accessory
FREQUENCY RESPONSE
50 100 200 500 1k 2k 5k 10k 20kHz
90
80
100
110
120
130
20 Hz
dB SPL
This graph shows the frequency response
for a 1-watt swept sine signal in an
anechoic environement (4pi), measured at
3 m and scaled down at 1 m.
In order to provide more precise
information for acoustical analysis, a 1/12
octave smoothing has been applied.
TECHNICAL DRAWINGS

3
QS_TEC112-P_EN_v3.2.4
I MAS D Electroacústica SL
Constitución 5 – 9, 46009 VALENCIA (Spain)
Declares that: TEC112-P
Complies with the following EU Directives:
• RoHS (2002/95/CE) Restriction of Hazardous Substances
• LVD (2006/95/CE) Low Voltage Directive
• EMC (2004/108/CE) Electro-Magnetic Compatibility
• WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
• EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements.
• EN 55103-1: 1996 Electromagnetic compatibility: Emission
• EN 55103-2: 1996 Electromagnetic compatibility: Immunity
DECLARATION OF CONFORMITY
WARNINGS AND SAFETY GUIDELINES
WARRANTY
!
• All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts
and 2 years from date of purchase for electronic devices.
• The guarantee excludes damage from incorrect use of the product.
• Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
• Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
• Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order
to claim guarantee service or replacement.
• Read this document thoroughly, follow all safety warnings and keep it for future reference.
• The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by quali-
ed and authorized personnel.
• No user serviceable parts inside.
• Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
• Installations, rigging and suspension operations must be done by qualied personnel.
• Only use accessories specied by IDEA, complying with maximum loads specications and following local safety regulations.
• Read the specications and connection instructions before proceeding to connect the system and use only cabling supplied or recom-
mended by IDEA. Connection of the system should be done by qualied personnel.
• Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the
system while in use.
• Loudspeaker produce magnetic eld even while they are not in use or even when disconnected. Do not place or expose loudspeakers to
any device that is sensitive to magnetic elds such as television monitors or data storage magnetic material.
• Disconnect the equipment during lightning storms and when it is not to be used for a long time.
• Do not expose this device to rain or moisture.
• Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
• Clean with a wet cloth. Do not use solvent-based cleaners.
• Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
• Refer all servicing to qualied service personnel.
• This symbol on the product indicates that this product should not be treated as household waste. Follow local regulation for recycling of
electronic devices.
• IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.

4
QS_TEC112-P_EN_v3.2.4
For further information scan the QR Code
or refer to the following web address: www.ideaproaudio.com
www.ideaproaudio.com
IDEA is always in pursuit of better performance, greater reliability and design features.
Technical specications and minor nish details may vary without notice in order to improve our products.
©2018 - I MAS D Electroacústica SL
Av. Constitución 5-9 46009 VALENCIA