Ideal-Standard Alto Toilet Seat User manual

!
Ensure that the plastic sleeves,
that lock the seat and cover
together, are present, Figure 1,
before inserting the hinge pins into
the sleeves.
Check the orientation of the
hinges, Wall Hung pans throw
backwards, Figure 2a, Close
Coupled and Back to Wall pans
throw forwards, Figure 2b. This
ensures that the seat lines up
correctly.
Fit rubber centralising washers
into the holes in the pan and
lower the seat and cover, Figure 3,
ensuring that the hinges are
inserted in the holes in the
centralising washers.
Firstly fit a plastic coated
washer, then a steel spring washer
and nut to the thread of each hinge,
Figure 4, before tightening with the
tool provided.
Figure 1
Figure 2a
Figure 2b
Figure 3
Figure 4
Sleeve
Sleeve
Hinge Pin

Toilet Seat Installation
Alto and Halo Closets
Important Care and
Installation Instructions,
Please retain for future reference.
GIN28XX Revision No: 05
 CARE AND CLEANING INSTRUCTIONS
-  The seat and cover should be cleaned using warm soapy 
 water.
-  Do not use aggressive or abrasive cleaners as this may 
 scratch the surface of the seat.
-  The hinges should be cleaned using soap, or a mild  
 detergent. After cleaning the hinges should be rinsed in 
 clean water and dried.
-  Never use bleach, concentrated cleaners or acids on the 
 hinges as this will cause discolouring and pitting.
-  Do not leave bleach in the toilet bowl with the cover  
 closed because this may cause discolouration of the seat 
 and hinges.
-  Take care not to splash the hinges when using bleach in 
 the toilet bowl.
Ideal Standard (UK) Ltd. pursues a policy of continuing
improvement in design and performance of its products.
The right is, therefore, reserved to vary specifications
without notice.
The Bathroom Works
National Avenue
Kingston upon Hull
HU5 4HS
England
Telephone: [phone]
Telefax: [phone].
CCUUSSTTOOMMEERRCCAARREEHHEELLPPLLIINNEE
FFAAXXLLIINNEE0011448822449999661111
4453 05/08
0870 1296085
[email protected]