Idis DA-TM4100 User manual

DA-TM4100 INSTALLATION MANUAL
This manual is intended for users of the DA-TM4100 wall mounting
bracket. It includes instructions for mounting the DA-TM4100 wall
mounting bracket to a wall.
• This bracket is intended to be used with a specic
model of camera. Do not use it with other models of
cameras except for those approved by the dealer or
distributor.
• This installation should be performed by a qualied
service personnel in conformance to all local codes.
• You may need to reinforce the wall. If the wall is not
strong enough to support the camera, the camera
may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the wall as follows:
1 Insert cables from external devices, network and
power adapter to the sponge and bracket.
2 Mount bracket to the wall by using the provided
anchors and screws.
Bracket
Wall Hole
Connect your camera to the bracket as follows:
3 Screw the camera body onto bracket.
Bracket
Camera
body

IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
4 Secure the top cover to the body by turning it colckwise.
Camera
body
Camera
Top Cover
5 Turn on power.
Dimension
Unit: mm (inch)
Ø121 (4.76)
2-M4 TAP, Thru
106 (4.17)
50.7 (1.99)
20 (0.78)
15°
30 (1.18)
90 (3.54)
57 (2.24)
Ver.1.0