Idis DA-WM1200 User manual

This manual is intended for users of the DA-WM1200 wall mounting
bracket. It includes instructions for mounting the DA-WM1200 wall
mounting bracket to a wall.
•This bracket is intended to be used with DC-D series
model of camera. Do not use it with other models of
cameras.
•This installation should be performed by a qualified
service personnel in conformance to all local codes.
•You may need to reinforce the wall. If the wall is not
strong enough to support the camera, the camera may
fall.
•Do not use this product for other purposes.
Mounting
Mount the bracket to the wall as follows:
1 Attach rubber 1 to bracket 1.
Bracket 1 Rubber 1
2 Insert cables from external devices, network and
power adapter through the hole in the rear of
bracket 1.
3 Mount bracket 1 to the wall by using the screws.
Bracket 1
Rubber 1
Cable
4 Attach rubber 2 onto bracket 2.
5 Screw bracket 2 to bracket 1.
Bracket 2
Rubber 2
Bracket 1
DA-WM1200 INSTALLATION MANUAL

IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
6 Connect hexagon screw supports to the screw
holes marked as 4 on bracket 2.
7
Screw the plate to the hexagon screw supports.
Plate
Screw Support
Bracket 2
Connect your camera to the bracket as follows:
8 Screw the camera bottom cover
onto the plate.
9 Connect the camera dome cover
onto the camera bottom cover.
10 Turn on power.
< Plastic Dome Camera > < Vandal Dome Camera >
Plate
Camera
Bottom
Cover
Camera
Dome
Cover
Plate
Camera
Bottom
Cover
Camera
Dome
Cover
Dimensions
Unit: mm (inch)
123.5 (4.86)
105.0 (4.13)
237.5 (9.35)
54.0 (2.13)
(Combined Hole Position)
90.0 (3.54)
56.0
(2.20)
3- 5.0 (0.20) HOLE
Ver.1.0