Idis DC-B1203X User manual

Network
Camera
Quick Guide
Powered by
DC-D1223WX / DC-B1203X

2
Safety Precautions
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do
not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the
approval of the manufacturer as such additions may result in the
risk of re, electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling that is not
strong enough to sustain the camera. The equipment may fall,
causing serious injury to a child or adult, and serious damage
to the equipment. Wall or shelf mounting should follow the
manufacturer’s instructions, and should use a mounting kit
approved by the manufacturer.
This equipment and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sucient
ventilation is required to prevent an increase in ambient
temperature which can cause malfunction or the risk of re.
7. Power Sources
This equipment should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power, please consult your equipment dealer or local
power company.
You may want to install a UPS (Uninterruptible Power Supply)
system for safe operation in order to prevent damage caused by
an unexpected power stoppage. Any questions concerning UPS,
consult your UPS retailer.
8. Power Cord
Operator or installer must remove power and TNT connections
before handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the equipment due to
lightning and power-line surges. If thunder or lightning is common
where the equipment is installed, use a surge protection device.
10. Overloading
Do not overload wall outlets and extension cords as this can result
in the risk of re or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this
equipment as they may touch dangerous voltage points or short
out parts that could result in a re or electric shock. Never spill
liquid of any kind on the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all
servicing to qualied service personnel.
13. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualied service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following
the operating instructions, adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualied technician to restore
the equipment to its normal operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance
— this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specied by the
manufacturer or that have the same characteristics as the original
part. Unauthorized substitutions may result in re, electric shock
or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask
the service technician to perform safety checks to determine that
the equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualied service person and
should conform to all local codes.
17. Correct Batteries
Warning: Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.
18. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specied so that the customer
and installer may determine a suitable maximum operating
environment for the equipment.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards
English

3
FCC Compliance Statement
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15
OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE, IN
WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE CAUSING EQUIPMENT REGULATIONS.
WEEE (Waste Electrical & Electronic Equipment)
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government oce,
for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
Copyright
© 2013 IDIS Co., Ltd.
IDIS Co., Ltd. reserves all rights concerning this operation manual.
Use or duplication of this operation manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.
Contents of this operation manual are subject to change without prior notice for reasons such as functionality enhancements.
Registered Trademarks
IDIS is a registered trademark of IDIS Co., Ltd.
Other company and product names are registered trademarks of their respective owners.
This product contains software built partially on open-source content. Codes for the corresponding open-source content are available
for download. For more information, refer to the software CD (OpenSourceGuide\OpenSourceGuide.pdf) or the open source guide
accompanying this operation manual.
Accessories
Upon purchasing the product, check inside the box to make sure all the following accessories are included. Some parts may dier
depending on the situation.
Camera Type Item
DC-D1223WX
Network Camera
Open Source Guide
Quick Guide
Allen wrench
Screws (3 ea.)
Desiccant and cable access hole rubber
DC-B1203X
Network Camera
Open Source Guide
Quick Guide
C-Mount Ring
Installation Parts
Protective Cover (attaches to camera)
English

4
Overview
• Product color and design may vary depending on the model.
• For more details on each part name, refer to the operation manual.
DC-D1223WX Model
1
2
3
4
5
6
7
13
12
11
10
9
8
1Lens 8Wall/Ceiling
Installation Hole
2Lens Rotator 9Dome Cover Screw
Hole
3Horizontal Rotator 0Bottom Cover
4SD Memory Card Slot !I/O Device Port
5Factory Reset Switch @Cable Access Hole
6Safety Wire Screw
Hole #Vertical Rotation Adjustment Screw
7O-Ring Groove
I/O Device Port
1 2 3 4 5 6 7
1Alarm I/O 5Network LED
2Audio I/O 6Network Port
3Video Out 7Power LED
4Power
DC-B1203X Model
Front
1
2
1
2
3
4
5
6
VIDEO
OUT
DC 12V
FGND NETWORK+
-
Alarm
GND 3
2
1
OUT
IN
RS485
-
8
9
+
Audio
GND
GND
3
2
2
1
OUT
IN
1
2
3
4
1
2
3
4
5
1Built-in Microphone 2Image Sensor
Rear
1
2
1
2
3
4
5
6
VIDEO
OUT
DC 12V
FGND NETWORK+
-
Alarm
GND 3
2
1
OUT
IN
RS485
-
8
9
+
Audio
GND
GND
3
2
2
1
OUT
IN
1
2
3
4
1
2
3
4
5
1Auto Iris Lens
Connector 4Network Port
2Video Out 5Network LED
3Power 6Power LED
English

5
Side
1
2
1
2
3
4
5
6
VIDEO
OUT
DC 12V
FGND NETWORK+
-
Alarm
GND 3
2
1
OUT
IN
RS485
-
8
9
+
Audio
GND
GND
3
2
2
1
OUT
IN
1
2
3
4
1
2
3
4
5
1Protective Cover 4Mount Bracket
2C-Mount Ring 5SD Memory Card Slot
3Back Focus
Adjustment Ring
Top
1
2
1
2
3
4
5
6
VIDEO
OUT
DC 12V
FGND NETWORK+
-
Alarm
GND 3
2
1
OUT
IN
RS485
-
8
9
+
Audio
GND
GND
3
2
2
1
OUT
IN
1
2
3
4
1
2
3
4
5
1RS485 Port 3Alarm I/O
2Audio I/O 4Factory Reset Switch
Camera Installation
DC-D1223WX Model
Attach the enclosed desiccant beside the safety
wire screw inside the dome cover to prevent
moisture.
Guide Pattern
1 Use the screws provided with the camera to secure
the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screws.
2 Connect external devices, the network cable, and
the power adapter. Block the cable access hole
for waterproong by using the enclosed cable
access hole rubber when routing cables and wires.
Waterproong sealing is required by using silicone
etc. after blocking the cable access hole. Ask your
retailer for details.
3 Adjust the angle of the lens. For more details, refer
to Angle Adjustment.
4 Adjust the focus and zoom levers.
5 Attach the shield case to the vertical rotation
adjustment screw and secure it in place.
English

6
6 Attach the dome cover to the bottom cover.
Use
the provided screws to secure the dome cover on
to the bottom cover.
7 Connect the power.
Check the wall or ceiling to see if it needs
to be reinforced. The camera may fall o if
the wall or ceiling is not strong enough to
support its weight.
Angle Adjustment
2
3
1
1Lens Rotation 3Horizontal Rotation
2Vertical Rotation
DC-B1203X Model
CS-Mount Lens
C-Mount Lens
Manual Iris Lens
1 Remove the protective cover from the camera.
2 Turn the lens in clockwise direction and mount it
on the camera.
3 Rotate the lens' iris ring to open up the iris and
then adjust accordingly.
DC Type Auto Iris Lens
1 Solder on the lens connection line to the
connector socket, if necessary. For more
information about soldering on the lens control
wire, refer to the lens manufacturer's operation
manual.
2 Remove the protective cover from the camera.
3 Turn the lens in clockwise direction, mount it on
to the camera, and connect the auto iris jack to
the auto iris lens connector.
The auto iris jack must be at least 20cm
long in order to connect it to the camera.
CS-Mount Lens
1 Remove the protective cover from the camera.
2 Turn the lens in clockwise direction and mount it
on the camera.
C-Mount Lens
1 Remove the protective cover from the camera.
2 Turn the mount ring in clockwise direction and
mount the ring on to the camera.
3 Turn the C-mount lens in clockwise direction and
mount it on to the C-mount ring.
English

7
Specications
DC-D1223WX Model
External Dimensions (Ø x H) 160mm x 112mm (6.3” x 4.4”)
Packaging Dimensions (W x H x D) 203mm x 174mm x 203mm (7.99” x 6.85”x 7.99”)
Weight (Main Unit) 0.87kg (1.92lb)
Weight (Packaging) 1.18kg (2.6lb)
Working Temperature -10˚C ~ 50˚C (14˚F ~ 122˚F) [Starting Temperature: 0˚C ~ 50˚C (32˚F ~ 122˚F) ]
Operating Humidity 0% ~ 90%
Power Input 12V DC, PoE(IEEE 802.3af, Class2)
Power Consumption Max. 5.1W
Certications FCC, CE, KC, IP66
DC-B1203X Model
Exterior Dimensions (W x H x D) 75.62mm x 61.02mm x 129.32mm (2.98” x 2.4” x 5.09”)
Packaging Dimensions (W x H x D) 194mm x 113mm x 149mm (7.64”x 4.45” x 5.87”)
Weight (Main Unit) 0.4 kg (0.88 lbs.)
Weight (Packaging) 0.68 kg (1.50 lbs.)
Working Temperature -10˚C ~ 50˚C (14˚F ~ 122˚F) [Starting Temperature: 0˚C ~ 50˚C (32˚F ~ 122˚F)]
Operating Humidity 0% ~ 90%
Power 12 VDC, PoE (IEEE 802.3af, Class 2)
Power Consumption Max. 5.5W
Certications FCC, CE, KC
Ver 1.0
•DirectIP NVR makes it easy to use cameras without extra network congurations.
Each camera can be controlled via the DirectIP™ NVR setup menu, without any PC.
– For detailed camera settings, please see the camera setting pages of DirectIP™ NVR manual.
•To use your camera with non-DirectIP system (e.g. other NVR or VMS), refer to the camera
manual and it can be downloaded from our website: www.idisglobal.com.
English

8
Memo
English

9
Memo
English

10
Memo
English

11
Memo
English