Idis DC-D3233WRX User manual

Network
Camera
Quick Guide
Powered by
DC-D3233HRX / DC-D3233WRX
DC-D3233RX / DC-D3233X

2Quick Guide
Safety Precautions
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do
not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the
approval of the manufacturer as such additions may result in the
risk of re, electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling
that is not strong enough to sustain the camera. The
equipment may fall, causing serious injury to a child
or adult, and serious damage to the equipment. Wall
or shelf mounting should follow the manufacturer’s
instructions, and should use a mounting kit approved by the
manufacturer.
This equipment and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sucient
ventilation is required to prevent an increase in ambient
temperature which can cause malfunction or the risk of re.
7. Power Sources
This equipment should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power, please consult your equipment dealer or local
power company.
You may want to install a UPS (Uninterruptible Power Supply)
system for safe operation in order to prevent damage caused by
an unexpected power stoppage. Any questions concerning UPS,
consult your UPS retailer.
This equipment should be remain readily operable.
8. Power Cord
Operator or installer must remove power and TNT connections
before handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the equipment due to
lightning and power-line surges. If thunder or lightning is common
where the equipment is installed, use a surge protection device.
10. Overloading
Do not overload wall outlets and extension cords as this can result
in the risk of re or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this
equipment as they may touch dangerous voltage points or short
out parts that could result in a re or electric shock. Never spill
liquid of any kind on the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all
servicing to qualied service personnel.
13. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualied service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following
the operating instructions, adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualied technician to restore
the equipment to its normal operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance
— this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specied by the
manufacturer or that have the same characteristics as the original
part. Unauthorized substitutions may result in re, electric shock
or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask
the service technician to perform safety checks to determine that
the equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualied service person and
should conform to all local codes.
17. Correct Batteries
Warning: Risk of explosion if battery is replaced by an incorrect
type. Replace only with the same or equivalent type. Dispose of
used batteries according to the instructions. The battery shall not
be exposed to excessive heat such as sunshine, re or the like.
18. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specied so that the customer
and installer may determine a suitable maximum operating
environment for the equipment.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards
English

3Network Camera
FCC Compliance Statement
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15
OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE, IN
WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE CAUSING EQUIPMENT REGULATIONS.
WEEE (Waste Electrical & Electronic Equipment)
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government oce,
for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
Safety Symbols
Symbol Publication Description
IEC60417, No.5031 Direct current
Copyright
© 2016 IDIS Co., Ltd.
IDIS Co., Ltd. reserves all rights concerning this document.
Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.
Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
Registered Trademarks
IDIS is a registered trademark of IDIS Co., Ltd.
Other company and product names are registered trademarks of their respective owners.
This product contains software built partially on open-source content. Codes for the corresponding open-source content are available
for download. For more information, refer to the software CD (OpenSourceGuide\OpenSourceGuide.pdf) or the open source guide
accompanying this document.
The information in this document is believed to be accurate as of the date of publication even though explanation about some
functions may not be incorporated. The manufacturer is not responsible for any problems resulting from the use thereof. The
information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to
incorporate such changes.
Warning: This product emits infrared light. Do not look into the IR LED.
English

4Quick Guide
Accessories
Upon purchasing the product, check inside the box to make sure
all the following accessories are included. Some parts may dier
depending on the situation.
Item
Network Camera
Open Source Guide
Quick Guide
Allen wrench ( DC-D3233HRX / DC-D3233WRX models only)
Screws (3 ea.)
Desiccant ( DC-D3233HRX / DC-D3233WRX models only)
CVBS Cable
Guide Pattern
Overview
• Product color and design may vary depending
on the model.
• For more details on each part name, refer to
the manual.
Dome Cover
Top
DC-D3233HRX / DC-D3233WRX
1
DC-D3233RX / DC-D3233X
2
Bottom
DC-D3233HRX / DC-D3233WRX
3
4
44
5
DC-D3233RX / DC-D3233X
5
55
English

5Network Camera
1Dome Cover Screw Hole
2Dome Cover Removal Groove
3Safety Wire
4Dome Cover Screws
5Dome Cover Assembly Notch
Body
DC-D3233HRX / DC-D3233WRX
5
3
4
1
2
5
3
4
1
2
$
6
7
8
9
!
#
@
0
DC-D3233RX / DC-D3233X
5
3
4
1
2
$
6
7
8
#
!@
#
0%
%
1Lens 9Dome Cover Screw
Hole
2IR LED 0SD Memory Card Slot
Cover
3Factory Reset Button !Side Cable Access
Hole
4SD Memory Card Slot @Bottom Cover
5Video Out #Wall/Ceiling
Installation Hole
6Lens Rotator $Rotator Screw
7Horizontal Rotator %Dome Cover
Assembly Hook
8Lens Rotator Handle
English

6Quick Guide
I/O Device Port
1
2
3
4
1Network Port
2Power
3Audio I/O
4Alarm I/O
Camera Installation
Removing the Dome Cover
DC-D3233HRX / DC-D3233WRX
1 Loosen the screws counterclockwise using the
allen wrench.
2 Remove the dome cover.
DC-D3233RX / DC-D3233X
1 Insert a at-head screwdriver into the groove
indicated by the triangle mark on the dome cover,
and push down the screwdriver.
English

7Network Camera
2 Remove the dome cover.
Inserting a SD Memory Card
microSD Logo is a trademark of
SD-3C, LLC.
DC-D3233HRX / DC-D3233WRX
1 Pull the hook and lift the cover to remove it.
1
2
2 Insert a SD memory card into the SD memory card
slot with the ‘micro SD’print facing upward.
micro
SD
Push the SD memory card until it disengages
from the slot, and then pull it out.
DC-D3233RX / DC-D3233X
1 Pull the hook and lift the cover to remove it.
1
2
2 Insert a SD memory card into the SD memory card
slot with the ‘micro SD’print facing upward.
micro
SD
Push the SD memory card until it disengages
from the slot, and then pull it out.
English

8Quick Guide
Installation
Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall o if the wall or
ceiling is not strong enough to support its weight.
DC-D3233HRX / DC-D3233WRX
1 Pull the hook and lift the cover to remove it.
1
2
2 Attach the enclosed desiccant in the SD memory
card slot cover to prevent moisture.
Desiccant
3 Use the screws, anchor provided with the camera
to secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screws.
4 Connect external devices, the network cable, and
the power adapter.
Make sure that the side cable hole is shut
using the cable cap for waterproof if the
hole is not used.
5 Adjust the angle. For more information, refer to
the Angle Adjustment.
English

9Network Camera
DC-D3233RX / DC-D3233X
1 Use the screws, anchor provided with the camera
to secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screws.
2 Connect external devices, the network cable, and
the power adapter.
3 Adjust the angle. For more information, refer to
the Angle Adjustment.
Closing the Dome Cover
DC-D3233HRX / DC-D3233WRX
1 Attach the dome cover to the bottom cover. Match
the dome cover assembly notch to the wall/ceiling
installation hole of the camera body.
2 Fasten the screws for the dome cover clockwise
using the allen wrench.
English

10 Quick Guide
•DirectIP NVR makes it easy to use cameras without extra network congurations.
Each camera can be controlled via the DirectIP™ NVR setup menu, without any PC.
– For detailed camera settings, please see the camera setting pages of DirectIP™ NVR manual.
•To use your camera with non-DirectIP system (e.g. other NVR or VMS), refer to the camera
manual and it can be downloaded from our website: www.idisglobal.com.
DC-D3233RX / DC-D3233X
Attach the dome cover to the bottom cover. Press the
area where the triangular mark meets the dome cover
assembly hook to assemble the dome cover.
Angle Adjustment
3
2
1
1Lens Rotation 3Horizontal Rotation
2Vertical Rotation
English

11
Specications
Vandal Resistance Yes ( DC-D3233HRX / DC-D3233WRX only)
Out-door Ready IP66 ( DC-D3233HRX / DC-D3233WRX only), Heater ( DC-D3233HRX only)
Operating
Temperature
DC-D3233HRX -40°C ~ +50°C (-40°F ~ +122°F)
DC-D3233WRX /
DC-D3233RX /
DC-D3233X
-10°C ~ +50°C (+14°F ~ +122°F)
Boot Up
Temperature
DC-D3233HRX -20°C ~ +50˚C (-4°F ~ +122˚F)
DC-D3233WRX /
DC-D3233RX /
DC-D3233X
0°C ~ +50˚C (+32°F ~ +122˚F)
Operating Humidity 0% ~ 90%
Power Source DC-D3233HRX /
DC-D3233WRX /
DC-D3233RX
12V , PoE(IEEE 802.3af, Class3)
DC-D3233X
12V , PoE(IEEE 802.3af, Class2)
Power
Consumption
DC-D3233HRX
Max. 11.7W
DC-D3233WRX /
DC-D3233RX
Max. 7.5W
DC-D3233X
Max. 6.0W
Approval FCC, CE
External
Dimensions (Ø x H)
DC-D3233HRX /
DC-D3233WRX
155mm x 111.5mm (6.11" x 4.39")
DC-D3233RX /
DC-D3233X
155mm x 111.5mm (6.11" x 4.39")
Weight (Main Unit) DC-D3233HRX /
DC-D3233WRX
0.9kg (1.98lb)
DC-D3233RX /
DC-D3233X
0.9kg (1.98lb)
V1.1
English

IDIS Co., Ltd.
For more information, please visit
www.idisglobal.com