IEI Technology KINO-6614 User manual

KINO-6614 Motherboard
1
KINO-6614 Motherboard User Manual

REVISION HISTORY
Title KINO-6614 Intel Pentium 4 Motherboard
Revision Number Description Date of Issue
1.0 Initial release November 2006
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event is the manufacturer liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
IBM PC is a registered trademark of International Business Machines Corporation. INTEL
is a registered trademark of INTEL Corporation. AMI is registered trademarks of American
Megatrends Inc. Other product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
IEI®Technology, Corp.
2

KINO-6614 Motherboard
3
Table of Contents
1INTRODUCTION................................................................................................... 15
1.1 KINO-6614 OVERVIEW........................................................................................... 16
1.1.1 KINO-6614 Benefits......................................................................................... 16
1.1.2 KINO-6614 Features........................................................................................ 16
1.2 KINO-6614 BOARD OVERVIEW............................................................................... 17
1.2.1 KINO-6614 Connectors................................................................................... 17
1.2.2 Technical Specifications................................................................................... 18
2DETAILED SPECIFICATIONS ........................................................................... 21
2.1 OVERVIEW ............................................................................................................... 22
2.2 CPU SUPPORT.......................................................................................................... 22
2.2.1 Intel®Pentium®4 ............................................................................................ 22
2.2.2 Intel®Celeron®D............................................................................................ 22
2.3 ON-BOARD CHIPSET................................................................................................. 23
2.3.1 Northbridge and Southbridge Chipsets ........................................................... 23
2.3.2 SiS661CX Northbridge Chipset ....................................................................... 23
2.3.3 SiS966 Southbridge Chipset............................................................................. 24
2.4 DATA FLOW.............................................................................................................. 25
2.5 GRAPHICS SUPPORT ................................................................................................. 26
2.6 MEMORY SUPPORT................................................................................................... 26
2.7 PCI BUS INTERFACE SUPPORT ................................................................................. 26
2.8 GBE ETHERNET ....................................................................................................... 26
2.9 DRIVE INTERFACES .................................................................................................. 27
2.9.1 IDE Interfaces.................................................................................................. 27
2.9.2 SATA Drives ..................................................................................................... 27
2.10 SERIAL PORTS ........................................................................................................ 27
2.11 INFRARED DATA ASSOCIATION (IRDA) INTERFACE ................................................ 28
2.12 USB INTERFACES................................................................................................... 28
2.13 PCI INTERFACES .................................................................................................... 28
2.14 BIOS ..................................................................................................................... 28
2.15 OPERATING TEMPERATURE AND TEMPERATURE CONTROL..................................... 28
2.16 AUDIO CODEC........................................................................................................ 29

2.17 POWER CONSUMPTION........................................................................................... 30
2.18 PACKAGED CONTENTS AND OPTIONALACCESSORY ITEMS..................................... 30
2.18.1 Package Contents........................................................................................... 30
2.18.2 Optional Accessory Items............................................................................... 30
3CONNECTORS AND JUMPERS......................................................................... 33
3.1 PERIPHERAL INTERFACE CONNECTORS .................................................................... 34
3.1.1 KINO-6614 Layout........................................................................................... 34
3.1.2 Peripheral Interface Connectors ..................................................................... 35
3.1.3 Rear Panel Connectors.................................................................................... 36
3.1.4 On-board Jumpers ........................................................................................... 36
3.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 37
3.2.1 ATX Power Connector ..................................................................................... 37
3.2.2 CPU Power Connector.................................................................................... 38
3.2.3 Digital Input/Output Connector....................................................................... 39
3.2.4 Fan Connectors................................................................................................ 39
3.2.5 Front Panel Connector .................................................................................... 40
3.2.6 IDE Connectors ............................................................................................... 41
3.2.7 IrDA Infrared Interface Connector.................................................................. 43
3.2.8 Serial Port Connector...................................................................................... 44
3.2.9 SATA Drive Connectors ................................................................................... 45
3.2.10 SMBus Connector .......................................................................................... 46
3.2.11 Internal USB Connectors............................................................................... 47
3.3 EXTERNAL INTERFACE CONNECTORS....................................................................... 48
3.3.1 Audio Connectors............................................................................................. 49
3.3.2 Ethernet Connectors ........................................................................................ 50
3.3.3 USB Connectors............................................................................................... 51
3.3.4 Keyboard/Mouse Connector ............................................................................ 52
3.3.5 Serial Port Connectors .................................................................................... 53
3.3.6 VGA Connector................................................................................................ 54
3.3.7 Parallel Connector........................................................................................... 54
4INSTALLATION AND CONFIGURATION ....................................................... 57
4.1 ANTI-STATIC PRECAUTIONS...................................................................................... 58
4.2 INSTALLATION CONSIDERATIONS ............................................................................. 58
4.2.1 Installation Notices.......................................................................................... 58
4.3 UNPACKING.............................................................................................................. 59
IEI®Technology, Corp.
4

KINO-6614 Motherboard
5
4.3.1 Unpacking Precautions.................................................................................... 59
4.3.2 Checklist........................................................................................................... 60
4.4 KINO-6614 MOTHERBOARD INSTALLATION ............................................................ 60
4.5 SOCKET LGA775 CPU INSTALLATION .................................................................... 61
4.5.1 CPU Selection: HT Functionality Requirements............................................. 61
4.5.1.1 CPU Installation........................................................................................ 61
4.5.2 Socket LGA775 Cooling Kit Installation ......................................................... 64
4.5.3 DIMM Module Installation.............................................................................. 66
4.5.3.1 Purchasing the Memory Module............................................................... 66
4.5.3.2 DIMM Module Installation....................................................................... 67
4.5.4 Peripheral Device Connection......................................................................... 68
4.5.4.1 IDE Disk Drive Connector........................................................................ 69
4.5.4.2 COM Port Connectors............................................................................... 70
4.5.5 SATA (Serial ATA) Connection......................................................................... 70
4.5.6 USB Port Installation....................................................................................... 71
4.6 ON-BOARD JUMPERS................................................................................................ 72
4.6.1 Clear CMOS Jumper........................................................................................ 72
4.7 CHASSIS INSTALLATION ........................................................................................... 73
4.8 REAR PANEL CONNECTORS ...................................................................................... 74
4.8.1 CRT Connection............................................................................................... 74
4.8.2 Ethernet Connection ........................................................................................ 74
4.8.3 USB Connection............................................................................................... 74
4.8.4 Serial Connection............................................................................................. 74
4.8.5 Keyboard and Mouse Connection.................................................................... 74
4.8.6 Audio Interface................................................................................................. 74
5AMI BIOS SETUP.................................................................................................. 76
5.1 INTRODUCTION ........................................................................................................ 77
5.1.1 Starting Setup................................................................................................... 77
5.1.2 Using Setup...................................................................................................... 77
5.1.3 Getting Help..................................................................................................... 78
5.1.4 Unable to Reboot after Configuration Changes.............................................. 78
5.1.5 BIOS Menu Bar................................................................................................ 78
5.2 MAIN ....................................................................................................................... 78
5.3 ADVANCED............................................................................................................... 80
5.3.1 CPU Configuration.......................................................................................... 81

5.3.2 IDE Configuration........................................................................................... 83
5.3.2.1 IDE Master, IDE Slave ............................................................................. 86
5.3.3 Floppy Configuration....................................................................................... 91
5.3.4 Super IO Configuration.................................................................................... 92
5.3.5 Hardware Health Configuration...................................................................... 95
5.3.6 ACPI Configuration ......................................................................................... 96
5.3.6.1 Advanced ACPI Configuration ................................................................. 97
5.3.7 MPS Configuration .......................................................................................... 98
5.3.8 USB Configuration........................................................................................... 99
5.3.8.1 USB Mass Storage Device Configuration............................................... 102
5.4 PCI/PNP ................................................................................................................ 104
5.5 BOOT ..................................................................................................................... 109
5.5.1 Boot Settings Configuration........................................................................... 109
5.5.2 Boot Device Priority.......................................................................................113
5.5.3 Hard Disk Drives ............................................................................................113
5.5.4 Removable Drives...........................................................................................114
5.5.5 CD/DVD Drives..............................................................................................115
5.6 SECURITY................................................................................................................116
5.7 CHIPSET ..................................................................................................................117
5.7.1 North Bridge Configuration............................................................................118
5.7.2 SouthBridge SiS966 Configuration.................................................................119
5.8 POWER KEY ........................................................................................................... 121
5.9 EXIT....................................................................................................................... 123
6SOFTWARE DRIVERS....................................................................................... 127
6.1 AVAILABLE SOFTWARE DRIVERS ............................................................................ 128
6.2 VGA DRIVER INSTALLATION ................................................................................. 129
6.3 AUDIO DRIVER INSTALLATION ............................................................................... 135
6.4 LAN DRIVER INSTALLATION ................................................................................. 140
6.5 SIS SATA RAID UTILITY INSTALLATION .............................................................. 144
ABIOS CONFIGURATION OPTIONS ................................................................ 154
A.1 BIOS CONFIGURATION OPTIONS........................................................................... 155
BWATCHDOG TIMER .......................................................................................... 159
CADDRESS MAPPING.......................................................................................... 162
C.1 IO ADDRESS MAP ................................................................................................. 163
IEI®Technology, Corp.
6

KINO-6614 Motherboard
7
C.2 1ST MB MEMORYADDRESS MAP ......................................................................... 163
C.3 IRQ MAPPING TABLE............................................................................................ 164
C.4 DMA CHANNELASSIGNMENTS............................................................................. 164
DEXTERNALAC’97 AUDIO CODEC................................................................. 166
D.1 INTRODUCTION ..................................................................................................... 167
D.1.1 Accessing the AC’97 CODEC....................................................................... 167
D.1.2 Driver Installation......................................................................................... 167
D.2 SOUND EFFECT CONFIGURATION........................................................................... 168
D.2.1 Accessing the Sound Effects Manager .......................................................... 168
D.2.2 Sound Effect Manager Configuration Options ............................................. 169
ERAID SETUP ........................................................................................................ 172
E.1 INTRODUCTION...................................................................................................... 173
E.1.1 RAID Support ................................................................................................ 173
E.1.2 What is RAID................................................................................................. 173
E.2 RAID SETUP ......................................................................................................... 173
E.2.1 Introduction ................................................................................................... 173
E.2.2 Install SATA Drives........................................................................................ 174
E.2.3 Configure the SATA Controller in BIOS........................................................ 174
E.2.4 Configure the RAID BIOS ............................................................................. 174
E.2.5 Install the OS................................................................................................. 179
FINDEX.................................................................................................................... 181

List of Figures
Figure 1-1: KINO-6614 Board Overview....................................................................17
Figure 2-1: Data Flow Block Diagram........................................................................25
Figure 3-1: Connector and Jumper Locations.........................................................34
Figure 3-2: Power Connector Location.....................................................................37
Figure 3-3: CPU 12V Power Connector Location.....................................................38
Figure 3-4: Digital I/O Connector Location...............................................................39
Figure 3-5: Fan Connector Locations .......................................................................40
Figure 3-6: Front Panel Connector Location............................................................41
Figure 3-7: IDE Device Connector Location.............................................................42
Figure 3-8: IR Connector Location............................................................................44
Figure 3-9: Serial Port Connector Location..............................................................45
Figure 3-10: SATA Drive Connector Locations........................................................46
Figure 3-11: SMBus Connector Location..................................................................47
Figure 3-12: Internal USB Connector Locations......................................................48
Figure 3-13: KINO-6614 External Interface Connectors..........................................49
Figure 3-14: Audio Connector....................................................................................49
Figure 3-15: RJ-45 Ethernet Connector ....................................................................50
Figure 3-16: Ethernet Connector and USB Ports Pinout Locations ......................51
Figure 3-17: PS/2 Pinouts...........................................................................................52
Figure 3-18: External Serial Port Connector ............................................................53
Figure 3-19: VGA Connector......................................................................................54
Figure 3-20: Parallel Connector Pinout Locations...................................................55
Figure 4-1: Intel LGA775 Socket................................................................................62
Figure 4-2: Remove the CPU Socket Protective Shield...........................................63
Figure 4-3: Open the CPU Socket Load Plate ..........................................................63
Figure 4-4: Insert the Socket LGA775 CPU ..............................................................64
Figure 4-5: IEI LGA-775 Cooling Kit ..........................................................................65
Figure 4-6: Securing the Heat sink to the PCB Board.............................................66
Figure 4-7: Installing the DIMM Module ....................................................................67
IEI®Technology, Corp.
8

KINO-6614 Motherboard
9
Figure 4-8: Locking the DIMM Module ......................................................................68
Figure 4-9: Connection of IDE Connector ................................................................69
Figure 4-10: Connection of SATA Connector...........................................................71
Figure 4-11: Connection of a USB Connector..........................................................71
Figure 4-12 Jumper.....................................................................................................72
Figure 4-13: Jumper Location....................................................................................73
Figure 6-1: SIS Solution CD Main Menu................................................................. 129
Figure 6-2: CD VGA Folder...................................................................................... 130
Figure 6-3: CD VGA\3.76logo Folder...................................................................... 130
Figure 6-4: Starting InstallShield Wizard Screen.................................................. 131
Figure 6-5: Preparing Setup Screen....................................................................... 131
Figure 6-6: VGA Utilities Welcome Screen............................................................ 132
Figure 6-7: Select Setup Installation Type............................................................. 133
Figure 6-8: Select Folders to Copy Files................................................................ 133
Figure 6-9: Review Settings .................................................................................... 134
Figure 6-10: Read ReadMe File............................................................................... 134
Figure 6-11: Restart the Computer......................................................................... 135
Figure 6-12: CD 4-Audio\AC97\Windows Folder................................................... 136
Figure 6-13: Audio Driver Install Shield Wizard Starting ..................................... 136
Figure 6-14: Audio Driver Setup Preparation........................................................ 137
Figure 6-15: Audio Driver Welcome Screen .......................................................... 137
Figure 6-16: Audio Driver Software Configuration............................................... 138
Figure 6-17: Audio Driver Digital Signal ................................................................ 138
Figure 6-18: Audio Driver Installation Begins....................................................... 139
Figure 6-19: Audio Driver Installation Complete................................................... 139
Figure 6-20: Access Windows Control Panel........................................................ 140
Figure 6-21: Double Click the System Icon ........................................................... 141
Figure 6-22: Double Click the Device Manager Tab.............................................. 141
Figure 6-23: Device Manager List........................................................................... 142
Figure 6-24: Search for Suitable Driver.................................................................. 142
Figure 6-25: Locate Driver Files.............................................................................. 143
Figure 6-26: Location Browsing Window............................................................... 143
Figure 6-27: CD 6-SATA RAID\Windows Folder.................................................... 144

Figure 6-28: Starting Install Shield Wizard............................................................ 145
Figure 6-29: Preparing Setup.................................................................................. 145
Figure 6-30: Install Shield........................................................................................ 146
Figure 6-31: License Agreement............................................................................. 147
Figure 6-32: Install Application Directory.............................................................. 148
Figure 6-33: Select Needed Components.............................................................. 149
Figure 6-34: Ready to Install................................................................................... 150
Figure 6-35: Setup Status........................................................................................ 151
Figure 6-36: Restart the Computer......................................................................... 152
IEI®Technology, Corp.
10

KINO-6614 Motherboard
11
List of Tables
Table 1-1: Technical Specifications ..........................................................................19
Table-2-1: Supported CPUs........................................................................................22
Table 2-2: Power Consumption .................................................................................30
Table 3-1: Peripheral Interface Connectors..............................................................36
Table 3-2: Rear Panel Connectors.............................................................................36
Table 3-3: On-board Jumper......................................................................................36
Table 3-4: Power Connector Pinouts ........................................................................38
Table 3-5: CPU 12V Power Connector Pinouts........................................................38
Table 3-6: Digital I/O Connector Pinouts ..................................................................39
Table 3-7: System Fan Connector Pinouts...............................................................40
Table 3-8: Front Panel Connector Pinouts...............................................................41
Table 3-9: IDE Connector Pinouts.............................................................................43
Table 3-10: IR Connector Pinouts..............................................................................44
Table 3-11: Serial Port Connector Pinouts...............................................................45
Table 3-12: SATA Drive Connector Pinouts .............................................................46
Table 3-13: SMBus Connector Pinouts.....................................................................47
Table 3-14: Internal USB Connector Pinouts ...........................................................48
Table 3-15: Ethernet Connector Pinouts...................................................................50
Table 3-16: RJ-45 Ethernet Connector LEDs............................................................51
Table 3-17: External USB Connector Pinouts..........................................................51
Table 3-18: Keyboard Connector Pinouts ................................................................52
Table 3-19: Mouse Connector Pinouts......................................................................53
Table 3-20: External Serial Port Pinouts...................................................................53
Table 3-21: VGA Connector Pinouts .........................................................................54
Table 3-22: Parallel Connector Pinouts ....................................................................55
Table 4-1: IEI Provided Cables...................................................................................68
Table 4-2: Clear CMOS Jumper Settings..................................................................73
Table 5-1: BIOS Navigation Keys...............................................................................78

List of BIOS Menus
BIOS Menu 1: Main......................................................................................................79
BIOS Menu 2: Advanced.............................................................................................81
BIOS Menu 3: CPU Configuration..............................................................................82
BIOS Menu 4: IDE Configuration...............................................................................83
BIOS Menu 5: IDE Master and IDE Slave Configuration..........................................87
BIOS Menu 6: Floppy Configuration .........................................................................91
BIOS Menu 7: Super IO Configuration......................................................................92
BIOS Menu 8: Hardware Health Configuration.........................................................95
BIOS Menu 9: ACPI Configuration.............................................................................96
BIOS Menu 10: Advanced ACPI Configuration ........................................................97
BIOS Menu 11: MPS Configuration ...........................................................................99
BIOS Menu 12: USB Configuration......................................................................... 100
BIOS Menu 13: USB Mass Storage Device Configuration.................................... 102
BIOS Menu 14: PCI/PnP Configuration.................................................................. 104
BIOS Menu 15: Boot................................................................................................. 109
BIOS Menu 16: Boot Settings Configuration......................................................... 110
BIOS Menu 17: Boot Device Priority Settings....................................................... 113
BIOS Menu 18: Removable Drives.......................................................................... 115
BIOS Menu 19: Security........................................................................................... 116
BIOS Menu 20: Chipset............................................................................................ 117
BIOS Menu 21:NorthBridge Chipset Configuration.............................................. 118
BIOS Menu 22: SouthBridge Chipset Configuration............................................ 120
BIOS Menu 23: Power.............................................................................................. 122
BIOS Menu 24:Exit ................................................................................................... 124
IEI®Technology, Corp.
12

KINO-6614 Motherboard
Glossary
AC ’97 Audio Codec 97
ACPI Advanced Configuration and
Power Interface
APM Advanced Power Management
ARMD ATAPI Removable Media Device
ASKIR Shift Keyed Infrared
ATA Advanced Technology
Attachments
BIOS Basic Input/Output System
CFII Compact Flash Type 2
CMOS Complementary Metal Oxide
Semiconductor
CPU Central Processing Unit
Codec Compressor/Decompressor
COM Serial Port
DAC Digital to Analog Converter
DDR Double Data Rate
DIMM Dual Inline Memory Module
DIO Digital Input/Output
DMA Direct Memory Access
EIDE Enhanced IDE
EIST Enhanced Intel SpeedStep
Technology
FDD Floppy Disk Drive
FDC Floppy Disk Connector
FFIO Flexible File Input/Output
FIFO First In/First Out
FSB Front Side Bus
IrDA Infrared Data Association
HDD Hard Disk Drive
IDE Integrated Data Electronics
I/O Input/Output
ICH4 I/O Controller Hub 4
L1 Cache Level 1 Cache
L2 Cache Level 2 Cache
LCD Liquid Crystal Display
LPT Parallel Port Connector
LVDS Low Voltage Differential Signaling
MAC Media Access Controller
OS Operating System
PCI Peripheral Connect Interface
PIO Programmed Input Output
PnP Plug and Play
POST Power On Self Test
RAM Random Access Memory
SATA Serial ATA
S.M.A.R.T Self Monitoring Analysis and
Reporting Technology
SPD Serial Presence Detect
S/PDI Sony/Philips Digital Interface
SDRAM Synchronous Dynamic Random
Access Memory
SIR Serial Infrared
UART Universal Asynchronous
Receiver-transmitter
USB Universal Serial Bus
VGA Video Graphics Adapter
13

KINO-6614 Motherboard
THIS PAGE IS INTENTIONALLY LEFT BLANK
14
IEI®Technology, Corp.

KINO-6614 Motherboard
Chapter
1
1 Introduction
15

KINO-6614 Motherboard
1.1 KINO-6614 Overview
The Mini-ITX form factor KINO-6614 with Pentium 4 / Celeron D CPU platform is fully
equipped with latest technology and advanced multi-mode I/Os. The KINO-6614 is
designed for system manufacturers, integrators, and VARs that want performance,
reliability, and quality at a reasonable price.
1.1.1 KINO-6614 Benefits
The KINO form factor KINO-6614 motherboard defines a new industry open standard for
small form factor embedded computer boards. Some of the KINO-6614 motherboard
benefits are:
 Allowing additional space to support advanced processors and technologies
 Supporting complex I/O functions for industrial, medical, military,
transportation, and commercial applications
1.1.2 KINO-6614 Features
Some of the KINO-6614 features are listed below:
 Complies with RoHS
 Supports Intel® Pentium 4 / Celeron D CPUs
 Supports a maximum front side bus (FSB) speed up to 800MHz
 Supports up to 2GB of 400MHz or 333MHz of DDR memory
 Comes with two high performance gigabit Ethernet (GbE) controller
 Supports four SATA channels with transfer rates up to 1.5Gb/s
 Supports eight USB 2.0 devices
16
IEI®Technology, Corp.

KINO-6614 Motherboard
1.2 KINO-6614 Board Overview
Figure 1-1: KINO-6614 Board Overview
1.2.1 KINO-6614 Connectors
The KINO-6614 has the following connectors on-board:
 1 xATX power connector
 1 x CPU power connector
 2 x DDR DIMM sockets
 1 x Digital I/O connector
 2 x Fan connectors
 1 x Front panel connector
 2 x IDE Interface connectors
 1 x IrDAinterface connector
17

KINO-6614 Motherboard
 1 x PCI slot
 4 x SATA connectors
 1 x Serial port connector
 1 x SMBus connector
 2 x USB connectors
The KINO-6614 has the following connectors on the board rear panel:
 2 xAudio jacks
 1 x CRT connector
 2 x Ethernet connectors
 2 x Keyboard/Mouse connectors
 1 x Parallel port connector
 1 x Serial port connectors
 4 x USB 2.0 ports
The KINO-6614 has the following on-board jumper:
 Clear CMOS
The location of these connectors on the motherboard can be seen in Figure 1-1. These
connectors are fully described in Chapter 3.
1.2.2 Technical Specifications
KINO-6614 technical specifications are listed in Table 1-1. Detailed descriptions of each
specification can be found in Chapter 2 Detailed Specifications.
SPECIFICATION
CPUs Supported Intel®Pentium®4 / Celeron®D support 533/800MHz FSB up
to 3.4GHz
Chipset Northbridge: SiS 661CX
Southbridge: SiS966
I/O Controller SiS966
Graphics Support SiS Mirage™ Graphic Engine
18
IEI®Technology, Corp.

KINO-6614 Motherboard
Display VGA
Memory Dual channel DDR 400/333MHz memory modules (Max. 2GB)
PCI Bus Interface 33MHz, Revision 2.3
Serial ATA (SATA) Four SATAconnectors with 1.5Gb/s transfer rates
HDD Interface Two IDE channels support four Ultra ATA 100 devices
USB Interfaces Eight USB 2.0 connectors supported
Serial Ports Two COM ports
Extension One PCI port
Super I/O W83697 HG
IrDA By super I/O
Digital I/O 8 bit digital IO, 4 input / 4 output by super I/O
Audio Realtek ALC655 with Audio Codec ’97 (AC’97) version 2.3
Ethernet Dual Broadcom BCM5787 for PCI Express GbE
BIOS AMI BIOS Label
Power Support +5V/-5V, +12V/-12V, +3.3V/-3.3V; ATX power
Physical Dimensions 170mm x 170mm (width x length)
Operating
Temperature
Minimum: 0ºC (32°F)
Maximum: 60°C (140°F)
Table 1-1: Technical Specifications
19

KINO-6614 Motherboard
THIS PAGE IS INTENTIONALLY LEFT BLANK
20
IEI®Technology, Corp.