iGear Retractor User manual

Model No.: iG-BT019
Retractor
Wireless Voice Assist

1
For user’s safety, please read this manual before using
the Headphone
The following matters should be paid attention to
when using headphones:
The headphones should not be stored or used in
temperature below 150C (50F) or higher than 550C
(1310F), otherwise will reduce headphones or
battery life.
1. Avoid the use of high volume as it may lead to
hearing damage.
2. Avoide using it for a longer period of time.
3. Using headphone while driving is not
recommended.
4. Clean the headphones using a dry, soft, clean cloth.

Please charge only with original charging cable.
1. Turn off the headset before charging.
2. Insert the USB charging cable to earpiece jack. The
headphones red light flashing means it is charging.
3. The headset needs about 2 hours to get fully charged
Warning:
Charging port
Volume-/Previous
Volume+/Next
On/Off
LED indicator
Multifunctional Button
2

•Headset 1pc
•USB charging cable 1pc
•Earbud 3pcs
•User Manual 1pc
3
■Package content
ON/OFF
1. Push “ON”, the headset will prompt for “Power
ON” with vibration; if red and blue light flashing
alternately means it’s ready for pairing with your
device.
2. Switch to OFF to turn off the headset, it will
prompt “Power OFF”.
Earbud
Retract Button (L)
Earbud
Retract Button (R)
Microphone

4
Bluetooth connection steps:
1. Please keep your headset and mobile phone as
close as you can, within 1 meter.
2. Switch to “ON”, it will prompt “pairing” after 5
seconds, and then red and blue lights flashing
alternately when headset is on and ready for
pairing.
3. Turn on “Bluetooth” in setting (your device) and
find headset’s Bluetooth name BT-109.
4. Click BT-019, Bluetooth headset gets connected
with your mobile phone automatically. (some may
require pass code which is 0000)
Pair the headset with 2 mobile phones
1. After successfully paired with a mobile phone,
close the Bluetooth function of the mobile phone,
and switch the button of BT-019 to OFF.
2. Same procedure to get the 2nd mobile phone
paired with the Bluetooth headset.
3. Turn on the Bluetooth function of the 1st mobile
phone; choose “BT-019” to finish the pairing status
with the 2nd mobile phones.

5
Note:
1. With you previously paired device’s Bluetooth turned on
and in range, turn on BT-019. The headset will automatically
reconnect to the same Bluetooth device that connect last
time. If you have a previously paired device that dose not
auto-reconnected, navigate to the Bluetooth settings menu
on your device, turn on the Bluetooth feature, and select
“BT-019” from your list of paired Bluetooth devices.
2. Pairing time exceeds 3 minutes, BT-019 will automatically
shutdown ; in 3 minutes back to the effective distance can
automatically return to the last connected device.
3. P.S.: If connected with two mobile phones, only mobile
phone 1 supports wireless music and you can start
conversation for both mobile phones. Battery check up
through iPhone.
Answer & End call / Incoming call vibration remind
Answer phone call
When there is incoming call, there will be a vice
prompt, like “incoming call 134….2578 (phone number
will be broadcasted)”. Click MFB to answer, or just
operate your mobile phone.
End Call:
Press the multifunction button to hang up call, or by
direct hang up your phone call.
Reject call:
When there is incoming call, headphone will
broadcast “incoming call” with vibration, double click
MFB to reject, or just reject it on your mobile phone
Last number redial: Double click MFB.

6
Call Transfer:
Double click the volume “__” when calling to have call
transfer between phone and headset.
EQ Shift:
Double click the volume “__” when playing music to
have different sound effect (low bass boost, normal,
high pitch boost). Default setting is low bass boost.
Choose your favorite sound effect base on your habit
and music style.
Power prompt:
Each time turning on BT-019, it will report headset
battery power remaining, such as “Battery full”,
“battery level high”, “battery level medium”, “battery
level low”, “recharge headset”.
Voice Dial:
Unlock the mobile phone and double click the
volume “+” to launch the voice dial, and then just
speak the people name you want to call. This function
can work only if your mobile phone support it.

7
Play/Pause/Tracks
During music playing, single click MFB to pause
music, and click again MFB to play it again.
During music playing, single click “+/-” to change
songs.
During the call or listening to music, user can long
press “+” or “-” button to adjust the volume.
Mobile phone anti-lost indicator
When the Headphone is connected to the smart
phone, if the distance between the device and the
headphone is more than 20 m, headphone will
prompt "Beyond the range of connection". If coming
back to the working distance within 10 mins, the
prompt will go off and the devices reconnect
automatically. If not coming back to the working
distance in 10 min, the headphone will power off.
Please switch the button to OFF and then switch to
On, to turn the power on, and then headphone will be
back to work.
Restore Factory Settings
Long press the MFB while charging unite the blue
light flashes 3 times.

8A1
■Technical index
•Correpond with: Bluetooth CSR 4.0
•Support: HSP. HFP. A2DP. AVRCP
•Transmitting Power: Class 2
•Working distance: ≤10m
•Frequency range: 2.4026GHz-2.480GHz
•Charging time: ≤3.5 hours
•Talk time: ≥18 hours
•Music time: ≥16 hours
•Standby time: ≥300 hours
•Weight: 67g

Imported and Marketed By:
iGear Tech Pvt. Ltd.
204, Sai Corporate Park, Laxmi Nagar, Off Link Road,
Goregaon West, Mumbai - 400104.
Manufactured by: Panorama Tech (HK) Co. Ltd., China
Name of Commodity: Retractor(iG-BT019)
Month and Year of Import: June, 2019
Music Time: ≥ 16 hours
Standby Time: ≥ 300 hours
Pairing for 2 mobiles phones Battery: 300 mAh
Net Weight: 70gm
Net Quantity: 1 Unit
Voltage: 5V
In case of consumer complaints:
Toll free number - 1800 22 8495,
Email: [email protected]
(Between 10am to 5pm, Mon- Fri)