iGear Camo iG-1021 User manual

Camo
Playing the mood
Model No.: iG-1021

Charging cable: 1 piece;
Belt: 1 piece;
Wireless version: 5.0
Speaker driver unit size: 4 INCH
Output power: 5W
Frequency response: 100Hz-20KHz
Signal to noise ratio: >=85dB
FM scan range: 87.5-108.0Mhz
Wireless range: 10 meter
Max memory USB/SD: 32GB
USB charging: DC 5V
Battery capacity: 1200mAh
Backup time via wireless mode: Approx 1.5-2 hours at max volume
Backup time via USB mode: Approx 1.5-2 hours at max volume
Charging via USB port (PC): 2-3 hours charging time
Turn on the unit and switch on your mobile Bluetooth, then
search for the name 'iGear Camo' and pair the device.
Once device is paired, Bluetooth will automatically connect
when unit is turned on subsequently.
ACCESSORIES
CONNECT TO BLUETOOTH DEVICE
SPECIFICATIONS

1. POWER OFF/ON: To turn ON/OFF the speaker.
2. DC 5V: Plug the Micro USB cable to the speaker and connect other end
USB port to the power source. (DC 5V) - AUX: Aux-in jack.
3. USB slot: Used to read the MP3 files in USB drive, maximum size
supported is 32GB.
4. TF slot: Used to read the MP3 file in TF/SD card, maximum size supported
is 32GB.
5. Play/Pause: Under USB/TF/Bluetooth mode, short press for play and pause.
6. M: To change mode during USB/TF, Bluetooth, FM and Aux-in mode.
7. PREV: USB/TF/Bluetooth/FM mode: Press to change to previous FM
channel/Track long press to decrease the volume.
8. NEXT: USB/TF/Bluetooth/FM mode: Press to change to next FM channel /
track. long press to increase the volume.
9. Torch
NOTE: If FM mode reception is not good, connect a Micro USB cable for
better FM reception.
1. Turn on both the speakers at the same time.
2. Choose one of them, on one of the speaker press and hold
the "M" button for a few seconds, then a notification sound will
indicate of pairing.
Note: TWS works in Bluetooth Mode only
TWS OPERATION:
Turn on the speaker, it come into the Bluetooth mode directly.
After pairing, the device can play music. Short press to
Play/Pause, Short press or to surf through Prev or Next
track. Long press or to increase or decrease the volume.
BLUETOOTH

AUX-IN
USB / TF CARD
FM RADIO
Insert the AUX cable into AUX jack, and press ‘M’ to switch to
AUX-IN mode. Long press or to increase or decrease the
volume. In AUX mode, track cannot be changed using the
speaker buttons.
Insert the USB / TF card into the USB / TF slot. It will read the
MP3 format music automatically. Press to Play/Pause.
Short Press or to switch to Prev or Next Song.
Long press or to increase or decrease the volume.
Long press the Play/Pause button, it will search for the
available stations and save them automatically.
Once the search is completed, Short press the or button
to switch between the saved stations.
Long press or to increase or decrease the volume.
NOTE: AUX Port connection can receive FM signal clearly as it
has the same function as the antenna.
CHARGING
Please use the original charging cable to charge. Red LED
display when on charging.