Iget Home GW6 User manual

Gateway GW6
User Guide - EN

Product lntroduction
This in-wall smart control panel adopts the Android platform,it mainly
provides gateway functions and scene mode functions. By installing it
in the wall electrical box at the user's home, users can manage their
smart home devices through the screen touch or moblie APP iGET
HOME control.
Appearance

Interface and Ports

lnstallation Preparations
1) This product is powered by the neutral wire and live wire, please
well arrange neutral wire in advance.
2) This product connects to the network via Wi-Fi, please set up the
Wi-Fi network in advance.
3) Please prepare your own tools such as screwdriver electrictester,
electrical tape and so on.
4) To ensure electricity safety and wirelesspertormance,pleaseuse
plasticwall electrical box instead of the metallic.
5) Please do not operate it under electricity.
Safety Notes
This product must be installed by professional electricians.
Turn off the main power in the electricitybox and make sure the live
wire is not alive with a test pencil.
This product should be kept away from fire and water during
installation and use.
This product can not be used in moisture circumstances such as
bathroom.

lnstallation instructions
Turn off the main power in the electricity box and make sure the live
wire in wall electrical box is not alive with a test pencil.
Remove the base of the smart switch and install it in the wall box
(shown in the pictures following).

lnstallation instructions
Wires connection instructions
Note: Make sure the circuit power were cut off before wires
connections!

lnstallation instructions
Check the wires and make sure the wires are in good contact with
the terminals and no exposed cooper wires.
Fasten the base to the wall electrical box with mounting screws and
fix the smart switch back to the base.
Nole that the screws should not be fixed too tight during installation
in case any deformation or damage to the screen and hardware.
lf the smart switch GW6 is not flat after installation, do not press the
screen violently, please check the wall box and the base
nstallationat first.

Network Settings
1) Search for the iGET HOME APP from App store, Google Play, or scan
the QR code from the user manual to download and install App, if
you download and use it for the first time, please click the "Sign Up"
button to register an account, if you already have an account, click
the "Log ln" button.
2) After installing the product according to the installation guide, turn
on the power and wait for the product to start, and oonnect to the
network according to the instructions on the product screen.
3) Open the installed App and scan the QR code on product screen to
pair with the product. After successfully paired, operate as per the
lnstructions shown on the product screen. Confirming the QR Code
according to the actual display on product screen.
User Manual
Scenes Overview: Enter the "Gateway GW6" page of the App, add the
devices or scenes that need to be displayed on the screen, and confirm it
according to the actual interface of the APP.
Gateway function: Enter the "Gateway GW6" page of the App, add Zigbee
devices, and confirm it according to the actual interface of the APP.
Settings: Slide down at the top of the GW6 screen to find the setting
page.

Product Specifications
Product name
iGET HOME Gateway GW6
Product model
GW6
Input power
100~240 VAC, 50/60 Hz
Working temperature
0°C~+40°C
Working humidity
5%~90% RH (non-condensing)
Wireless Protocol
Wi-Fi, Bluetooth, Zigbee
Dimensions
86 x 86 x 36 mm
Net Weight
178 g
Packing List
•iGET HOME Gateway GW6
• User manual
• Mounting Screw 2x
App iGET HOME:
Google Play App Store

WarrantyRules
For household use: The given symbol (crossed-out wheeled bin)
on the product or at accompanying documents means that used
electrical and electronic products should not disposed of with
household waste. To ensure proper disposal of the product, hand
it over to a designated collection point, where it will be accepted
free of charge. The correct disposal of this product will help to save valuable
natural resources and prevent any potential negative impacts on the environment
and human health, which could otherwise be caused by inappropriate disposal of
wastes. For more details, please, contact your local authorities or the nearest
collection point. The improper disposal of this waste can be penalized in
accordance with national regulations. Information for users to disposal of electrical
and electronic devices (corporate and business use): For proper disposal of
electrical and electronic devices, ask for details from your dealer or distributor.
Information for users to disposal of electrical and electronic devices in other
countries outside.
EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the
countries of EU. For proper disposal of electrical and electronic devices, ask for
details from your authorities or dealer. All is expressed by the symbol of crossed-
out wheeled bin on product, packaging or in printed materials.
Set up the claim for warranty repair of device at your dealer. If you have technical
questions or problems, contact your dealer. Follow the rules for working with
electrical equipment. The user may not dismantle the device or replace any part of

this. Opening or removing the covers poses the risk of electric shock. In case of
incorrect reassembly and subsequent connection you are also exposed to electric
shock.
Declaration of Conformity:
Company INTELEK.CZ s.r.o. hereby declares that all GW6 devices are in compliance
with essential requirements and other relevant provisions of Directive
2014/53/EU. The full text of the EU Declaration of Conformity is available on this
website www.iget.eu.
The warranty period of the product is 24 months, unless stated otherwise.
This device can be used in the following countries bellow.
Italy - The conditions for using the WiFi network are described in the so-called
Electronic Communications Code
Norway - The 2.4 GHz limitation applies only to the area 20 km from colony of Ny-
Ålesund.
RoHS: The components used in the device meet the requirements on the
restriction of hazardous substances in electrical and electronic devices in
accordance with Directive 2011/65/EU. The RoHS declaration can be downloaded
from www. iget.eu.
Operation of radio equipment:
CZ: This radio equipment can be operated in the Czech
Republic under the General Authorizations VO-R / 1 / 05.2017-
2 and VO-R / 12 / 09.2010-12.
SK: This radio equipment can be operated under General Authorizations VPR -
07/2014, VPR - 02/2017 and VPR - 35/2012.

Producer / Exclusive importer of iGET products to EU: INTELEK.CZ s.r.o., Olivova
2096/4, Nové Město – Praha 1, CZ web: http://www.iget.eu
SUPPORT: http://www.iget.eu/helpdesk
Copyright© 2022 INTELEK.CZ s.r.o. All rights reserved.
Please read the instruction manual carefully before using the product