Ignition LED Colorwall 9x3W RGB User manual

LED Colorwall 9x3W RGB
U S E R M A N U A L
LED Colorwall 9x3W RGB
LED Colorwall 9x3W RGB

1. Safety instructions
................................
1.1.
FOR SAFE AND EFFICIENT OPERATION
2. Technical Information
................................
3. DMX Modes
................................
3.1. DMX Table
................................
4. Work with the Menu
................................
4.1. Menu Structure
................................
4.2. Description of Menu
................................
5. Master Slaver configuration
6. Sound to light
................................
7. Technical Data
................................
2 / 14
C O L O R W A L L
Table of contents
................................
................................
................................
FOR SAFE AND EFFICIENT OPERATION
................................
................................
................................
................................
................................
................................
................................................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................................................
................................
................................
................................................................
................................
................................
................................................................
...............................
C O L O R W A L L
................................
........................... 3
................................
............ 3
................................
...................... 4
................................
..... 4
................................
............................... 4
................................
......................... 6
................................
........................ 6
................................
............... 10
................................
........... 13
................................
. 13
...............................
13

1. Safety instructions
•This
device is suitable for indoor use only.
•
All modifications to the device
•
Repairs are to carry out by skilled personnel only.
•
Use only fuses of
•
Protect the unit from rain and humidity to avoid fire and electric shocks.
•
Make sure to unplug the power supply before opening the housing.
1.1.
FOR SAFE AND EFFICIENT OPERATION
Be careful
with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not p
ut it in a temperature bellow 32
Keep away from humidity, water and dust
Do not place the set in a location
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-
stable location
Select a level and stable
location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove th
do not open the cabinet by yourself, it might result a
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to ho
When not using the device
for an extended period of time
from the receptacle .
3 / 14
C O L O R W A L L
device is suitable for indoor use only.
All modifications to the device
will void the warranty.
Repairs are to carry out by skilled personnel only.
Use only fuses of
t
he same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing.
FOR SAFE AND EFFICIENT OPERATION
with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
ut it in a temperature bellow 32
°F / 0°C, or exceeding 131°F / 55°C.
Keep away from humidity, water and dust
Do not place the set in a location
with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
stable location
location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove th
e power plug soon, and contact
with an engineer for repairing,
do not open the cabinet by yourself, it might result a
danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to ho
for an extended period of time
,
be sure to disconnect the plug
C O L O R W A L L
he same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing.
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
with an engineer for repairing,
danger of electric shock.
Never pull the power cable to remove the plug from the receptacle, be sure to ho
ld the plug.
be sure to disconnect the plug

Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability
Make sure the
electrical connection is carried out
and mechanical connections have to be carried out according to the European safety
standards.
2.
Technical Information
- 9x3W 3in1 RGB
-
DMX Modes (1, 2, 5, 7 Channel)
-
Sound to light Mode via internal Microphone
-
Digitale Display for Ad
- Stand Alone Mode
3. DMX Modes
To use the DMX mode, please adjust the address as explained below at the Menu Structure.
You can ch
oose 1, 2, 5 or 7 Channel Mode to control the item via DMX.
3.1. DMX Table
DMX MODE
1 SL (1 Channel)
DMX MODE 2 SL (2 Channels)
4 / 14
C O L O R W A L L
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability
for any resulting defects or problems.
electrical connection is carried out
by qualified personnel
and mechanical connections have to be carried out according to the European safety
Technical Information
DMX Modes (1, 2, 5, 7 Channel)
Sound to light Mode via internal Microphone
Digitale Display for Ad
dressing and Set Up
To use the DMX mode, please adjust the address as explained below at the Menu Structure.
oose 1, 2, 5 or 7 Channel Mode to control the item via DMX.
1 SL (1 Channel)
DMX MODE 2 SL (2 Channels)
C O L O R W A L L
Damages caused by the disregard of this user manual are not subject to
for any resulting defects or problems.
by qualified personnel
. All electrical
and mechanical connections have to be carried out according to the European safety
To use the DMX mode, please adjust the address as explained below at the Menu Structure.

DMX MODE 3 SL (5 Channels)
DMX MODE 4 SL (7 Channels)
5 / 14
C O L O R W A L L
DMX MODE 3 SL (5 Channels)
DMX MODE 4 SL (7 Channels)
C O L O R W A L L

If you use cables longer then 100m you should put in a
daisy chain!
Use DMX cables with a 120
The connectors configuration is as follows:
If you want to produce a DMX terminator on your own, you have to insert a
plug. This should have a size of 120
and Pin 3 (Data+).
4.
Work with the Menu
4.1. Menu Structure
6 / 14
C O L O R W A L L
If you use cables longer then 100m you should put in a
terminator at the last item in your
Use DMX cables with a 120
Ωshield only! All plugs should use XLR connectors!
The connectors configuration is as follows:
If you want to produce a DMX terminator on your own, you have to insert a
plug. This should have a size of 120
Ωand
¼ Watt. It has to be inserted between Pin2 (Data
Work with the Menu
C O L O R W A L L
terminator at the last item in your
shield only! All plugs should use XLR connectors!
If you want to produce a DMX terminator on your own, you have to insert a
terminator a the
¼ Watt. It has to be inserted between Pin2 (Data
-)

7 / 14
C O L O R W A L L
C O L O R W A L L

8 / 14
C O L O R W A L L
C O L O R W A L L

9 / 14
C O L O R W A L L
C O L O R W A L L

4.2. Description of Menu
SHNd internal Programms
1. Push the UP/DOWN bu
ttons until the display shows SHNd.
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from
oSh1-20 =
automatic Programs
onste =
Sound Mode for the sound
4. Push the Menu button f
or 3 seconds to confirm
SPEd
Speed of the progograms
1. Push the UP/DOWN bu
ttons until the display shows SPEd.
2. Push ENTER
3. Use the UP/DOWN butt
ons to adjust the s
4. Push ENTER to confirm
SLNd Mode Setup
1. Push the UP/DOWN bu
ttons until the display shows SLNd.
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from
oMASt = Master
for Master Slave Mode
o
SL1 = DMX Mode 1 1 ch
o
SL2 = DMX Mode 2 2 ch
o
SL3 = DMX Mode 3 5 ch
o
SL4 = DMX Mode 4 7 ch
oLuv = Slave
Mode for
4.
Push ENTER to confirm
Soun Sound To Light Mode
1. Push the UP/DOWN bu
ttons until the display shows Soun.
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from1
4.
Push ENTER to confirm
Node select sound controll mode
1. Push the UP/DOWN bu
tt
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from1
4.
Push ENTER to confirm
nste setting master signal
1.
Push the UP/DOWN butt
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose fromON and OFF.
4.
Push ENTER to confirm
10 / 14
C O L O R W A L L
ttons until the display shows SHNd.
ons to choose from
automatic Programs
Sound Mode for the sound
Programs
or 3 seconds to confirm
Speed of the progograms
ttons until the display shows SPEd.
ons to adjust the s
peed of the programs from 0 -
31.
ttons until the display shows SLNd.
ons to choose from
for Master Slave Mode
SL1 = DMX Mode 1 1 ch
SL2 = DMX Mode 2 2 ch
SL3 = DMX Mode 3 5 ch
SL4 = DMX Mode 4 7 ch
Mode for
Master Slave Mode
Push ENTER to confirm
ttons until the display shows Soun.
ons to choose from1
- 100.
Push ENTER to confirm
Node select sound controll mode
tt
ons until the display shows node.
ons to choose from1
- 2.
Push ENTER to confirm
Push the UP/DOWN butt
ons until the display shows nste.
ons to choose fromON and OFF.
Push ENTER to confirm
C O L O R W A L L
31.

ALLC Master Dimmer for all Colors
1.
Push the UP/DOWN butt
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from 0
4.
Push ENTER to confirm
rEd Master Dimmer for Red
1.
Push the UP/DOWN butt
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from 0
4.
Push ENTER to confirm
GrEE Master Dimmer for Green
1.
Push the UP/DOWN butt
2. Push ENTER
3.
Use the UP/DOWN button
4.
Push ENTER to confirm
BLu Master Dimmer for Blue
1.
Push the UP/DOWN butt
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from 0
4. Push ENTER to confirm
bLNd Blackout or Stand By Mode
1.
Push the UP/DOWN buttons until the display shows bLNd.
2. Push ENTER
3.
Use the UP/DOWN buttons to choose from yes and no.
4.
Push ENTER to confirm
Led LEDs On and OFF
1.
Push the UP/DOWN butt
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from ON and O
4.
Push ENTER to confirm
tste Test fixture leds
1.
Push the UP/DOWN buttons until the display shows tste
2. Push ENTER
3. Use the UP/DOWN butt
ons to choose from
4.
Push ENTER to confirm
11 / 14
C O L O R W A L L
ALLC Master Dimmer for all Colors
Push the UP/DOWN butt
ons until the display shows ALLC.
ons to choose from 0
– 100%.
Push ENTER to confirm
Push the UP/DOWN butt
ons until the display shows rEd.
ons to choose from 0
– 100%.
Push ENTER to confirm
GrEE Master Dimmer for Green
Push the UP/DOWN butt
ons until the display shows GrEE.
Use the UP/DOWN button
s to choose from 0 – 100%.
Push ENTER to confirm
BLu Master Dimmer for Blue
Push the UP/DOWN butt
ons until the display shows BLu.
ons to choose from 0
– 100%.
bLNd Blackout or Stand By Mode
Push the UP/DOWN buttons until the display shows bLNd.
Use the UP/DOWN buttons to choose from yes and no.
Push ENTER to confirm
Push the UP/DOWN butt
ons until the display shows Led.
ons to choose from ON and O
FF.
Push ENTER to confirm
Push the UP/DOWN buttons until the display shows tste
.
ons to choose from
1 – 4.
Push ENTER to confirm
C O L O R W A L L

disp
Setting display direction
1.
Push the UP/DOWN buttons until the display shows disp.
2. Push ENTER
3.
Use the UP/DOWN buttons to choose from disp and dsip.
4.
Push ENTER to confirm
Ver Software Version
1.
Push the UP/DOWN buttons until the display shows SLNd.
2. Push ENTER
3.
Now the display shows the actual software version.
rSEt Reset fuunction
1.
Push the UP/DOWN butt
2. Push ENTER
3.
Now the item sets back t
updt update software
1.
Push the UP/DOWN butt
2. Push ENTER
3. Use the UP/DOWN butt
ons to
4.
Push ENTER to confirm
Sign
DMX signal offline led state setup
1.
Push the UP/DOWN buttons until the display shows sign.
2. Push ENTER
3.
Use the UP/DOWN buttons to choose from freez or blackout
4.
Push ENTER to confirm
Colr Select color
1.
Push the UP/DOWN buttons until the display shows colr .
2. Push ENTER
3.
Use the UP/DOWN buttons to choose from 1
4. Push ENTER to confirm
tenp Fixture temperature
1.
Push the UP/DOWN buttons until the display shows tenp.
2. Push ENTER
3.
Now the display shows the actual fixture temperature.
Addr DMX address setting
1.
Push the UP/DOWN buttons until the display shows Addr.
2. Push ENTER
3.
1 appears in the display blinking. With the UP/DOWN buttons you can no adjust the
DMX address from 1 to 512
4. P
ush ENTER to confirm
12 / 14
C O L O R W A L L
Setting display direction
Push the UP/DOWN buttons until the display shows disp.
Use the UP/DOWN buttons to choose from disp and dsip.
Push ENTER to confirm
Push the UP/DOWN buttons until the display shows SLNd.
Now the display shows the actual software version.
Push the UP/DOWN butt
ons until the display shows rSEt.
Now the item sets back t
o default settings .
Push the UP/DOWN butt
ons until the display shows UP 00 .
ons to
timeout 50 into update .
Push ENTER to confirm
DMX signal offline led state setup
Push the UP/DOWN buttons until the display shows sign.
Use the UP/DOWN buttons to choose from freez or blackout
.
Push ENTER to confirm
Push the UP/DOWN buttons until the display shows colr .
Use the UP/DOWN buttons to choose from 1
- 7.
Push the UP/DOWN buttons until the display shows tenp.
Now the display shows the actual fixture temperature.
Push the UP/DOWN buttons until the display shows Addr.
1 appears in the display blinking. With the UP/DOWN buttons you can no adjust the
DMX address from 1 to 512
.
ush ENTER to confirm
C O L O R W A L L
1 appears in the display blinking. With the UP/DOWN buttons you can no adjust the

5.
Master Slaver configuration
If you want to daisy chain and c
ontrol more than
so you have to daisy chain your
items as you wo
use max .
16 items for this mode. The first item in line
according to that item. The master item
will follow.
The slave items should be
1.
Push the Menu button as
2. No
w choose the desired
3. The slave item will now
react according to the master.
6. Sound to light
-
Set up the sound to light mode to ON as described above.
-Now the item will react a
ccording to the
-
This option can be used with the master slave mode as well.
7. Technical Data
Voltage:
100V ~ 240V 50/60Hz
Power consumtion:
max. 45W
Lightsource:
9x3W 3in1 RGB LEDs
Beam Angle:
50°
Weight:
3,5kg
Measures:
424 x
Ambient temp.:
0°C
Modes:
DMX (1, 2, 5 and 7 Channel)
Automatic Mode
Sound to light Mode
Master Slave Mode
13 / 14
C O L O R W A L L
Master Slaver configuration
ontrol more than
one item you can use the Maste
r Slave Mode. To d
items as you wo
uld do when you want to set up
a dmx chain. You c
16 items for this mode. The first item in line
is the master and the
other items will react
according to that item. The master item
can be set up to the desired program or mode and the others
The slave items should be
set up as follows.
Push the Menu button as
often until you see SLNd in the display. Push E
nt
w choose the desired
Slave mode and confirm again with ENTER.
react according to the master.
Set up the sound to light mode to ON as described above.
ccording to the
sensitivity of the mic.
This option can be used with the master slave mode as well.
100V ~ 240V 50/60Hz
max. 45W
9x3W 3in1 RGB LEDs
50°
3,5kg
424 x
127,8 x 110mm (LxWxH)
0°C
– 40°C
DMX (1, 2, 5 and 7 Channel)
Automatic Mode
Sound to light Mode
Master Slave Mode
C O L O R W A L L
r Slave Mode. To d
o
a dmx chain. You c
an
other items will react
can be set up to the desired program or mode and the others
nt
er to confirm.

14 / 14
C O L O R W A L L
Importer:
B&K Braun GmbH
Industriestraße 2
D-76307 Karlsbad-Ittersbach
www.bkbraun.com
[email protected]
C O L O R W A L L