Ignition Matrix Unlimited User manual

Matrix Unlimited
U S E R M A N U A L
Matrix Unlimited

1. Safety instructions
................................
1.1.
FOR SAFE AND EFFICIENT OPERATION
1.2. Security Tips
................................
1.3. Overhead installation
................................
2. Function instruction
................................
3. Packing / Accessories
................................
4. Menu / Display
................................
5. DMX Channel sheet
................................
6. Technical data
................................
2 / 12
M A T R I X U N L I M I T E D
Table of contents
................................
................................
................................
FOR SAFE AND EFFICIENT OPERATION
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................................................
................................
................................
................................
................................
................................
................................................................
...............................
M A T R I X U N L I M I T E D
................................
........................... 3
................................
............ 3
................................
............................ 4
................................
............... 5
................................
......................... 6
................................
..................... 7
................................
. 7
................................
........................ 8
...............................
11

1. Safety instructions
•This
device is suitable for indoor use only.
•
All modifications to the device will void the warranty.
•
Repairs are to carry out by skilled personnel only.
•
Use only fuses of the same type and original parts as spare parts.
•Protect
the unit from rain and humidity to avoid fire and electric shocks.
•
Make sure to unplug the power supply before opening the housing.
1.1.
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun
Not p
ut it in a temperature bellow 32
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-
stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabin
et by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug.
When not using the device for an extended period of time, be sure to di
from the receptacle .
3 / 12
M A T R I X U N L I M I T E D
device is suitable for indoor use only.
All modifications to the device will void the warranty.
Repairs are to carry out by skilled personnel only.
Use only fuses of the same type and original parts as spare parts.
the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing.
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun
or near a heating appliance.
ut it in a temperature bellow 32
°F / 0°C, or exceeding 104°F / 40°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be
placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for
cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
et by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug.
When not using the device for an extended period of time, be sure to di
sconnect the plug
M A T R I X U N L I M I T E D
Use only fuses of the same type and original parts as spare parts.
the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing.
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
et by yourself, it might result a danger of electric shock.
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug.
sconnect the plug

Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems.
Make sure the electrical connection is carried
and mechanical connections have to be carried out according to the European safety
standards.
1.2. Security Tips
Exessive temperature
Ta=40°C
Please do not use the device if the temperature exceeds 40°C/104°F.
Device surface temperature:
Beware of electrical shock
Make sure the electrical connection is carried out by qualified personnel.
Before you plug in the device make sure that the power supply system has
the right voltage and also a crowbar
Rated voltage range: AC110V
Fire risk
Make sure that the fuse functioned. It is never allowed to bridge it. If you
have to exchange it only use fuses of the same type.
The distanc
e between the device and lighted things has to be at least 1m.
From a distance of 1m the temperature of the beam subside among 60°C.
It is not allowed cover fans and air in and outlets.
Make sure that there is a distance between the device and all objec
Don’t put or mount anything on the lens.
-
Led consecutive working hours are not recommended more than 10 hours.
-
The cooling fan should be cleaned weekly! If there is too much dirt or dust at the fan
it might be possible that the
parts will going to lose their function or can be damaged
4 / 12
M A T R I X U N L I M I T E D
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems.
Make sure the electrical connection is carried
out by qualified personnel. All electrical
and mechanical connections have to be carried out according to the European safety
Exessive temperature
Please do not use the device if the temperature exceeds 40°C/104°F.
Device surface temperature:
max. 60°C
Beware of electrical shock
Make sure the electrical connection is carried out by qualified personnel.
Before you plug in the device make sure that the power supply system has
the right voltage and also a crowbar
. Every device has to be grounded.
Rated voltage range: AC110V
-120V/60Hz or AC200V-
240V / 50HZ
Make sure that the fuse functioned. It is never allowed to bridge it. If you
have to exchange it only use fuses of the same type.
e between the device and lighted things has to be at least 1m.
From a distance of 1m the temperature of the beam subside among 60°C.
It is not allowed cover fans and air in and outlets.
Make sure that there is a distance between the device and all objec
Don’t put or mount anything on the lens.
Led consecutive working hours are not recommended more than 10 hours.
The cooling fan should be cleaned weekly! If there is too much dirt or dust at the fan
it might be possible that the
device cannot be cooled enough and some electronic
parts will going to lose their function or can be damaged
.
M A T R I X U N L I M I T E D
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems.
out by qualified personnel. All electrical
and mechanical connections have to be carried out according to the European safety
Please do not use the device if the temperature exceeds 40°C/104°F.
Make sure the electrical connection is carried out by qualified personnel.
Before you plug in the device make sure that the power supply system has
. Every device has to be grounded.
240V / 50HZ
Make sure that the fuse functioned. It is never allowed to bridge it. If you
e between the device and lighted things has to be at least 1m.
From a distance of 1m the temperature of the beam subside among 60°C.
Make sure that there is a distance between the device and all objec
ts in area of 0,5m.
Led consecutive working hours are not recommended more than 10 hours.
The cooling fan should be cleaned weekly! If there is too much dirt or dust at the fan
device cannot be cooled enough and some electronic

When we send out the goods, they are well packaged and also at best condition. Every product
was tested before delivery. If you recognize mistake
agent or the supplier. Please read this manual faithful. In this manual you can find information
about the handling and the safety regulations of this product. If you disregard this manual we
cannot give a warranty
for it. Technical changes, which are for progress, may be possible at
any time. They are not mentioned particularly in this manual, but affixed extra.
1.3.
Overhead installation
Danger of life!
You have to observe the regulations of BGV C1 (formerly VBG 70) and
EN60598-2-7!
Installations are to carry out by skilled personnel only.
Basically installation has to be made by using a second separate suspension. This can be e.g. a
suitable net. The
second suspension must be designed and attached so no part of the installation can
fall down in case of failure.
During construction, reconstruction and deconstruction unnecessary stay in the range of moving
areas, on lightning bridges, under elevated wor
The operator is obliged to following safety
- Before the first start-
up or after critical changes before restarting it has to be checked by an
expert.
- Review in the fr
ame of the inspection test at least all four years by an expert. .
-
Review by a qualified person at least once a year.
How to carry out the overhead installation:
In tidal fall you should install the device out of the lounge area of people
IMPORTANT!
Overhead installation requires a high level of experience. This includes knowledge of
calculating the payload, used installation material and safety inspections of the used material and the
projector whereas the required experience is not limite
yourself under any circumstances if you are not qualified. Contact a professional installer. An
inappropriate installation can lead to injuries and/or damaged properties.
5 / 12
M A T R I X U N L I M I T E D
When we send out the goods, they are well packaged and also at best condition. Every product
was tested before delivery. If you recognize mistake
s or damages please contact the delivery
agent or the supplier. Please read this manual faithful. In this manual you can find information
about the handling and the safety regulations of this product. If you disregard this manual we
for it. Technical changes, which are for progress, may be possible at
any time. They are not mentioned particularly in this manual, but affixed extra.
Overhead installation
Danger of life!
You have to observe the regulations of BGV C1 (formerly VBG 70) and
Installations are to carry out by skilled personnel only.
Basically installation has to be made by using a second separate suspension. This can be e.g. a
second suspension must be designed and attached so no part of the installation can
During construction, reconstruction and deconstruction unnecessary stay in the range of moving
areas, on lightning bridges, under elevated wor
k stations or any other danger zones is forbidden.
The operator is obliged to following safety
-related and mechanical facilities:
up or after critical changes before restarting it has to be checked by an
ame of the inspection test at least all four years by an expert. .
Review by a qualified person at least once a year.
How to carry out the overhead installation:
In tidal fall you should install the device out of the lounge area of people
.
Overhead installation requires a high level of experience. This includes knowledge of
calculating the payload, used installation material and safety inspections of the used material and the
projector whereas the required experience is not limite
d to this. Do not try to carry out installation
yourself under any circumstances if you are not qualified. Contact a professional installer. An
inappropriate installation can lead to injuries and/or damaged properties.
M A T R I X U N L I M I T E D
When we send out the goods, they are well packaged and also at best condition. Every product
s or damages please contact the delivery
agent or the supplier. Please read this manual faithful. In this manual you can find information
about the handling and the safety regulations of this product. If you disregard this manual we
for it. Technical changes, which are for progress, may be possible at
any time. They are not mentioned particularly in this manual, but affixed extra.
You have to observe the regulations of BGV C1 (formerly VBG 70) and
Installations are to carry out by skilled personnel only.
Basically installation has to be made by using a second separate suspension. This can be e.g. a
second suspension must be designed and attached so no part of the installation can
During construction, reconstruction and deconstruction unnecessary stay in the range of moving
k stations or any other danger zones is forbidden.
up or after critical changes before restarting it has to be checked by an
ame of the inspection test at least all four years by an expert. .
Overhead installation requires a high level of experience. This includes knowledge of
calculating the payload, used installation material and safety inspections of the used material and the
d to this. Do not try to carry out installation
yourself under any circumstances if you are not qualified. Contact a professional installer. An

It is not allowed to install the d
evice in the grip area of people.
If the device may hang from the ceiling or from high beams, the use of truss systems is mandatory.
The device may not be installed so it can swing freely in the room.
Please note: Crashing down items can cause serious i
the safety of a possible installation form!
Before installation make sure that the mounting surface has the ability to carry the tenfold point load of
the own weight of the device.
Mount the device with
the mounting
During overhead installation the device must be always secured by a safety rope which is designed to
hold the twelvefold weight of device. Only safety ropes with quick
may be used. Hang up the safety rope in the hole of the mounting bracket. Direct the rope over the
truss or an appropriate fastening point. Hang up the end in the fastening element and tie up the
locking nut. A safety rope once exposed
The maximum drop exceed must not exceed 20cm.
2.
Function instruction
-
International universal control signal:
-
Infinite rotating Pan & Tilt
-
Faster speeds: 3 phase motor
-
DMX Channel: 118/22/18ch
-
Outstanding Beam effect, specific optic system
- Pixel-
mapping effect : individual control of each LED source in expanded FULL
COLOR mode (RGBW),
effects or images
- DMX512, Sound,
Auto, Master/Slave
- Dimmer/Shutter
- RGBW color mixing
- Power in & out
-
DMX Connectors: 3 pin XLR connector in and out
- LCD screen
6 / 12
M A T R I X U N L I M I T E D
evice in the grip area of people.
If the device may hang from the ceiling or from high beams, the use of truss systems is mandatory.
The device may not be installed so it can swing freely in the room.
Please note: Crashing down items can cause serious i
njuries! Do not install the projector, if you doubt
the safety of a possible installation form!
Before installation make sure that the mounting surface has the ability to carry the tenfold point load of
the mounting
-
bracket to your trussing system using an appropriate clamp.
During overhead installation the device must be always secured by a safety rope which is designed to
hold the twelvefold weight of device. Only safety ropes with quick
-release safe
ty fastener elements
may be used. Hang up the safety rope in the hole of the mounting bracket. Direct the rope over the
truss or an appropriate fastening point. Hang up the end in the fastening element and tie up the
locking nut. A safety rope once exposed
to failing load or damaged may not be used furthermore.
The maximum drop exceed must not exceed 20cm.
Function instruction
International universal control signal:
DMX512 USITT 1990 standard
Infinite rotating Pan & Tilt
Faster speeds: 3 phase motor
DMX Channel: 118/22/18ch
Outstanding Beam effect, specific optic system
mapping effect : individual control of each LED source in expanded FULL
COLOR mode (RGBW),
offers the option to display numbers, letters, graphic
Auto, Master/Slave
DMX Connectors: 3 pin XLR connector in and out
M A T R I X U N L I M I T E D
If the device may hang from the ceiling or from high beams, the use of truss systems is mandatory.
njuries! Do not install the projector, if you doubt
Before installation make sure that the mounting surface has the ability to carry the tenfold point load of
bracket to your trussing system using an appropriate clamp.
During overhead installation the device must be always secured by a safety rope which is designed to
ty fastener elements
may be used. Hang up the safety rope in the hole of the mounting bracket. Direct the rope over the
truss or an appropriate fastening point. Hang up the end in the fastening element and tie up the
to failing load or damaged may not be used furthermore.
DMX512 USITT 1990 standard
mapping effect : individual control of each LED source in expanded FULL
offers the option to display numbers, letters, graphic

3.
Packing / Accessories
The device could be packed in carton, in a single case or in twin case.
o1x
Matrix Unlimited
o1x
User manual
o1x
Power cable
o1x
DMX cable
o2x Clamp
4. Menu / Display
Set DMX
Address
118 Channel
System Reset
Version
Set Run
Dimmer All LEDs R
MANUAL
Dimmer
Dimmer All LEDs
Dimmer All LEDs
Set Run
Program
SOUND
P01
Set Run
Program
AUTO LED
P01
Set Run AUTO XY
Program
P01
7 / 12
M A T R I X U N L I M I T E D
Packing / Accessories
The device could be packed in carton, in a single case or in twin case.
Matrix Unlimited
User manual
Power cable
DMX cable
18 Channel Address
22 Channel 001 -
512
118 Channel
Version
Dimmer All LEDs R
000 -
255
Dimmer
All LEDs G 000 -
255
Dimmer All LEDs
B 000 -
255
Dimmer All LEDs
W 000 -
255
Program
P01
- P10
Program
Speed
P01
- P12 SP01 –
SP10
Program
P01
– P10
M A T R I X U N L I M I T E D
The device could be packed in carton, in a single case or in twin case.
512
255
255
255
255
SP10

5. DMX
Channel sheet
18ch 22ch 118ch
CH1 CH1 CH1
CH2 CH2 CH2
CH3 CH3 CH3
CH4 CH4 CH4
CH5 CH5 CH5
CH6 CH6 CH6
CH7 CH7 CH7
CH8 CH8 CH8
8 / 12
M A T R I X U N L I M I T E D
Channel sheet
Function Channel
Value Description
Pan
0-35
36-162
163-255
No function
Continuous Rotating CW
Continuous Rotating CCW
Pan 0-255 0-540°
Tilt
0-35
36-162
163-255
No function
Continuous Rotating CW
Continuous Rotating CCW
Tilt 0-255 0-270 °
Pan Fine 0-255 Pan Fine
Tilt Fine 0-255 Tilt Fine
Pan, Tilt Speed
Adjustment 0-255
From fast to slow
Built-in Program
(image)
0-47
48-63
64-79
80-95
96-111
112-127
128-143
144-159
160-175
No function
Single control.
LED Chase
LED Run
LED Jump
LED Edacity
LED Grouping
Image 1
Image 2
M A T R I X U N L I M I T E D
Continuous Rotating CW
Continuous Rotating CCW
Continuous Rotating CW
Continuous Rotating CCW
From fast to slow

CH9 CH9 CH9
CH10 CH10 CH10
9 / 12
M A T R I X U N L I M I T E D
176-191
192-207
208-255
224-239
240-245
246-255
Image 3
Image 4
Image 5
Sound Mode
Sound
mode with movement
Total Program
Built-in Program
(Numbers &
Symbols)
0-8
9-17
18-26
27-35
36-44
45-53
54-62
63-71
72-80
81-89
90-98
99-107
108-116
117-125
126-134
135-143
144-152
153-161
162-170
171-179
180-188
189-197
198-206
207-215
216-224
225-233
234-242
243-255
No function
0
1
2
3
4
5
6
7
8
9
+
-
x
÷
⁄
＜
＞
？
！
*
Ó
#
Á
Ç
（
）
Total Program
Built-in Program
(Letters)
0-8
9-17
18-26
27-35
36-44
45-53
54-62
63-71
72-80
81-89
90-98
99-107
108-116
117-125
126-134
135-143
144-152
153-161
162-170
171-179
No Function
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
M A T R I X U N L I M I T E D
mode with movement

CH11 CH11 CH11
CH12 CH12 CH12
CH13 CH13 CH13
CH14 CH14 CH14
CH15 CH15 CH15
CH16 CH16 CH16
CH17 CH17 CH17
CH18
CH19
CH20
CH21
CH22
CH18
CH19
CH20
CH21
CH22
10 / 12
M A T R I X U N L I M I T E D
180-188
189-197
198-206
207-215
216-224
225-233
234-242
243-255
T
U
V
W
X
Y
Z
Total Program
Built-in Program
Speed Adjustment 0-255
From slow to fast
LED Strobe 0-255 Strobe effects
RGBW Dimmer 0-255
From dark to bright (can control
the build-
in program)
Global Red 0-255
From dark to bright
Global Green 0-255
From dark to bright
Global Blue 0-255
From dark to bright
Global White 0-255
From dark to bright
LED LINE 1 0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-63
64-71
72-79
80-87
88-95
96-103
104-111
112-119
120-127
128-135
136-143
144-151
152-159
160-167
168-175
176-183
184-191
192-199
200-207
208-215
216-223
224-231
232-239
240-247
248-255
LED 1 ,2 ,3 ,4 & 5 ON
LED 1 ON
LED 2 ON
LED 1& 2 ON
LED 3 ON
LED 1&3 ON
LED 2&3 ON
LED 1 , 2 &3 ON
LED 4 ON
LED 1&4 ON
LED 2&4 ON
LED 1, 2 &4 ON
LED 3&4 ON
LED 1 ,3 &4 ON
LED 2
,3 &4 ON
LED 1 ,2, 3 &4 ON
LED 5 ON
LED 1 &5 ON
LED 2&5 ON
LED 1 ,2 &5 ON
LED 3 & 5 ON
LED 1 ,3 &5 ON
LED 2 ,3 & 5 ON
LED 1, 2 ,3 & 5ON
LED 4&5 ON
LED 1 ,4 & 5 ON
LED 2 ,4 & 5 ON
LED 1, 2 ,4 & 5 ON
LED 3, 4 & 5 ON
LED 1
，
3 ,4 & 5 ON
LED 2, 3 ,4 & 5 ON
No function
LED LINE 2
LED LINE 3
LED LINE 4
LED LINE 5
1R 0-255
From dark to bright
1G 0-255
From dark to bright
1B 0-255
From dark to bright
1W 0-255
From dark to bright
2R 0-255
From dark to bright
M A T R I X U N L I M I T E D
From slow to fast
From dark to bright (can control
in program)
From dark to bright
From dark to bright
From dark to bright
From dark to bright
LED 1 ,2 ,3 ,4 & 5 ON
LED 1 , 2 &3 ON
LED 1, 2 &4 ON
LED 1 ,3 &4 ON
,3 &4 ON
LED 1 ,2, 3 &4 ON
LED 1 ,2 &5 ON
LED 1 ,3 &5 ON
LED 2 ,3 & 5 ON
LED 1, 2 ,3 & 5ON
LED 1 ,4 & 5 ON
LED 2 ,4 & 5 ON
LED 1, 2 ,4 & 5 ON
LED 3, 4 & 5 ON
3 ,4 & 5 ON
LED 2, 3 ,4 & 5 ON
From dark to bright
From dark to bright
From dark to bright
From dark to bright
From dark to bright

CH23
CH24
CH25
CH26
CH27
......
CH113
CH114
CH115
CH116
CH117
CH18 CH118
6. Technical data
- Power supply: AC110
-
- Power
consumption: 300W
- Led source:
25x12W Cree Quad LEDs, Each LED with individual DMX Controls
- Beam angle: 5°
- Dimension: 39 x 39 x
48.5
11 / 12
M A T R I X U N L I M I T E D
2G 0-255
From dark to bright
2B 0-255
From dark to bright
2W 0-255
From dark to bright
3R 0-255
From dark to bright
3G 0-255
From dark to bright
24W 0-255 From dark to
bright
25R 0-255
From dark to bright
25G 0-255
From dark to bright
25B 0-255
From dark to bright
25W 0-255
From dark to bright
Reset 250-253 Reset
-
240V/50-60HZ
consumption: 300W
25x12W Cree Quad LEDs, Each LED with individual DMX Controls
48.5
cm
M A T R I X U N L I M I T E D
From dark to bright
From dark to bright
From dark to bright
From dark to bright
From dark to bright
bright
From dark to bright
From dark to bright
From dark to bright
From dark to bright
25x12W Cree Quad LEDs, Each LED with individual DMX Controls

12 / 12
M A T R I X U N L I M I T E D
Importer:
B&K Braun GmbH
Industriestraße 2
D-76307 Karlsbad-Ittersbach
www.bkbraun.com
[email protected]
M A T R I X U N L I M I T E D