Ignition Strip Blinder Twist User manual

Strip Blinder Twist
USER
Strip Blinder Twist
USER
MANUAL
Strip Blinder Twist
MANUAL
Strip Blinder Twist
Strip Blinder Twist

1.
Safety instructions
1.1.
2.
General Instructions
2.1.
2.2.
3.
Main Features
4.
Operation Guide
4.1.
4.1.1.
4.2.
5.
Technical Specifications:
6.
Handling……………………………………………………………………………………………………...7
Safety instructions
FOR SAFE AND EFFICIENT OPERATION
General Instructions
Warnings
................................
Cautions
................................
Main Features
................................
Operation Guide
Operat
ion Modes:
4.1.1.
DMX Mode:
Chase Mode:
Technical Specifications:
Handling……………………………………………………………………………………………………...7
Safety instructions
................................
FOR SAFE AND EFFICIENT OPERATION
General Instructions
……………………………………………………………………………………….4
................................
................................
................................
Operation Guide
................................
ion Modes:
................................
DMX Mode:
................................
Chase Mode:
................................
Technical Specifications:
…………………………………………………………………………………..6
Handling……………………………………………………………………………………………………...7
Table of contents
................................
................................
FOR SAFE AND EFFICIENT OPERATION
……………………………………………………………………………………….4
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
…………………………………………………………………………………..6
Handling……………………………………………………………………………………………………...7
2 / 8
Table of contents
................................
FOR SAFE AND EFFICIENT OPERATION
................................
……………………………………………………………………………………….4
................................
................................
................................
................................
................................
................................
................................
................................
................................
…………………………………………………………………………………..6
Handling……………………………………………………………………………………………………...7
STRIP BLINDER TWIST
Table of contents
................................
................................
................................
……………………………………………………………………………………….4
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
…………………………………………………………………………………..6
Handling……………………………………………………………………………………………………...7
STRIP BLINDER TWIST
................................
................................
................................
……………………………………………………………………………………….4
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
…………………………………………………………………………………..6
Handling……………………………………………………………………………………………………...7
STRIP BLINDER TWIST
................................
...........................
................................
............
……………………………………………………………………………………….4
................................
................................
................................
................................
..............................
................................
....................
................................
......................
................................
...........................
…………………………………………………………………………………..6
Handling……………………………………………………………………………………………………...7
STRIP BLINDER TWIST
...........................
3
............
3
……………………………………………………………………………………….4
................................
.. 4
................................
... 4
................................
.. 4
..............................
5
....................
5
......................
5
...........................
5
…………………………………………………………………………………..6
Handling……………………………………………………………………………………………………...7

1.
Safety instructions
1.1.
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not p
ut it in a temperature bellow 32
Keep away from humidity, water and dust
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un
Select a level and stable location to
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and
cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
device for an extended period of time, be sure to disconnect the plug from the receptacle.
Important:
dealer will not accept liability for any resulting defect
carried out
according to the European safety standards.
Safety instructions
•
•
•
•
•
•
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and
Avoid exposing it to direct rays of the sun or near a heating appliance.
ut it in a temperature bellow 32
Keep away from humidity, water and dust
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un
Select a level and stable location to
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and
cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
device for an extended period of time, be sure to disconnect the plug from the receptacle.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defect
carried out
by qualified personnel
according to the European safety standards.
Safety instructions
•
This
device is suitable for indoor use only.
•
All modifications to the device will void the warranty.
•
Repairs are to carry out by skilled personnel only.
•
Use only fuses
•
Protect the unit from rain and humidity to avoid fire and electric shocks.
•
Make sure to unplug the power supply before opening the housing
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and
extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
ut it in a temperature bellow 32
Keep away from humidity, water and dust
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un
-
stable location
Select a level and stable location to
avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and
cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
device for an extended period of time, be sure to disconnect the plug from the receptacle.
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defect
by qualified personnel
according to the European safety standards.
device is suitable for indoor use only.
All modifications to the device will void the warranty.
Repairs are to carry out by skilled personnel only.
Use only fuses
of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing
FOR SAFE AND EFFICIENT OPERATION
extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
ut it in a temperature bellow 32
°F /
0°C, or exceeding 1
Keep away from humidity, water and dust
.
Do not place the set in a location with high
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
stable location
avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and
cabinet by yourself, it might result a danger of electric shock.
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
device for an extended period of time, be sure to disconnect the plug from the receptacle.
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defect
by qualified personnel
. All electrical and mechanical connections have to be carried out
according to the European safety standards.
3 / 8
device is suitable for indoor use only.
All modifications to the device will void the warranty.
Repairs are to carry out by skilled personnel only.
of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing
FOR SAFE AND EFFICIENT OPERATION
Avoid exposing it to direct rays of the sun or near a heating appliance.
0°C, or exceeding 1
3
1°F / 5
Do not place the set in a location with high
Containers with water should not be placed on the set.
Such as transformer motor, tuner, TV set and amplifier.
avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and
contact with an engineer for repairing, do not open the
cabinet by yourself, it might result a danger of electric shock.
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
device for an extended period of time, be sure to disconnect the plug from the receptacle.
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defect
s or problems.
. All electrical and mechanical connections have to be carried out
STRIP BLINDER TWIST
device is suitable for indoor use only.
All modifications to the device will void the warranty.
Repairs are to carry out by skilled personnel only.
of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing
Avoid exposing it to direct rays of the sun or near a heating appliance.
1°F / 5
5°C.
Do not place the set in a location with high
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
contact with an engineer for repairing, do not open the
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
device for an extended period of time, be sure to disconnect the plug from the receptacle.
Damages caused by the disregard of this user manual are not subject to warranty. The
s or problems.
Make sure the
. All electrical and mechanical connections have to be carried out
STRIP BLINDER TWIST
All modifications to the device will void the warranty.
of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing
Do not place the set in a location with high
humidity or lots of dust.
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
contact with an engineer for repairing, do not open the
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
device for an extended period of time, be sure to disconnect the plug from the receptacle.
Damages caused by the disregard of this user manual are not subject to warranty. The
Make sure the
electrical connection is
. All electrical and mechanical connections have to be carried out
STRIP BLINDER TWIST
of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing
.
humidity or lots of dust.
contact with an engineer for repairing, do not open the
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not
using the
Damages caused by the disregard of this user manual are not subject to warranty. The
electrical connection is
. All electrical and mechanical connections have to be carried out
STRIP BLINDER TWIST
humidity or lots of dust.
contact with an engineer for repairing, do not open the
using the
Damages caused by the disregard of this user manual are not subject to warranty. The
electrical connection is
. All electrical and mechanical connections have to be carried out

2.
General Instructions
For the optimum operation and best performance, read the instruction in this manual carefully an
they give important
further reference. If the unit i
new owner reading about its operation and relative instruction
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping carto
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
sure your product is not
happens, please contact the nea
2.1.
Warnings
-
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
it. Packaging materials are not toys. To avoid danger of
-
Do not use in cribs, beds, carriages or playpens.
-
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
-
Never try to repair the unit yourself. Repair by unqualified people could caus
-
Don
-
After use, please wait at least 15 min for
of burning.
2.2.
Cautions
The
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
responsible for any damage resulti
Do not make any inflammable liquids, water or metal objects enter the unit.
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
way result in ele
wall socket before any service operation and when not in use for a long time.
Earth connection is so essential.
After having remove the packaging check that the
contact authorized dealer.
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
a check or contact us directly.
3.
Main Features
General Instructions
For the optimum operation and best performance, read the instruction in this manual carefully an
they give important
information
further reference. If the unit i
new owner reading about its operation and relative instruction
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping carto
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
sure your product is not
happens, please contact the nea
Warnings
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
it. Packaging materials are not toys. To avoid danger of
Do not use in cribs, beds, carriages or playpens.
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
Never try to repair the unit yourself. Repair by unqualified people could caus
Don
’
t touch it while the fixture is running operation to avoid any hurts happening occurred.
After use, please wait at least 15 min for
of burning.
Cautions
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
responsible for any damage resulti
Do not make any inflammable liquids, water or metal objects enter the unit.
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
way result in ele
ctric shock. This unit contains dangerous voltages, always remove the AC power plug from the
wall socket before any service operation and when not in use for a long time.
Earth connection is so essential.
After having remove the packaging check that the
contact authorized dealer.
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
a check or contact us directly.
Main Features
o01
,02,05,10 DMX Channels selection
o
Standard DMX 3
o
16 built
o0-
100% dimming level
o
Standard DMX
o
01 Thru 99 Chase speed adjustment
o
Power failure memory
o
LED display window
General Instructions
For the optimum operation and best performance, read the instruction in this manual carefully an
information
regarding safety during use and maintenance. Keep this manual with the unit for
further reference. If the unit i
s sold or given to another operator, make
new owner reading about its operation and relative instruction
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping carto
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
sure your product is not
damaged
and included accessories are not missing. If damaged or missing
happens, please contact the nea
rest dealer or our customer support staff directly.
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
it. Packaging materials are not toys. To avoid danger of
Do not use in cribs, beds, carriages or playpens.
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
Never try to repair the unit yourself. Repair by unqualified people could caus
t touch it while the fixture is running operation to avoid any hurts happening occurred.
After use, please wait at least 15 min for
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
responsible for any damage resulti
ng from using the unit with improper voltage.
Do not make any inflammable liquids, water or metal objects enter the unit.
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
ctric shock. This unit contains dangerous voltages, always remove the AC power plug from the
wall socket before any service operation and when not in use for a long time.
Earth connection is so essential.
After having remove the packaging check that the
contact authorized dealer.
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
a check or contact us directly.
Main Features
,02,05,10 DMX Channels selection
Standard DMX 3
-
pin In/Out
16 built
-
in programs except for Auto&Full subject to Speed and Dimmer
100% dimming level
Standard DMX
-
512 protocol
01 Thru 99 Chase speed adjustment
Power failure memory
LED display window
For the optimum operation and best performance, read the instruction in this manual carefully an
regarding safety during use and maintenance. Keep this manual with the unit for
s sold or given to another operator, make
new owner reading about its operation and relative instruction
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping carto
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
and included accessories are not missing. If damaged or missing
rest dealer or our customer support staff directly.
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
it. Packaging materials are not toys. To avoid danger of
Do not use in cribs, beds, carriages or playpens.
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
Never try to repair the unit yourself. Repair by unqualified people could caus
t touch it while the fixture is running operation to avoid any hurts happening occurred.
After use, please wait at least 15 min for
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
ng from using the unit with improper voltage.
Do not make any inflammable liquids, water or metal objects enter the unit.
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
ctric shock. This unit contains dangerous voltages, always remove the AC power plug from the
wall socket before any service operation and when not in use for a long time.
After having remove the packaging check that the
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
,02,05,10 DMX Channels selection
pin In/Out
in programs except for Auto&Full subject to Speed and Dimmer
100% dimming level
512 protocol
01 Thru 99 Chase speed adjustment
Power failure memory
LED display window
-
4 digits Segment Display shows current activity and function state
4 / 8
For the optimum operation and best performance, read the instruction in this manual carefully an
regarding safety during use and maintenance. Keep this manual with the unit for
s sold or given to another operator, make
new owner reading about its operation and relative instruction
again
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping carto
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
and included accessories are not missing. If damaged or missing
rest dealer or our customer support staff directly.
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
it. Packaging materials are not toys. To avoid danger of
Do not use in cribs, beds, carriages or playpens.
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
Never try to repair the unit yourself. Repair by unqualified people could caus
t touch it while the fixture is running operation to avoid any hurts happening occurred.
After use, please wait at least 15 min for
absolute
cool before touching it. Otherwise, it causes the result
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
ng from using the unit with improper voltage.
Do not make any inflammable liquids, water or metal objects enter the unit.
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
ctric shock. This unit contains dangerous voltages, always remove the AC power plug from the
wall socket before any service operation and when not in use for a long time.
After having remove the packaging check that the
unit is not damage in any way. If in doubt, DO NOT use it and
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
,02,05,10 DMX Channels selection
in programs except for Auto&Full subject to Speed and Dimmer
01 Thru 99 Chase speed adjustment
4 digits Segment Display shows current activity and function state
STRIP BLINDER TWIST
For the optimum operation and best performance, read the instruction in this manual carefully an
regarding safety during use and maintenance. Keep this manual with the unit for
s sold or given to another operator, make
certain
again
.
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping carto
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
and included accessories are not missing. If damaged or missing
rest dealer or our customer support staff directly.
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
it. Packaging materials are not toys. To avoid danger of
suffocation must
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
Never try to repair the unit yourself. Repair by unqualified people could caus
t touch it while the fixture is running operation to avoid any hurts happening occurred.
cool before touching it. Otherwise, it causes the result
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
ng from using the unit with improper voltage.
Do not make any inflammable liquids, water or metal objects enter the unit.
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
ctric shock. This unit contains dangerous voltages, always remove the AC power plug from the
wall socket before any service operation and when not in use for a long time.
unit is not damage in any way. If in doubt, DO NOT use it and
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
in programs except for Auto&Full subject to Speed and Dimmer
4 digits Segment Display shows current activity and function state
STRIP BLINDER TWIST
For the optimum operation and best performance, read the instruction in this manual carefully an
regarding safety during use and maintenance. Keep this manual with the unit for
certain
that is always has its manual for
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping carto
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
and included accessories are not missing. If damaged or missing
rest dealer or our customer support staff directly.
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
suffocation must
be keep away from children.
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
Never try to repair the unit yourself. Repair by unqualified people could caus
e damage or mis
t touch it while the fixture is running operation to avoid any hurts happening occurred.
cool before touching it. Otherwise, it causes the result
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
ng from using the unit with improper voltage.
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
ctric shock. This unit contains dangerous voltages, always remove the AC power plug from the
wall socket before any service operation and when not in use for a long time.
unit is not damage in any way. If in doubt, DO NOT use it and
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
in programs except for Auto&Full subject to Speed and Dimmer
4 digits Segment Display shows current activity and function state
STRIP BLINDER TWIST
For the optimum operation and best performance, read the instruction in this manual carefully an
d
thoroughly.
regarding safety during use and maintenance. Keep this manual with the unit for
that is always has its manual for
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping carto
n and
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
and included accessories are not missing. If damaged or missing
something
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
be keep away from children.
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
e damage or mis
-
operation.
t touch it while the fixture is running operation to avoid any hurts happening occurred.
cool before touching it. Otherwise, it causes the result
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
ctric shock. This unit contains dangerous voltages, always remove the AC power plug from the
unit is not damage in any way. If in doubt, DO NOT use it and
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
4 digits Segment Display shows current activity and function state
STRIP BLINDER TWIST
thoroughly.
As
regarding safety during use and maintenance. Keep this manual with the unit for
that is always has its manual for
n and
inspect thoroughly saving the carton and all packing materials for possible use later. Check carefully and make
something
The unit is not a toy, must only be operated by adults. Do NOT allow any children to temper or play with
be keep away from children.
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
operation.
cool before touching it. Otherwise, it causes the result
voltage mush be matched the specified on this unit. Using the product with a higher voltage than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. We will not be held
This unit contains no user serviceable parts inside. Never open the unit unless qualified person to do so, as this
ctric shock. This unit contains dangerous voltages, always remove the AC power plug from the
unit is not damage in any way. If in doubt, DO NOT use it and
Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for
4 digits Segment Display shows current activity and function state

4.
Operation Guide
4.1.
Operation Modes:
The
Strip Blinder Twist
01,02,05,10 channel DMX dimmer.
4.1.1.
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
set your unit dimmer function as a 01,02,05,10 channel DMX di
1.
Selecting DMX Mode:
DMX mode is indicated by an
means the DMX Mode has been activated at present. If
in the Chase Mode. Of course, the mode switch can
“
2.
Selecting the Channel Mode:
Channel Mode is indicated by
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
NOTE:
When CH: 01 is
W
hen CH: 02 is displayed, channel 1 and 2
controlled by one DMX channel, and so forth, channel 9 and 10 will be
W
hen CH: 05 is displayed, channel 1
by another.
When CH: 10 is displayed, each channel will be
This is the factory default setting.
3.
Selecting DMX Address Mode:
DMX Address Mode is indicated by
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
is the factory default setting.
4.
Setting the DMX Address:
Once you have activated the DMX Mode as step 1, you can use
select your desired DMX address from 001
4.2.
Chase Mode:
U
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
10 channel chasers. The unit has 16 built
these
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set
programs will be chased.
Operation Guide
Operation Modes:
Strip Blinder Twist
01,02,05,10 channel DMX dimmer.
DMX Mode:
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
set your unit dimmer function as a 01,02,05,10 channel DMX di
Selecting DMX Mode:
DMX mode is indicated by an
means the DMX Mode has been activated at present. If
in the Chase Mode. Of course, the mode switch can
“
MODE”
button.
Selecting the Channel Mode:
Channel Mode is indicated by
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
When CH: 01 is
displayed, overall
hen CH: 02 is displayed, channel 1 and 2
controlled by one DMX channel, and so forth, channel 9 and 10 will be
hen CH: 05 is displayed, channel 1
by another.
When CH: 10 is displayed, each channel will be
This is the factory default setting.
Selecting DMX Address Mode:
DMX Address Mode is indicated by
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
is the factory default setting.
Setting the DMX Address:
Once you have activated the DMX Mode as step 1, you can use
select your desired DMX address from 001
Chase Mode:
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
10 channel chasers. The unit has 16 built
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set
programs will be chased.
Operation Guide
Operation Modes:
Strip Blinder Twist
has two different operation modes. It can be used a 10 channel chaser or as a
01,02,05,10 channel DMX dimmer.
Please follow illustrations below to
DMX Mode:
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
set your unit dimmer function as a 01,02,05,10 channel DMX di
Selecting DMX Mode:
DMX mode is indicated by an
means the DMX Mode has been activated at present. If
in the Chase Mode. Of course, the mode switch can
button.
Selecting the Channel Mode:
Channel Mode is indicated by
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
displayed, overall
channels will be controlled by one DMX channel.
hen CH: 02 is displayed, channel 1 and 2
controlled by one DMX channel, and so forth, channel 9 and 10 will be
hen CH: 05 is displayed, channel 1
When CH: 10 is displayed, each channel will be
This is the factory default setting.
Selecting DMX Address Mode:
DMX Address Mode is indicated by
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
is the factory default setting.
Setting the DMX Address:
Once you have activated the DMX Mode as step 1, you can use
select your desired DMX address from 001
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
10 channel chasers. The unit has 16 built
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set
programs will be chased.
has two different operation modes. It can be used a 10 channel chaser or as a
Please follow illustrations below to
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
set your unit dimmer function as a 01,02,05,10 channel DMX di
DMX mode is indicated by an
“A”
followed by three digits in the LED.
means the DMX Mode has been activated at present. If
in the Chase Mode. Of course, the mode switch can
Selecting the Channel Mode:
Channel Mode is indicated by
“CH”
followed by two digits 01,02,05,
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
channels will be controlled by one DMX channel.
hen CH: 02 is displayed, channel 1 and 2
will be controlled by one DMX channel, channel 3 and 4 will be
controlled by one DMX channel, and so forth, channel 9 and 10 will be
hen CH: 05 is displayed, channel 1
-
5 will be controlled by one DMX channel and channel 6
When CH: 10 is displayed, each channel will be
controlled
Selecting DMX Address Mode:
DMX Address Mode is indicated by
“A”
followed by three digits 001
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
is the factory default setting.
Setting the DMX Address:
Once you have activated the DMX Mode as step 1, you can use
select your desired DMX address from 001
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
10 channel chasers. The unit has 16 built
-
in programs except for Auto and Ful
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set
5 / 8
has two different operation modes. It can be used a 10 channel chaser or as a
Please follow illustrations below to
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
set your unit dimmer function as a 01,02,05,10 channel DMX di
mmer and DMX address
followed by three digits in the LED.
means the DMX Mode has been activated at present. If
in the Chase Mode. Of course, the mode switch can
immediately
followed by two digits 01,02,05,
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
channels will be controlled by one DMX channel.
will be controlled by one DMX channel, channel 3 and 4 will be
controlled by one DMX channel, and so forth, channel 9 and 10 will be
5 will be controlled by one DMX channel and channel 6
controlled
by one DMX channel.
followed by three digits 001
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
Once you have activated the DMX Mode as step 1, you can use
select your desired DMX address from 001
-512.
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
in programs except for Auto and Ful
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set
STRIP BLINDER TWIST
has two different operation modes. It can be used a 10 channel chaser or as a
Please follow illustrations below to
operate
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
mmer and DMX address
followed by three digits in the LED.
means the DMX Mode has been activated at present. If
“P”
appears in the LED display, means you are
immediately
realize on your fingertips by tapping the
followed by two digits 01,02,05,
10. You
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
channels will be controlled by one DMX channel.
will be controlled by one DMX channel, channel 3 and 4 will be
controlled by one DMX channel, and so forth, channel 9 and 10 will be
controlled
5 will be controlled by one DMX channel and channel 6
by one DMX channel.
followed by three digits 001
-
512. You can not
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
Once you have activated the DMX Mode as step 1, you can use
the
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
in programs except for Auto and Ful
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set
STRIP BLINDER TWIST
has two different operation modes. It can be used a 10 channel chaser or as a
operate
the unit in your desired mode.
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
mmer and DMX address
.
followed by three digits in the LED.
“A”
stands for DMX Address and
appears in the LED display, means you are
realize on your fingertips by tapping the
10. You
cannot
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
channels will be controlled by one DMX channel.
will be controlled by one DMX channel, channel 3 and 4 will be
controlled
by another.
5 will be controlled by one DMX channel and channel 6
by one DMX channel.
512. You can not
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
“UP” and “
DOWN
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
in programs except for Auto and Ful
l. Of course, you can select any of
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set
STRIP BLINDER TWIST
has two different operation modes. It can be used a 10 channel chaser or as a
the unit in your desired mode.
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
stands for DMX Address and
appears in the LED display, means you are
realize on your fingertips by tapping the
cannot
use the “
MENU
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
will be controlled by one DMX channel, channel 3 and 4 will be
by another.
5 will be controlled by one DMX channel and channel 6
-10 will b
e controlled
512. You can not
use the “
MENU
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
DOWN
” arrow
buttons to
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
l. Of course, you can select any of
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set
STRIP BLINDER TWIST
the unit in your desired mode.
Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you
stands for DMX Address and
appears in the LED display, means you are
realize on your fingertips by tapping the
MENU
”
button to select the Channel Mode unless you have called up the DMX Operation Mode as in step 1.
will be controlled by one DMX channel, channel 3 and 4 will be
e controlled
MENU
”
button to select the DMX Address Mode unless you have activated the DMX Mode as step 1. This mode
buttons to
se the operation mode only when you are about to use your unit as a channel chaser among of the 01, 02, 05,
l. Of course, you can select any of
programs to chase for a more dramatic lighting show, and you can also control the speed at which the set

1.
Selecting the Chase Mode:
Chase Mode is indicated by
Chase
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
the mode switch can
2.
Setting your desired Chase Program:
Once you have activ
to change your selected chase program. T
two digits 01
3.
Selecting the Chase Speed Mode:
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
LED.
4.
Setting your desired Chase Speed:
I
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
(approx.1/10
30 sec
5.
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
the LED.
6.
Setting y
Use the
000 will give you
5.
Technical
POWER REQUIREMENT
POWER CONSUMPTION
LAMP
HOUSING
ING
RESS PROTECTION RATING
CONTROL
OPER
ATING TEMPERATURE
S
TORAGE TEMPEARTURE
DIMENSIONS
WEIGHT
Please note:
change without any prior notice.
Selecting the Chase Mode:
Chase Mode is indicated by
Chase
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
the mode switch can
Setting your desired Chase Program:
Once you have activ
to change your selected chase program. T
two digits 01
-
16 or only
Selecting the Chase Speed Mode:
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
LED.
“SP”
stands for the chase speed.
Setting your desired Chase Speed:
I
n this mode, you can adjust the program chase speed. Use the
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
(approx.1/10
th
30 sec
ond）.
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
the LED.
“d”
stands for the chase dimmer.
Setting y
our desired Intensity:
Use the
“UP”
and
000 will give you
Technical
Specifications
POWER REQUIREMENT
POWER CONSUMPTION
LAMP
HOUSING
RESS PROTECTION RATING
CONTROL
ATING TEMPERATURE
TORAGE TEMPEARTURE
DIMENSIONS
WEIGHT
Please note:
Specifications and improvements in the design of this product and this manual are subject to
change without any prior notice.
Selecting the Chase Mode:
Chase Mode is indicated by
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
the mode switch can
immediate
Setting your desired Chase Program:
Once you have activ
ated the Chase Mode as in step1, you can use
to change your selected chase program. T
16 or only
“
AUTO
Selecting the Chase Speed Mode:
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
stands for the chase speed.
Setting your desired Chase Speed:
n this mode, you can adjust the program chase speed. Use the
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
th
of a second). While a set value of 01 will give you the slowest chase speed
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
stands for the chase dimmer.
our desired Intensity:
and
“DOWN”
000 will give you
the
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications
POWER REQUIREMENT
POWER CONSUMPTION
LAMP
HOUSING
RESS PROTECTION RATING
CONTROL
ATING TEMPERATURE
TORAGE TEMPEARTURE
-
DIMENSIONS
1256(L) x60(W) x135(H)mm
WEIGHT
Specifications and improvements in the design of this product and this manual are subject to
change without any prior notice.
Selecting the Chase Mode:
Chase Mode is indicated by
“P”
followed by two digits.
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
immediate
ly realize on your fingertips by tapping the
Setting your desired Chase Program:
ated the Chase Mode as in step1, you can use
to change your selected chase program. T
AUTO
” & “FULL
”
Selecting the Chase Speed Mode:
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
stands for the chase speed.
Setting your desired Chase Speed:
n this mode, you can adjust the program chase speed. Use the
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
of a second). While a set value of 01 will give you the slowest chase speed
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
stands for the chase dimmer.
our desired Intensity:
arrow buttons to
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications
:
POWER REQUIREMENT
AC230V,50Hz
POWER CONSUMPTION
750W
10*Gu10 230V/75W
Metal shell with power finishing
RESS PROTECTION RATING
IP20
DMX
-
ATING TEMPERATURE
0 degC to +
-
20degC TO +70 degC
1256(L) x60(W) x135(H)mm
6kgs
Specifications and improvements in the design of this product and this manual are subject to
6 / 8
followed by two digits.
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
appears in the LED display, means you are in
the
DMX mode.
ly realize on your fingertips by tapping the
ated the Chase Mode as in step1, you can use
to change your selected chase program. T
h
e chase pattern is displayed in the
”
appears. You can select any of
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
Chase Mode as step1, press and hold the
“MENU”
button until
n this mode, you can adjust the program chase speed. Use the
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
of a second). While a set value of 01 will give you the slowest chase speed
Selecting the Intensity (Dimming) Mode:
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
Chase Mode as in step 1, press and hold
the “MENU”
stands for the chase dimmer.
arrow buttons to
adjust
the
weakest output intensity and a set value of 100 will give you the full intensity.
AC230V,50Hz
750W
10*Gu10 230V/75W
Metal shell with power finishing
-
512 (1990)
0 degC to +
55
degC
20degC TO +70 degC
1256(L) x60(W) x135(H)mm
Specifications and improvements in the design of this product and this manual are subject to
STRIP BLINDER TWIST
followed by two digits.
“P”
stands for C
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
DMX mode.
“A”
stands for DMX address. Of course,
ly realize on your fingertips by tapping the
ated the Chase Mode as in step1, you can use
the
e chase pattern is displayed in the
appears. You can select any of
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
button until
“SP”
n this mode, you can adjust the program chase speed. Use the
“
UP
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
of a second). While a set value of 01 will give you the slowest chase speed
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
button until
“
d
the
light
output intensity from 000
weakest output intensity and a set value of 100 will give you the full intensity.
10*Gu10 230V/75W
Metal shell with power finishing
degC
1256(L) x60(W) x135(H)mm
Specifications and improvements in the design of this product and this manual are subject to
STRIP BLINDER TWIST
stands for C
h
ase program and means the
Mode has been activated at present, and you have also activated the Chase Program Mode. After
activating the Chase Mode, the Chase Program Mode starts initially and
is the
default se
stands for DMX address. Of course,
ly realize on your fingertips by tapping the
“
MODE
the
“UP” and
“
e chase pattern is displayed in the
LED by “
appears. You can select any of
them
to run at a
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
followed by two digits appears in the
UP
” and “
DOWN
adjust the chase speed from 01 thru 99. A value of 99 will give you the fastest
chased
of a second). While a set value of 01 will give you the slowest chase speed
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
d
”
followed by three digits appears in
output intensity from 000
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications and improvements in the design of this product and this manual are subject to
STRIP BLINDER TWIST
ase program and means the
Mode has been activated at present, and you have also activated the Chase Program Mode. After
default se
tting. If
stands for DMX address. Of course,
MODE
” button.
“
DOWN”
arrow button
LED by “
P”
followed by
to run at a
single
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
followed by two digits appears in the
DOWN
”
arrow buttons to
chased
speed
of a second). While a set value of 01 will give you the slowest chase speed
（
once every
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
followed by three digits appears in
output intensity from 000
-
100. A set value of
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications and improvements in the design of this product and this manual are subject to
STRIP BLINDER TWIST
ase program and means the
Mode has been activated at present, and you have also activated the Chase Program Mode. After
tting. If
“A”
stands for DMX address. Of course,
arrow button
followed by
single
time.
To adjust the Chase Speed, you must activate the Chase Speed Mode. Of course, only while in the
followed by two digits appears in the
arrow buttons to
once every
To adjust the output intensity, you must activate the Chase Dimmer Mode. Of course, only when in the
followed by three digits appears in
100. A set value of
weakest output intensity and a set value of 100 will give you the full intensity.
Specifications and improvements in the design of this product and this manual are subject to

6.
Handling
Take care to open the adjustment screw before adjusting
Avoid an excessive load on the material tha
Furthermore you should make sure that you do not stress the joints and connections
too much during the transportation and the mounting.
Handling
Take care to open the adjustment screw before adjusting
Avoid an excessive load on the material tha
Furthermore you should make sure that you do not stress the joints and connections
too much during the transportation and the mounting.
Take care to open the adjustment screw before adjusting
Avoid an excessive load on the material tha
Furthermore you should make sure that you do not stress the joints and connections
too much during the transportation and the mounting.
Take care to open the adjustment screw before adjusting
Avoid an excessive load on the material tha
Furthermore you should make sure that you do not stress the joints and connections
too much during the transportation and the mounting.
7 / 8
Take care to open the adjustment screw before adjusting
Avoid an excessive load on the material tha
t could lead to material failure.
Furthermore you should make sure that you do not stress the joints and connections
too much during the transportation and the mounting.
STRIP BLINDER TWIST
Take care to open the adjustment screw before adjusting
the angle of inclination.
t could lead to material failure.
Furthermore you should make sure that you do not stress the joints and connections
too much during the transportation and the mounting.
STRIP BLINDER TWIST
the angle of inclination.
t could lead to material failure.
Furthermore you should make sure that you do not stress the joints and connections
STRIP BLINDER TWIST
the angle of inclination.
Furthermore you should make sure that you do not stress the joints and connections
STRIP BLINDER TWIST

B&
K Braun GmbH
Industriestraße 1
D-
76307 Karlsbad
www.bkbraun.com
[e-mail]
8 / 8
Importer:
K Braun GmbH
Industriestraße 1
76307 Karlsbad
-
Ittersbach
www.bkbraun.com
[e-mail]
STRIP BLINDER TWIST
K Braun GmbH
Industriestraße 1
Ittersbach
www.bkbraun.com
[e-mail]
STRIP BLINDER TWIST
Ittersbach
STRIP BLINDER TWIST
STRIP BLINDER TWIST