Iiglo II-HD4SPLDA14-B User manual

Instruction
Manual
II-HD4SPLDA14-B
HDMI Splitter

All Rights Reserved
Version: CE-DA14-H2_2020V1.2
Statement
Thanks for purchasing this product, please read this
user manual carefully before using this product. The
functions described in this version are updated till
October, 2019. In the constant effort to improve our
product, we reserve the right to make functions or
parameters changes without notice or obligation.
Safety Precaution
●Do not dismantle the housing or modify the
module to avoid electrical shock or burn.
●Using supplies not meeting the products’
specications may cause damage, deterioration
or malfunction.
●Do not expose the unit to rain, moisture or install
this product near water.
●Install the device in a place with ne ventilation.
●Do not twist or pull by force ends of the optical
cable. It can cause malfunction.
●Do not use liquid or aerosol cleaners to clean
this unit.

●Always unplug the power to the device before
cleaning.
●Unplug the power when not used for a long period
of time.
●Refer all servicing to qualied service personnel.
After-sales Service
We provide limited warranty for the product within
three years.
Packing List
●1x 1x4 HDMI 2.0 Splitter
●1x Power Adapter (5V DC 1A)
●1x User Manual
Note:
Please contact your distributor immediately
if any damage or defect in the components is
found.

Product Introduction
HDMI splitter for A/V solutions. This device lets
you simultaneously distribute one HDMI signal up
to 4 displays. It supports HDMI v. 2.0 standards
and resolutions up to 4K@60Hz 4:4:4. The splitter
supports rmware upgrade through Micro-USB port.
Panel Description
1. POWER LED: Red light appears when device is
powered on.
2. HDMI INPUT LED: Blue light indicates a
connected HDMI input device.
3. HDMI INPUT: Type-A female HDMI input port to
connect the HDMI source.
4. Downscale ON/OFF: Enable/disable down-
scaling function.
5. FW/DC 5V: Micro USB port for rmware
upgrades or power connection.
6. OUTPUT LEDS: Blue lights indicate connected
HDMI outputs.
7. HDMI OUTPUTS: Four type-A female HDMI
output ports to connect HDMI displays.

System Connection

Video Resolution Down-scaling
The product supports video resolution down-scaling,
the 4K input can be automatically degraded to
1080p output for compatibility with 1080p display,
shown in the below chart.
Input Output
# Resolution Refresh Color
space Downscale 1080p Specs
1 3840x2160 60Hz 4:4:4 Support 1080p@60Hz
4:4:4
2 3840x2160 30Hz 4:4:4 Support 1080p@30Hz
4:4:4
3 3840x2160 24Hz 4:4:4 Support 1080p@24Hz
4:4:4
4 3840x2160 60Hz 4:2:0 Support 1080p@60Hz
4:4:4
5 3840x2160 30Hz 4:2:0 Support 1080p@30Hz
4:4:4
6 3840x2160 24Hz 4:2:0 Support 1080p@24Hz
4:4:4
7 3840x2160 60Hz 4:2:2 Not Support N/A
8 3840x2160 30Hz 4:2:2 Not Support N/A
9 3840x2160 24Hz 4:2:2 Not Support N/A

Firmware Upgrade
Here are the steps to install rmware upgrades
using the Micro-USB port:
1) Connect the splitter to the PC with USB cable.
2) Power on the splitter, and then the PC
will automatically detect a U-disk named of
“BOOTDISK”.
3) Double-click to open the U-disk, a le named of
“READY.TXT” will be showed.
4) Copy the latest upgrade le (.bin) to the
“BOOTDISK” U-disk directly.
5) If the lename “READY.TXT” automatically turns
to “SUCCESS.TXT”, the rmware was upgraded
successfully. If the rmware upgrade failed, please
check the le (.bin) and then follow the above
procedure to operate again.
6) Remove the USB cable after rmware upgrade.

Specication
Video Input
Input (1) HDMI
Input Connector (1) Type-A female HDMI
HDMI Input
Resolution Up to 4K@60Hz 4:4:4 8bit
HDMI Standard 2.0
HDCP Version up to HDCP2.3
CEC Supported
Video Output
Output (2) HDMI
Output Connector (2) Type-A female HDMI
HDMI Output
Resolution Up to 4K@60Hz 4:4:4
CEC Supported
Control
Control Part (1) Micro-USB port
General
HDMI 2.0 Cable
Length
4K@60Hz 4:4:4 ≤5m,
4K@60Hz 4:2:0 ≤10m,
1080p ≤15m
Operation
Temperature -10°C ~ +55°C
Storage
Temperature -25°C ~ +70°C
Relative Humidity 10%-90%
Power Supply Input: 100V~240V AC;
Output: 5V DC 1A
Power Consumption 1.8W
Dimension (W*H*D) 85mm x 18mm x 85mm
Net Weight 70g

Imported by iiglo, Østre Kullerød 4,
N-3241 Sandefjord, Norway
www.iiglo.com | Made in China