Iiyama ProLite E1902WSV User manual

USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through this
brief but comprehensive manual
before installing and switching on the
monitor. Please keep this manual in a
safe place for your future reference.
ENGLISH
ENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS

ENGLISH
Congratulations!
The product you have just purchased carries the TCO’06 Media
Displays label. This means that your display is designed and
manufactured according to some of the strictest performance
and environmental criteria in the world. The manufacturer of this
display has selected it to be certified to TCO’06 Media Displays
as a sign of usability, high performance and reduced impact on
the natural environment.
Products certified to TCO´06 Media Displays are specifically designed for high quality
reproduction of moving images. Features such as luminance, color rendition and response
time are important when watching TV or working with media, graphics, web design and other
applications that demand outstanding moving images. *
Other features of TCO’06 Media Displays :
Ergonomics
• Good visual ergonomics and image quality in order to reduce vision and strain problems.
Criteria for luminance, contrast, resolution, reflectance, color rendition and response time.
Energy
• Energy saving mode – beneficial both for the user and the environment
• Electrical safety
Emissions
• Low electromagnetic fields surrounding the display
Ecology
• Product is designed for recycling. Manufacturer must have a certified environmental
management system such as EMAS or ISO 14 001
• Restrictions on
o Chlorinated and brominated flame retardants and polymers
o Hazardous heavy metals such as cadmium, mercury, hexavalent chromium and lead.
All TCO labelled products are verified and certified by TCO Development, an independent
third party labelling organization. For over 20 years, TCO Development has been at the
forefront of moving the design of IT equipment in a more user-friendly direction. Our criteria
are developed in collaboration with an international group of researchers, experts, users and
manufacturers. Since the program’s inception, TCO labelled products have grown in
popularity and are now requested by users and IT-manufacturers all over the world.
Full specifications and lists of certified products can be found on our homepage –
www.tcodevelopment.com
* For a display used primarily for conventional work tasks such as word processing, we recommend
a display certified to our office display series TCO’03 Displays or later version.

ENGLISH
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a high
performance product, designed with the user in focus that also
minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
• Good visual ergonomics and image quality in order to improve the working environment for the
user and to reduce sight and strain problems. Important parameters are luminance, contrast,
resolution, reflectance, colour rendition and image stability.
Energy
• Energy-saving mode after a certain time – beneficial both for the user and the environment
• Electrical safety
Emissions
• Electromagnetic fields
• Noise emissions
Ecology
• The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 001
• Restrictions on
o chlorinated and brominated flame retardants and polymers
o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in cooperation
with scientists, experts, users as well as manufacturers all over the world. Since the end of the
1980s TCO has been involved in influencing the development of IT equipment in a more user-
friendly direction. Our labelling system started with displays in 1992 and is now requested by users
and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com

ENGLISH
FCC DECLARATION OF CONFORMITY
Model Number: PL1902 / PL1902W
Trade Name: iiyama
Responsible party: Ampronix Inc.
Address: 8697 Research Dr. Irvine, CA.92618 U.S.A.
Telephone number: 949-788-9930
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Class B Personal Computers and
peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the device is operated in a residential environment. This device generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If you determine the device does cause harmful interference to radio
or television reception (this may be determined by monitoring the interference while turning the device off and
on), you are encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTION Changes or modifications not expressly approved by iiyama could void the users authority
to operate the device under FCC compliance regulations.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,
business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
All places of operation are characterised by their connection to the public low voltage power supply system.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the radio interference regulation of the Canadian department of communications.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE
STATEMENT
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR®Partner, iiyama has determined that this product meets the ENERGY STAR®guidelines for
energy efficiency.

ENGLISH
TABLE OF CONTENTS
FORYOURSAFETY...................................................................................................... 1
SAFETYPRECAUTIONS ......................................................................................... 1
SPECIALNOTESONLCDMONITORS..................................................................... 3
CUSTOMERSERVICE .............................................................................................. 3
CLEANING ............................................................................................................... 3
BEFOREYOUOPERATETHEMONITOR........................................................................ 4
FEATURES ............................................................................................................... 4
CHECKINGTHECONTENTSOFTHEPACKAGE ..................................................... 5
FITTINGANDREMOVALOF BASE :ProLiteE1902S/ E1902WS / E1902WSV..... 6
CONTROLSAND CONNECTORS:ProLiteE1902S/E1902WS/ E1902WSV........ 7
CONTROLSANDCONNECTORS:ProLiteB1902S ................................................ 8
CONNECTINGYOURMONITOR: ProLite E1902S /E1902WS/E1902WSV.......... 9
CONNECTINGYOURMONITOR:ProLiteB1902S ..................................................10
COMPUTERSETTING ...............................................................................................11
ADJUSTINGTHEVIEWINGANGLE:ProLiteE1902S/E1902WS/E1902WSV.....11
ADJUSTINGTHEHEIGHTANDTHEVIEWINGANGLE:ProLiteB1902S ................12
PANELROTATION:ProLiteB1902S .......................................................................12
OPERATINGTHEMONITOR ...........................................................................................13
ADJUSTMENTMENUCONTENTS ............................................................................14
SCREENADJUSTMENTS .........................................................................................22
POWERMANAGEMENTFEATURE ..........................................................................25
TROUBLESHOOTING ....................................................................................................26
APPENDIX ......................................................................................................................28
SPECIFICATIONS:ProLiteE1902S .........................................................................28
SPECIFICATIONS:ProLiteE1902WS ......................................................................29
SPECIFICATIONS:ProLiteE1902WSV ...................................................................30
SPECIFICATIONS:ProLiteB1902S .........................................................................31
DIMENSIONS:ProLiteE1902S ................................................................................32
DIMENSIONS:ProLiteE1902WS/ E1902WSV.......................................................32
DIMENSIONS:ProLiteB1902S................................................................................32
COMPLIANTTIMING.................................................................................................33
CONNECTORPINASSIGNMENT ..............................................................................34
We recommend recycling of used product. Please contact your dealer or iiyama service
center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of different countries from there.
Regulatory information : The high efficiency LCD backlights used in this
product contains 5mg or less of Mercury, the disposal of which may be
regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or
the Electronic IndustriesAlliance (www.eiae.org).
This information is only for U.S.A..

ENGLISH
1 FOR YOUR SAFETY
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ONA FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS

ENGLISH
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field
produced by the speakers if the disks are placed on or near the speakers.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For
optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
FOR YOUR SAFETY 2

ENGLISH
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture
position to the correct position.

Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing the image or turning off the
Power Switch for hours.

You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.

SPECIAL NOTES ON LCD MONITORS
Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.

Due to the nature of the backlight, the screen may flicker during initial use. Turn off
the Power Switch and then turn it on again to make sure the flicker disappears.

NOTE The fluorescent light used in the LCD monitor may have to be periodically replaced.
For the warranty coverage on this component, please check with local iiyama
service center.
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.


WARNING If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.

CAUTION For safety reasons, turn off the power switch and unplug the monitor before you
clean it.

NOTE To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.

Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.

CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then
wipe the cabinet with a soft dry cloth.
LCD
SCREEN Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
3 FOR YOUR SAFETY

ENGLISH
BEFORE YOU OPERATE THE MONITOR
FEATURES


48cm (19") TFT Color LCD Monitor


Supports Resolutions up to 1280 × 1024 : ProLite E1902S / B1902S


Supports Resolutions up to 1440 × 900 : ProLite E1902WS / E1902WSV


High Contrast 1000:1 / High Brightness 300cd/m2 / Quick Response Time 2ms
(Gray to Gray): ProLite E1902S / B1902S


High Contrast 1000:1 / High Brightness 400cd/m2 / Quick Response Time 2ms
(Gray to Gray) : ProLite E1902WS / E1902WSV


Multi-Color Control
Supports sRGB International Standard


Gamma Control
Clear Display for Moving Pictures & Photographs


Digital Character Smoothing


Automatic Set-up


Stereo Speakers
2 × 1W Stereo Speakers & Headphone Connector


Economy Mode
Reduced Power Consumption


Plug & Play VESA DDC2B Compliant
Windows®95/98/2000/Me/XP/Vista Compliant


DDC/CI Compliant


Power Management (ENERGY STAR®and VESADPMS Compliant)


Ergonomic Design
ProLite E1902S / B1902S : TCO ’03 and TÜV-ErgonomicsApproved
ProLite E1902WS / E1902WSV : TCO ’06 and TÜV-ErgonomicsApproved


Digital Input (DVI-D, HDCP Compliant) for Clear Display


90° Panel Rotation Design : ProLite B1902S


VESA Mounting Standard (100mm×100mm) Compliant
BEFORE YOU OPERATE THE MONITOR 4
Please stand the monitor and then remove the
stopper on the back of the stand slowly.
[Stopper] : ProLite B1902S

ENGLISH
5 BEFORE YOU OPERATE THE MONITOR
CAUTION *1The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used.
However, all guarantees and warranties are void for any problems or damage
caused by a power cable not supplied by iiyama.
Power Cable *1D-Sub Signal Cable
DVI-DSignal Cable *2Audio Cable
Stand *3Cable Holder
User Manual
The following accessories are included in your package. Check to see if they are enclosed with the
monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama
office.
CHECKING THE CONTENTS OF THE PACKAGE
*2Accessory for ProLite E1902S / E1902WS / B1902S
*3Accessory for ProLite E1902S / E1902WS / E1902WSV
<softOSM>
The Desktop softOSM software complies with the DDC/CI standard and can be downloaded from the
iiyama website. www.iiyama.com
softOSM Software Functions
Easy access to the range of user adjustments can be via the softOSM Software rather than the
buttons located on the display itself.
The communication between software and display occurs through the Display Cable provided;
hence no special cabling is required.
Screen rotation features can also be controlled via the softOSM Software switching on the fly
between Landscape and Portrait. Please note that a suitable graphics card with adequate
performance must be used in conjunction with this feature. : Available for ProLite B1902S only.
Compatible with Windows 98, 2000, XP and Vista.

ENGLISH
FITTING AND REMOVAL OF BASE :
ProLite E1902S / E1902WS / E1902WSV
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.

CAUTION
Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before installation to avoid electric shock or damage.

<Install>
<Remove>
Hold the monitor and push the post down
into the stand.
Press the stopper at the back of the stand
and remove the stand from the post.
Stand
Press the stopper
BEFORE YOU OPERATE THE MONITOR 6

ENGLISH
CONTROLS AND CONNECTORS :
ProLite E1902S / E1902WS / E1902WSV
AMenuButton(MENU)
B+ Button ( )
CPower Switch ( )
D– Button ( )
EAuto Button (AUTO)
FPower Indicator
Blue: Normaloperation
Orange: Power Management
Auto (Signal Select)
When no signal is received from the system, the display enters into its
Power Management Mode reducing power consumption to < than 2W.
Analog / Digital (Signal Select)
The monitor enters into power management mode which reduces the power
consumption to less than 2W when receiving no horizontal and/or vertical
sync signal.
GSpeakers
HAC Connector (AC IN)
IAudio Connector ( )
JDVI-D 24pin Connector (DVI-D)*
KD-sub mini 15pin Connector (D-SUB)
LKeyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
<Front> <Back>
NOTE
NOTE
7 BEFORE YOU OPERATE THE MONITOR
*Available for ProLite E1902S / E1902WS only.

ENGLISH
BEFORE YOU OPERATE THE MONITOR 8
CONTROLS AND CONNECTORS : ProLite B1902S
AMenuButton(MENU)
B+ Button ( )
CPower Switch ( )
D– Button ( )
EAuto Button (AUTO)
FPower Indicator
Blue: Normaloperation
Orange: Power Management
Auto (Signal Select)
When no signal is received from the system, the display enters into its
Power Management Mode reducing power consumption to < than 2W.
Analog / Digital (Signal Select)
The monitor enters into power management mode which reduces the power
consumption to less than 2W when receiving no horizontal and/or vertical
sync signal.
GSpeakers
HAC Connector (AC IN)
IAudio Connector ( )
JDVI-D 24pin Connector (DVI-D)
KD-sub mini 15pin Connector (D-SUB)
LKeyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
NOTE
NOTE
<Front> <Back>

ENGLISH
Audio Cable (Accessory) Computer
D-Sub Signal Cable
(Accessory)
DVI-D Signal Cable*
Power Cable
(Accessory)
CONNECTING YOUR MONITOR :
ProLite E1902S / E1902WS / E1902WSV
[Example of Connection]
AEnsure that both the computer and the monitor are switched off.
BConnect the computer to the monitor with the signal cable. (See page 34 for CONNECTOR PIN
ASSIGNMENT.)
CConnect the monitor to the audio equipment with theAudio Cable when using the audio features.
DConnect the Power Cable to the monitor first and then to the power supply.
NOTE The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.
If a special cable is required please contact your local iiyama dealer or regional iiyama office.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.
Make sure you tighten the finger screws at each end of the signal cable.
<Back>
*Available for ProLite E1902S / E1902WS only.
[ Fitting of Cable Holder ]
ACollect cables at the back of the stand.
BPosition the Cable Holder at the base of the
stand column by inserting the ‘tabs’ into the
guide holes. Apply gentle pressure downwards
to secure.
[ Removal of Cable Holder ]
ARemove Cable Holder by sliding up the base
column.
ÃáâìåÈïìäåò
Stand
9 BEFORE YOU OPERATE THE MONITOR

ENGLISH
BEFOREYOU OPERATETHE MONITOR 10
CONNECTING YOUR MONITOR : ProLite B1902S
[Example of Connection]
AEnsure that both the computer and the monitor are switched off.
BConnect the computer to the monitor with the signal cable. (See page 34 for CONNECTOR PIN
ASSIGNMENT.)
CConnect the monitor to the audio equipment with the Audio Cable when using the audio features.
DConnect the Power Cable to the monitor first and then to the power supply.
NOTE The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.
If a special cable is required please contact your local iiyama dealer or regional iiyama office.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.
Make sure you tighten the finger screws at each end of the signal cable.
<Back>
[ Fitting of Cable Holder ]
ACollect cables at the back of the stand.
BInserting the tabs of the Cable Holder into guide
holes of the stand.(B)
CPlace the Cable Holder by inserting the tabs of
the Cable Holder into guide holes of the
stand.(C)
[ Removal of Cable Holder ]
APush the both sides and tilt back the Cable
Holder.
Audio Cable (Accessory) Computer
D-Sub Signal Cable
(Accessory)
DVI-D Signal Cable
(Accessory)
Power Cable
(Accessory)

ENGLISH
ADJUSTING THE VIEWING ANGLE :
ProLite E1902S / E1902WS / E1902WSV
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 20 degrees
upward, 5 degrees downward.
In order to ensure a healthy and relaxed body position when
using the monitor at visual display workstations, it is
recommended that the adjusted tilt angle should not exceed
10 degrees.Adjust the monitor’s angle to your own preference.
NOTE Do not touch the LCD screen when you change the
angle.It may cause damageorbreak the LCD screen.
Careful attention is required not to catch your fingers
or hands when you change the angle.
NOTE
COMPUTER SETTING
SignalTiming
Change to the desired signal timing listed on page 33: COMPLIANTTIMING.
Windows 95/98/2000/Me/XP/Vista Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with
theSignalCablesupplied. Windows 95/98/2000/Me/XPMonitor Information File for iiyama monitors
may be necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
For additional information on how to download the driver for your monitor, please
access one of the internet sites noted above.
Monitor Drivers are not required in most cases for Windows Vista, Macintosh or Unix
operating systems. For further information, please contact your computer dealer first
for advice.
20
5
11 BEFOREYOUOPERATETHE MONITOR

ENGLISH
BEFOREYOU OPERATETHE MONITOR 12
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1902S
Foroptimal viewing it is recommendedto look atthe
full face of the monitor, then adjust the monitor's
Height and angle to your own preference.
Hold the stand so that the monitor does not topple
when you change the monitor’s angle.
you are able to adjust the monitor's height up to
110mm,angle up to 35degrees right and left,25
degrees upward,5 degrees downward.
NOTE Do not touch the LCD screen when you
change the angle. It may cause damage or
break the LCD screen.
Careful attention is required not to catch
your fingers or hands when you change
the angle.
PANEL ROTATION : ProLite B1902S
AAjust the monitor's height to the maximum.
BRotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
 Attempting to rotate without fully
extending upward may cause
damage to stand.
Screen Rotation should be
accessed via the softOSM
software.
CAjust the monitor's angle to your preference.
NOTE
110mm

ENGLISH
13 OPERATING THE MONITOR
The bar shows
the progress of the
adjustment being made.
+
–
50
V-Position
Menu:1
1280 × 1024
H:80.0KHz V:75.0Hz
OPERATING THE MONITOR
Tocreatethe best picture,your iiyama LCD monitorhas been presetat the factory withthe COMPLIANT
TIMING shown on page 33. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS.
((
((
(Press the Menu Button to start the On Screen Display feature. There are
additional Menu pages which can be switched by using the +/– Buttons.
BB
BB
BSelect the Menu page which contains the adjustment icon relating to the
adjustment you want to make. Press the Menu Button again. Then, use the
+/– Buttons to highlight the desired adjustment icon. Press the Menu Button
again.
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Off Timer has passed. The Auto Button can be used to exit OSD window
immediately.

NOTE
An adjustment scale appears after you press the Menu Button. Use the +/– Buttons to change the
verticalposition settings. The verticalpositionof the overalldisplayshould be changing accordingly
while you are doing this.
CC
CC
CUse the +/– Buttons to make the appropriate adjustment or setting.
Adjustments for Clock, Phase and Position are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.

For example, to correct for vertical position, select Menu page number 1 and then press the Menu
Button. Then, select (V-Position) by using the +/– Buttons.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.

Adjustment icon
Current horizontal frequency,
vertical refresh rate
and resolution
1280 × 1024
H:80.0KHz V:75.0Hz
Menu:1 Page no.
sRGB 1
LOCK
Displayed while Economy Mode is active.
Displayed while sRGB is active. Displayed while Mute is active. Displayed while Lock Out is active.

ENGLISH
ADJUSTMENT MENU CONTENTS
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
Brightness / Contrast / Volume: To display direct menu press either of the +/- Buttons. Continue
to use the +/- Buttons to select the adjustments required.
Auto Set-up: Press the Auto Button when the Menu is not displayed.
Volume (Mute): With the OSD menu off, the pressing and holding of the Menu Button for 1-2
seconds will enable/disable the Audio Mute facility.
Signal Select *: With the OSD menu off, pressing and holding theAuto Button for 1-2 seconds will
switch the input signal from Analogue to Digital.
Lock Out: With the OSD menu off, pressing and holding the Menu and ‘-‘ Buttons
simultaneously for a period of at least 7 seconds will enable and disable the OSD
Lock Out mode.
is displayed while Lock Out is active.
Direct
OPERATING THE MONITOR 14
*Available for ProLite E1902S / E1902WS / B1902S only.

ENGLISH
15 OPERATING THE MONITOR
Menu:1
1280 × 1024
H:80.0KHz V:75.0Hz
AdjustmentItem Problem / Option Button to Press
Too dark
Too bright
Brightness *1
Contrast Too dull
Too intense
To correct flickering text or lines
Clock *2
Phase *2
H-Position Too far to the left
Too far to the right
V-Position Too low
Too high
Return to Menu Highlight “Menu : 1” again.
To correct flickering text or lines
Direct
Direct
*1Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*2Seepage22forSCREENADJUSTMENTS.
Menu : 1
(Analog)
Analog Input
See page 14 for Direct adjustment.
Direct