IKEA 102.261.26 Operating and installation instructions

SERVICE Whirlpool EMEA
Customer Services 102.261.26
Service Information
Microwave oven Mini-BI
102.261.26
8587 773 53771
Last Modification: 26/01/12
Creation Date: 11/01/12
Spare Part List 2
Exploded View 3
Technical Data 4
Safety Instructions 5
Wiring Diagram 7
This document is only intended for qualified technicans who are aware of the
respective safety regulations.
Subject to modifications
© Whirlpool EMEA www.scc-service.com

SERVICE Whirlpool EMEA
Customer Services
8587 773 53771, 26/01/12
page 2 of 7
Spare Part List
Pos 12NC Description
0221 4801 201 00879 Batten left
0222 4801 201 00881 Batten right
0411 4810 689 78541 Hinge MIDI Ass. 270 L
0412 4810 689 78551 Hinge MIDI Ass. 270 R
1000 4801 201 01055 Oven door assembly Black
1170 4819 498 78366 Handle crisp plate
1300 4801 201 00673 Door lock
1305 4801 201 00677 Spring,tension
1308 4801 201 00675 Plate cam
2441 4801 817 00016 Lid plastic diam 27 cm
2460 4801 201 00687 Crisp plate
2550 4819 418 79728 Turntable glass
2640 4810 104 22374 Turntable ring
2641 4819 462 38767 Crosspiece
3200 4801 201 01798 Panel control INOX
3320 4801 201 01052 button assembly
4040 4801 201 00525 Magnetron 2M236-M62J1Y PANASONIC
4060 4810 678 48981 Motor TT
4210 4801 201 00526 Filter,mains board
4410 4801 201 00527 Motor fan
4520 4801 201 01049 Heating element 400W 120V
4900 4801 201 01048 Cable mains
5000 4801 201 01795 Control board
5060 4801 201 01758 Power unit, APCB POWER GR CR MIDI IK G2
5270 4810 104 69885 Platine INVERTER GN-UWP3G PANASONIC
5610 4801 201 00531 Thermostat 130 °C
5620 4801 201 00003 Thermostat 165°C
6330 4801 201 00814 Microswitch
6520 4819 134 28051 Lamp MWO 25W 240V
6560 4801 201 01622 Lampholder MIBI MIDI
7740 4801 201 00672 Plate mica
© Whirlpool EMEA www.scc-service.com

SERVICE Whirlpool EMEA
Customer Services
8587 773 53771, 26/01/12
page 3 of 7
Exploded View
© Whirlpool EMEA www.scc-service.com

SERVICE Whirlpool EMEA
Customer Services
8587 773 53771, 26/01/12
page 4 of 7
Technical Data
Dimensions + Weight
Product dimensions
Height ..............................................................................................425mm
Width ...............................................................................................595mm
Depth ...............................................................................................468 mm
Cut-out dimensions
Height ........................................................................................380-420 mm
Width .........................................................................................556 - 568mm
Depth ...............................................................................................550 mm
Cavity dimensions
Height ..............................................................................................200mm
Width ...............................................................................................405mm
Depth ...............................................................................................380 mm
Volume ..................................................................................................31 l
Turntable diameter ..................................................................................325mm
Weight
net ....................................................................................................22 kg
Gross ...............................................................................................25.8 kg
Electrical base data
Voltage ...................................................................................................240V
Frequency ............................................................................................... 50 Hz
Power Consumption
Totalconnectedload ...................................................................................2300W
Microwave
Output power
max. .............................................................................................1000W
power levels ...............................................................................................8
Grill heating element .....................................................................................800 W
© Whirlpool EMEA www.scc-service.com

SERVICE Whirlpool EMEA
Customer Services
8587 773 53771, 26/01/12
page 5 of 7
Safety Instructions
INTRODUCTION
Before leaving the factory each oven is carefully checked.
It must, however, be installed and used correctly.
Despite all the steps taken to make the oven safe, the safety is dependent on the correct installation and the fact the
user understands how to use and maintain the oven.
The information in this section should be used as a reminder that the oven is safe and that anyone who uses it must
first read the instructions for use in order to be able to use the oven correctly and obtain best results.
SAFETY
To avoid injury to yourself and damage to the appliance always work to the following rules when servicing an oven.
Always disconnect the plug from the mains before starting work.
If there is no plug switch off the electric supply at the control box.
When you have finished servicing an oven before you reconnect it to the mains, make sure that:
– all the internal connections are correct
– the wires are insulated and not touching the door or the cabinet or anything sharp
– all the earth connections are electrically and mechanically sound
– do not modify or anyway interfere with the safety devices built-in to the oven
– make sure that each replacement part you use conforms to the manufacturer´s specifications
Do not start a repair if you have any doubt as to your ability to complete it.
CAUTION - MICROWAVE RADIATION
PERSONNEL SHOULD NOT BE EXPOSED TO THE MICROWAVE ENERGY WHICH MAY RADIATE FROM THE
MAGNETRON, WAVEGUIDE OR ANTENNA IF THEY ARE IMPROPERLY USED OR CONNECTED. ALL INPUT
AND OUTPUT MICROWAVE CONNECTIONS, WAVEGUIDES, FLANGES AND GASKETS MUST BE SECURE.
NEVER OPERATE THE DEVICE WITHOUT A MICROWAVE ENERGY ABSORBING LOAD ATTACHED.
NEVER LOOK INTO AN OPEN WAVEGUIDE OR ANTENNA WHILE THE DEVICE IS ENERGIZED.
NEVER OPERATE AN OVEN WITH CABINET OFF WITHOUT MEASURING THE MICROWAVE LEAKAGE
AROUND MAGNETRON AND VISIBLE MICROWAVE CONNECTIONS (WELDING JOINTS).
Do not operate the oven if the following conditions exist:
– the door does not close firmly against the door support because of the door being warped or the hinges damaged.
– The door trims or seals are damaged.
– If there is any visible damage to the oven.
– if the door does not close properly.
© Whirlpool EMEA www.scc-service.com

SERVICE Whirlpool EMEA
Customer Services
8587 773 53771, 26/01/12
page 6 of 7
Avoid operating the oven if known components in the interlock system, oven door or microwave
generating assembly are known defective. They must be replaced.
WARNING - HIGH VOLTAGE
IT IS POSSIBLE TO COME IN CONTACT WITH LETHAL HIGH VOLTAGE WHEN WORKING WITH HV TRANS-
FORMER, HV CAPACITOR AND MAGNETRON. THEREFORE NEVER TRY TO MEASURE THE HIGH VOLTAGE.
ALWAYS TAKE UTMOST CARE WHEN PERFORMING ELECTRIC MEASUREMENTS INSIDE THE OVEN.
© Whirlpool EMEA www.scc-service.com

SERVICE Whirlpool EMEA
Customer Services
8587 773 53771, 26/01/12
page 7 of 7
Wiring Diagram
© Whirlpool EMEA www.scc-service.com