Ikelite 4077.01 Specification sheet

Thank you for your purchase of Ikelite equipment. Please read this instruction
manual completely before attempting to operate or dive with this product.
Base Extension + Release Handles /
Base Extension
Product Numbers 4077.01, 4077.02, 4077.03
QTY. 1 = 0611.29 Base Extension
Bottom View
Top View
Side View
Qty. 2 = 0212.17 1/4” Thin Flat Washer
Qty. 2 = 0212.16 Other Plastic Washer
Qty. 2 = 0212.11 Split Lock Washer
Qty. 2 = 0212.1 Other Lock Washer
Qty. 2 = 0213.51
1/4-20 x 1/2 Socket Cap Screw
Qty. 1 = 1/8” Hex Head Wrench

2
x 2 x 2
9531.3 Left Quick
Release Handle
0213.51 1/4-20 x 1/2 Socket Cap Screw
0212.1 1/4” Split Lock Cap Washer
0212.16 1/4” Thin Flat Washer
0611.29 Aluminum DSLR Handle Extension
9531.4 Right Quick
Release Handle
Attach Base Extension with Handles to Base
(tighten with 1/8” hex head wrench)
© 2016 Ikelite Underwater Systems
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
ikelite.com
4077.01-02-03_Base_Extension_/_Handles_1-0316
1/8” Hex Head Wrench

3
4077.03 BASE EXTENSION for RELEASE HANDLE
INCLUDED IN KIT
x 2 x 2
Attach Base Extension with Handles to Base
(tighten with 1/8” hex head wrench)

LIMITED WARRANTY
This Ikelite product is warranted against any manufacturing defects for a
period of one (1) year from the original date of purchase. Defective products
should be returned to Ikelite postage paid. Ikelite will, at its sole discretion,
repair or replace such products, and will return to customer postage paid.
All other claims of any nature are not covered. Except as mentioned above,
no other warranty expressed or implied applies to this Ikelite product.
CUSTOMER SUPPORT
Ikelite Underwater Systems
Service Department
50 West 33rd St.
Indianapolis, IN 46208 USA
Email: [email protected]
Phone: [phone]
© 2016 Ikelite Underwater Systems
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
ikelite.com
4077.01-02-03_Base_Extension_/_Handles_1-0316