iLive ITBSW241B User manual

2
Safety Instructions & Warnings
Important Safety Instructions
• ReadtheseInstructions.
• KeeptheseInstructions.
• HeedallWarnings.
• Followallinstructions.
• Donotusethisapparatusnearwater.
• Cleanonlywithadrycloth.
• Donotblockanyventilationopenings.Installinaccordance
withthemanufacturer’sinstructions.
• Donotinstallnearanyheatsourcessuchasradiators,heat
registers,stoves,orotherapparatus(includingampliers)
thatproduceheat.
• Donotdefeatthesafetypurposeofthepolarizedor
grounding-typeplug.Apolarizedplughastwobladeswith
onewiderthantheother.Agroundingtypeplughastwo
bladesandathirdgroundingprong.ewidebladeorthe
thirdprongareprovidedforyoursafety.Whentheprovided
plugdoesnottintoyouroutlet,consultanelectricianfor
replacementoftheobsoleteoutlet.
• Protectthepowercordfrombeingwalkedonorpinched
particularlyatplugs,conveniencereceptacles,andthepoint
wheretheyexitfromtheapparatus.
• Onlyuseattachments/accessoriesspeciedbythe
manufacturer.
• Unplugthisapparatusduringlightningstormsorwhen
unusedforlongperiodsoftime.
• Referallservicingtoqualiedservicepersonnel.Servicing
isrequiredwhentheapparatushasbeendamagedinany
way,suchaspower-supplycordorplugisdamaged,liquid
hasbeenspilledorobjectshavefallenintotheapparatus,the
apparatushasbeenexposedtorainormoisture,doesnot
operatenormally,orhasbeendropped.
• Useonlywithacart,stand,tripod,bracket,
ortablespeciedbythemanufacturer,or
soldwiththeapparatus.Whenacartisused,
usecautionwhenmovingthecart/apparatus
combinationtoavoidinjuryfromtip-over.
WARNING: To reduce the risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing
to qualied service personnel.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude
to constitute a risk of electric shock to persons.
WARNING: DO NOT INGEST BATTERY,
CHEMICAL BURN HAZARD.
WARNING : This product can expose you
to chemicals including lead, which is known
to the State of California to cause cancer and
birth defects or other reproductive harm. For
more information go to www.P65Warnings.
ca.gov. This product meets and complies
with required Federal product guidelines.

3
FCC Warnings
Warning: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdierent
fromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechnician
forhelp.
FCC Radiation Exposure Statement
This equipment complied with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
• Mains plug is used as disconnect device and it should remain
readily operable during intended use. In order to disconnect
the apparatus from the mains completely, the mains plug
should be disconnected form the mains socket outlet
completely.
• WARNING: Shock hazard - Do Not Open.
• Caution and marking information is located at the rear or
bottom of the apparatus.
• WARNING: To reduce the risk of re or electric shock,
do not expose this apparatus to rain, moisture, dripping,
or splashing.
• Objects lled with liquids, such as vases, shall not be placed
on the apparatus.
• CAUTION: Use of controls or adjustments or performance
of procedures other than those specied may result in
hazardous radiation exposure.
• WARNING: Changes or modications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment
• WARNING: Do not place this unit directly onto furniture
surfaces with any type of soft, porous, or sensitive nish.
As with any rubber compound made with oils, the feet
could cause marks or staining where the feet reside. We
recommend using a protective barrier such as a cloth or a
piece of glass between the unit and the surface to reduce the
risk of damage and/or staining.
• WARNING: Use of this unit near uorescent lighting may
cause interference regarding use of the remote. If the unit is
displaying erratic behavior move away from any uorescent
lighting, as it may be the cause.
• CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
• Battery shall not be exposed to excessive heat such as
sunshine, re or the like.
• Keep new and used batteries away from children. If the
battery compartment does not close securely, stop using the
product and keep it away from children.
• If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate medical
attention.
• Do not mix old and new batteries.
• Completely replace all old batteries with new ones.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and
local guidelines.

4
Table of Contents
Setup
Features & Specications - 5
Power - 5
Remote Battery - 5
Includes - 5
Orientation
Rear View - 6
Front View - 6
Source Mode Indicator LED - 6
Speaker Controls - 6
Connecting the Satellite Speakers - 7
Connecting the Subwoofer - 7
Remote
Functions & Controls - 8
Connecting Devices
Initial Bluetooth Connection and Playing Audio - 9
Troubleshooting - 9
Aux In - 9
Company Information
Contact Information - 10
International Support - 10
Warranty - 10

5
Features & Specifications
• Supports Bluetooth 5.0, range: 60 ft.
• 4.1 channel stereo sound
• Digital volume control
• Full-function remote
• Aux In (3.5mm audio input)
Includes
• Remote control with CR2025 battery
• AC/DC power adapter
• 3.5mm to RCA cable
Power
Plug the power adapter for the soundbar into the DC
Input on the back of the soundbar and a standard
wall outlet.
Setup
Remote Battery
Requires 1 CR2025 battery (pre-installed).

6
Speaker Controls
Rear View
Front View
Speaker Inputs: Audio Outputs (to speakers) | Sub Audio Output | DC Power Input
Power/Source
Press to power the unit ON.
Press and hold to power the unit OFF.
Press to switch audio source to Bluetooth and Line In
modes.
Volume
Press to adjust volume.
Pair
Press to manually begin Bluetooth pairing (BLUETOOTH
MODE).
Aux In
3.5mm audio input.
Source Mode Indicator LED
Orientation
STATUS INDICATOR LIGHT
Power Off Red Light
Bluetooth Standby/Pairing Quick Flashing Blue Light
Bluetooth Connected Solid Blue Light
Aux In Mode Green Light
Function/Source Indicators: Power | Bluetooth | Aux In
PAIR AUX IN
SOURCE/
VOL +
VOL –

7
Connect each satellite speaker to the two satellite speaker inputs on the rear of the sound bar. Note: If there
is no sound from satellite speakers, please make sure the sub and satellite speakers are correctly connected.
Connecting the Satellite Speakers
Satellite Speakers
Sound bar
Connecting the Subwoofer
Connect the subwoofer to the output labled "Sub Out" on the rear of the sound bar as seen below.
NOTE: To reduce unwanted vibration, try place the
subwoofer on a solid or padded surface, such as the
floor or carpet.

8
Remote
Functions & Controls
MOVIEMUSIC
DIALOG
BASSTREBL
EV
OLUME
POWE
RM
UTE
AUX
SOURCE
Power
Press to turn
the unit on or off.
Press to switch
to Bluetooth Mode.
Aux
Press to switch
to Aux In mode.
Music
Press to switch to the
EQ optimized for music.
Press and hold Music for
5 seconds to turn voice
prompts ON/OFF.
Movie
Press to switch to the
EQ optimized for movies.
Dialog
Press to switch to the
EQ optimized for
dialogue.
Skip
In Bluetooth mode,
press to skip forward
or back one track.
Play/Pause
In Bluetooth Mode, press
to play or pause audio
tracks. Press and hold
to pair to a Bluetooth
device.
Treble
Press to adjust the treble
up or down.
Bass
Press to adjust the bass
up or down.
Volume +/-
Press to adjust
the volume.
Mute
Press to mute the volume.
The indicator on the sound
bar will flash. Press and
hold to reset treble and
bass to default level.

9
Initial Bluetooth Connection and Playing Audio
1. When first powered ON the unit defaults to Bluetooth mode. A voice will say, “Bluetooth,” and the LED indicator
will quickly flash blue. When pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select ITBSW241 in the Bluetooth Settings Menu to pair. If need
be, refer to the user’s manual for your specific device for more information.
3. When successfully paired, a voice will announce, “Bluetooth is connected,” and the LED indicator will turn solid
blue. Audio from the connected Bluetooth device will now be heard through the speaker.
4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust the volume level.
5. After initial pairing, anytime the speaker powers ON it will automatically connect to the last Bluetooth device
used. Note: If your device should become unpaired or you find it is unable to connect, press and hold the Play
button (on remote), or Pair button (sound bar) to enter to Pairing Mode. A voice will announce, “Bluetooth is
connecting,” and you can connect to the speaker manually.
Note: This sound bar has a last-function-used memory; it will resume using the last mode before it was turned OFF
after it is turned ON again.
Troubleshooting
If the sound bar should become unpaired or will not connect normally, follow these steps in your device’s
Bluetooth Settings Menu.
• Delete the sound bar (“Forget This Device”).
• Turn Bluetooth OFF, then ON again, and repeat the Initial Bluetooth Connection steps.
Connecting Devices
Aux In
Requires a 3.5mm audio cable (included).
1. Connect the 3.5mm to RCA cable to the 3.5mm Aux in on the sound bar and the other end into your TV or other
device.
2. Power ON the sound bar and press Source on the sound bar or Aux on the remote to select Aux In Mode. A
voice will announce the source mode and the indicator will turn green.
3. Use the controls on the connected device to select and play audio. Be sure the
volume on your connected device is audible when you begin playing.
PAIR AUX IN
SOURCE/
VOL +
VOL –

10
International Support
To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked
questions, visit the support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas
frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des
questions fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
Contact Information
Website: www.iLiveElectronics.com
Email Support: [email protected]
Email Parts: [email protected]
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the most up-to-date
version of this User’s Guide, go to:
www.iLiveElectronics.com
Copyright © 2021 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the
property of their respective owners. Specifications are subject to change without notice.
Protect for Today
Sustain for Tomorrow
Made
Green
Company Information