iLive ILO69TC User manual
INSTRUCTION MANUAL
FOR BUILT-IN OVENS
OPEN 24/7
ILVE ACCESSORIES ONLINE SHOP
ItalianoEnglishFrançaisDeutschEspañolPortuguês
1
INDEX
OVEN PRESENTATION 3
Installation and hook-up 3
Demo mode 3
setting the clock (first power-on) 4
switching on the oven 4
MAIN FUNCTIONS 5
active buttons from left to right 5
Cooking functions 5
simple gestures for cooking 6
CONTROL PANEL FUNCTIONS 7
SEQUENCE OF THE FUNCTIONS POSSIBILITY 7
ISTRUZIONI DI FUNZIONAMENTO 8
Conventional cooking 8
Fan cooking 8
Defrosting 8
Grill cooking 9
Temperature regulation 9
residual heat 9
oven light control 10
FUNCTIONS OF THE CLOCK 10
Minute-counter 10
Programmed cooking time 10
Delayed cooking 11
SAFETY: BLOCK TURNING ON THE OVEN 12
Key function 12
2
ItalianoEnglishFrançaisDeutschEspañolPortuguês
ItalianoEnglishFrançaisDeutschEspañolPortuguês
3
OVEN PRESENTATION
Dear Customer, your new oven is managed by an electronic card which constantly
monitors its operation in order to improve its all-round performance.
The state-of-the-art, reliable and precise touch control system.
The elegant, orderly and discreet interface, more user-friendly than ever before!
Just a few buttons, lots of functions and no difficult combination or sequence of
buttons. Simply concentrate on following the recipe and the oven is ready with two
movements!!!
Installation and hook-up
Dear Customer, this oven is a sophisticated electronic appliance, classified as a
durable good. Its installation requires licensed, qualified professionals for both the
hook-up of the power line and its placement in the kitchen counter.
Demo mode
This is the name of the mode usually implemented by the oven every time the electricity
supply fails and also when the oven is first connected.
The aim is to display all the control potentials with a recorded sequence of commands.
In this mode the oven is NEVER really activated, as the heating elements are
not switched on!!
The control panel is NOT ACTIVE so the oven does not respond to commands!
To exit from this mode, press the oven’s scroll functions button , for 5 seconds and
use the “+” and “-” buttons of the clock to set the exact time. The new time is
accepted 3 seconds after no “+” or “-” button is pressed and the digits stop flashing.
4
ItalianoEnglishFrançaisDeutschEspañolPortuguês
Setting the clock (first power-on)
With the oven off, press the oven time button ( ) for 3 seconds. This takes you to
Clock Setting mode.
The time will flash on the display (at the first power-on, it displays “12:00”). Use the “+”
and “-” buttons to set the time. The time set is automatically accepted if you press the
oven timer button or if no keys are pressed for 3 seconds: in the latter case, the digits
stop flashing.
Switching on the oven
The oven is switched on using the ON/OFF symbol shown in the
figure.
The control activates all the symbols, illuminating the background.
ItalianoEnglishFrançaisDeutschEspañolPortuguês
5
MAIN FUNCTIONS
Active buttons from left to right:
Power on and off with a simple touch (pressing it for 5 seconds activates the key
or “Child lock” function)
- Decrease the time
Clock
+ Increase the time
- Decrease temperature
is not a button but a silkscreen
+ Increase temperature
Scrolls through functions (each touch corresponds to a function of the oven)
Cooking functions
The control provides up to 14 different specific cooking functions depending on the
model you have!
Every function has a set temperature chosen on the basis of cooking tests using
frequently used recipes and can easily be adjusted to suit personal preference.
The following table contains the results of the cooking tests carried out in our
laboratories by a professional chef. However, this is merely a guide and the values
indicated are simply to help you get started and try our your own recipes, always
achieving the best results!
6
ItalianoEnglishFrançaisDeutschEspañolPortuguês
Simple gestures for cooking
Two simple movements are all it takes to set a cooking programme, thanks to the
state-of-the-art control logic: switch on the oven and select the best function for the
dish you are preparing.
The control proposes a temperature for every function. It is possible to change
it t any time, but if you are happy with it, you don’t need to do anything else.
The oven will be automatically activated in a few seconds!
ItalianoEnglishFrançaisDeutschEspañolPortuguês
7
CONTROL PANEL FUNCTIONS
1. Oven Light (this turns on whenever you power on the oven)
2. + (static) pre-set to 190 °C (can be set from 50 to 250 °C)
3. Upper heating element pre-set to 180 °C (can be set from 50 to 250 °C)
4. Lower heating element pre-set to 50 °C (can be set from 50 to 250 °C)
5. Small grill pre-set to 250 °C (can be et from 50 to 250 °C)
6. + ((Large grill ) pre-set from 250 °C (can be set from 50 to 250 °C)
7. + + (large ventilated grill) pre-set to 165 °C (can be set from 50 to 250 °C)
8. + + (static ventilated) pre-set to 165 °C (can be set from 50 to 250 °C)
9. Ventilated (circular + fan) pre-set to 165 °C (can be set from 50 to 250 °C)
10. + Pizza (ventilated + lower heating element) pre-set to 230 °C (can be set from 50 to 250 °C)
11. Radial ventilation pre-set to ----- °C (defrost if used alone can be set from 40 to 60 °C)
12. + + (lower heating element + large grill) pre-set to 190 °C (can be set from 50 to 250 °C)
13. + (lower heating element + fan) pre-set to 165 °C (can be set from 50 to 250°C)
14. + (small ventilated grill) pre-set to 165 °C (can be set from 50 to 250 °C)
SEQUENCE OF THE FUNCTIONS POSSIBILITY
8
ItalianoEnglishFrançaisDeutschEspañolPortuguês
INSTRUCTIONS FOR USE
Conventional cooking
A classic system that uses upper and lower heat suitable for cooking a single dish.
It is a good idea to insert the food when the oven has reached the pre-set
temperature, i.e., when the °C symbol stops flashing. If you need to increase the
temperature towards the end of cooking, use the + temperature regulation button.
We recommend opening the door as little as possible during cooking.
Fan cooking
For this type of cooking a fan positioned at the back allows the circulation of hot
air inside the oven, creating uniform heat. In this way cooking is more rapid than
conventional cooking. It is a suitable method for cooking dishes on more than one
shelf, especially when the food is of different types (fish, meat etc.).
Defrosting
When you select the “radial fan” function, the fan will circulate room-temperature
air inside the oven to quickly defrost frozen food.
The temperature display will show “d--o”. It is possible to regulate the temperature of
the oven from 40 °C to 60 °C, in increments of 5 °C.
ItalianoEnglishFrançaisDeutschEspañolPortuguês
9
Grill cooking
Use the grill to grill or brown foods. Some ovens may be equipped with an electric
motor, spit and skewers for turning on the spit.
Place the shelf with the food to be cooked in the 1st or 2nd position from the top.
Pre-heat the oven for 5 minutes.
Temperature Regulation
The control makes use of a temperature probe with a level of precision of ±5°C offering
maximum reliability of the cooking times required.
To change the temperature simply use the plus and minus symbols. The range of
regulation varies from +50°C to +250°C.
It isn’t necessary to confirm the change, as the control is automatically activated after
just a few seconds.
During heating, the centigrade degree (°) symbol flashes to indicate that the oven is
heating.
When the pre-set temperature is reached, the buzzer sounds and the symbol (°)
remains steady on.
Residual heat
While cooking food, the structure of the oven stores heat. This heat is kept isolated
from the rest of the kitchen thanks to an excellent insulation system and certain
construction details.
The heat is gradually dispersed can be used as a further cooking resource if managed
appropriately: the control indicates the interior temperature, after the oven has been
switched off, until it reaches 50°C.
10
ItalianoEnglishFrançaisDeutschEspañolPortuguês
use this feature to keep food warm or to gently complete the cooking process.
Oven light control
In order to achieve the best results in terms of performance and energy consumption,
this function is automatically managed by the oven during its functioning. If you want
to turn it on at any time, just touch any active button on the control panel.
FUNCTIONING OF THE CLOCK
Minute-counter :
Start - When the button is pressed the symbol turns on (flashing) and “00.00”
appears on the display with the dot flashing.
Set - The time can be set (max 23h59’) using the “+” and “-” buttons.
Confirm - The time set is automatically accepted if you press the oven timer button or
if no keys are pressed for 3 seconds: in this case, the symbol and the dot stop
flashing.
Minute-counter - The relative symbol is lit as long as this function is active. This func-
tion is independent of the functioning of the oven (it can even be used if end-of-cook-
ing programming is running).
End time set - When the count-down is finished, the buzzer sounds and the relative
symbol flashes. If you press one of the buttons, it turns off, or automatically turns off
after 3 minutes.
Programmed cooking time:
Start – Enter the oven function and confirm.
Press two times, lights up and the letters Dur intermittently appear on the
display.
Set – The time can be regulated using the “+” and “-” buttons.
Confirm – The time set is automatically accepted after no buttons are pressed for 3
seconds: in this case, the digits and the dot stop flashing. The relative symbol
remains lit. The display alternatively shows the time and the temperature with the
centigrade degree symbol flashing.
ItalianoEnglishFrançaisDeutschEspañolPortuguês
11
Cooking duration – The relative symbol remains lit as long as the function is active.
Once the cooking duration function is activated, it remains on as long as the cooking
selected remains the one on which the cooking duration was set.
End cooking - When cooking is finished, the programmed cooking symbol flashes
until another active button is touched; the buzzer sounds for 3 minutes.
Delayed cooking:
Start – Enter the oven function and confirm.
Press two times, lights up and the letters Dur intermittently appear on the
display.
Set cooking duration – The cooking duration time can be regulated using the two “+”
and “-” buttons.
Press again. The symbol continues to flash and the letters End (end cooking
time) appear on the display.
Set end cooking time – The end cooking time can be regulated using the two “+” and
“-” buttons.
Confirm – The time set is automatically accepted if you press the oven TIMER button
or if no keys are pressed for 3 seconds: in this case, the digits and the dot stop
flashing. The relative symbol remains lit. The display alternatively shows the time.
Start cooking – The oven turns on at the desired time (end cooking time minus cooking
duration); as long as the function is active the relative symbol remains lit. The
display alternatively shows the time and the temperature with the centigrade degree
symbol flashing.
End cooking - When cooking is finished, the programmed cooking symbol flashes
until another active button is touched; the buzzer sounds for 3 minutes.
SAFETY: BLOCK TURNING ON THE OVEN
Key function
The key (or child lock) function is activated/deactivated by holding down the key
for at least 5 seconds: The command responds by displaying the key symbol (
) alternating with the clock.
When the key function is active, all oven operations are inhibited and indicated by the
triple-flashing of the symbol .
Warranty Card
Eurolinx Pty Limited A.B.N. 50 001 473 347
trading as ILVE (“ILVE”)
WARRANTY REGISTRATION
PRIVACY
WARRANTY
3 ILVE Operating Manual
or
ALL SERVICE CALLS MUST BE BOOKED
THROUGH THE ILVE SERVICE AND
Warranty Card
4ILVE Operating Manual
2
3
Warranty Card tear off
Table of contents
Other iLive Oven manuals
Popular Oven manuals by other brands
Respekta
Respekta DIGI SET 8 GLAS PP User manual and installation instructions
Electrolux
Electrolux EOB3400BOX user manual
Russell Hobbs
Russell Hobbs RHTOV18A Instructions & warranty
Bosch
Bosch CMG7241 1 Series user manual
GE
GE JKP35SM Dimensions and installation information
Maytag
Maytag S1500PAW owner's guide