iLive ISB150 User manual

15” Portable Wireless Speaker Sound Bar
User’s Guide for Model ISB150 v2487-01
Controls
Battery Charging
To charge the internal battery, plug the USB charging cable
into the DC Power Input on the speaker and a powered on
computer or USB power adapter (not included) and standard
power outlet. Charging time is approximately 3-4 hours. Battery
life is approximately 10 hours at 50% volume.
When the battery is low a voice will announce“Low Battery,”
then the unit will automatically power OFF.
While the unit is charging it will display a solid red light. When
the battery is fully charged the light will turn o.
Features
• 15” length
• Bluetooth wireless 5.0: range 33 ft.
• Party Plus Mode
• Full range speakers
• Built-in microphone
• Voice prompts
• Digital volume control
• Built-in rechargeable battery: approximately 10 hrs
playtime at 50% volume
• Micro-USB port for battery recharge
Includes
• 3.5mm audio cable
• Micro-USB to USB charging cable
Aux In
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Aux In on the unit
and the audio output on an audio device.
2. Press Source to switch to Aux Mode.
3. Use the controls on the connected device to select and
play audio. Be sure the volume on your connected device
is audible when you begin playing.
Note: Newer phone models may require an adapter (lighting-
to-3.5mm headphone adapter for iPhone,) or (USB-C to 3.5mm
audio adapter,) for android.
1. Power: Press and hold to power ON or OFF.
2. DC Power Input: Use to charge the internal battery
and power the speaker.
3. Indicator LED: Light will turn solid red when charging.
Will turn solid blue when in Bluetooth mode. Light will
slowly ash when in Aux in mode.
4. Volume/Skip: Press to adjust the volume level. Press
and hold to skip audio tracks.
5. /Pair: Press to play or pause tracks. Press and hold
to enter to Pairing Mode.
6. Aux In (3.5mm Audio Input)
7. Microphone
8. Source/Party+: Press to change source modes to
Bluetooth or Aux. Press and hold to enter Party Plus
Mode.
1
3
5
2
4
6
8
7

Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [email protected]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2020 Digital Products
International (DPI, Inc.) All other trademarks
appearing herein are the property of their
respective owners. Specications are subject
to change without notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this
unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is used
as the disconnect device, such disconnect device shall remain
readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable
and should be recycled or disposed of according to state and local
guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might
explode. Contact your local government for disposal or recycling
practices in your area.
Speakerphone
1. To accept a call, press the button, or use the controls
on the connected phone.
2. To end a call, press the button, or use the controls
on the connected phone.
Party Plus Mode
If you have another ISB150 speaker, you can pair and play the
two speakers together for a surround sound eect, or have two
speakers playing in dierent rooms.
1. To enter Party Plus Mode, Power ON both speakers and
set to Bluetooth mode.
2. Press and hold the Source/Party+ button on one of the
units and the speakers will attempt to pair to each other.
3. When the 2 speakers are paired together a voice will
announce the connection.
4. Connect Bluetooth device to speakers using the steps
from the “Pairing and Playing Bluetooth Audio”section
above.
5. Use your device to select and play tracks. The audio will
now be heard through both speakers.
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California
to cause cancer and birth defects or other reproductive
harm. For more information go to www.P65Warnings.
ca.gov. This product meets and complies with all Federal
regulations.
Previously Connected Devices
• To manually pair to another device, press and hold the
button. The speaker will enter pairing mode and can
connect to a new device.
• The speaker can remember multiple Bluetooth devices
and will always try to re-connect to the last device used.
• To re-connect to a dierent device, turn o Bluetooth on
unwanted devices, then access the Bluetooth settings
menu on the device you wish to use and select ISB150.
Troubleshooting
If the speaker should become unpaired or will not connect
normally, follow these steps in your device’s Bluetooth Settings
Menu.
1. Delete the speaker (“Forget This Device”).
2. Turn Bluetooth OFF then ON again, and repeat the
Pairing & Playing Bluetooth Audio steps.
Made
Green
Pairing & Playing Bluetooth Audio
1. When rst powered on, the speaker defaults to Bluetooth
Mode and is ready to pair automatically. When pairing,
remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select
ISB150 in the Bluetooth settings to pair. If need be,
refer to the user’s manual for your specic device for more
information.
3. When successfully paired, a voice will announce,
“Bluetooth is connected.”Your Bluetooth device will now
be heard through the speaker.
4. Use the controls on the connected Bluetooth device to
select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust
the volume level.
5. After initial pairing, the speaker will automatically
connect to the last Bluetooth device used whenever it is
in Bluetooth Mode. Note: If your device should become
unpaired or you nd it is unable to connect, press and
hold the button to enter to Pairing Mode. A voice
will announce,“Bluetooth is connecting,” and you can
connect to the speaker manually.