iLive ITB474 User manual

iLive | ITB474
Quickstart Guide
For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215
Power & Input Modes
Using the ITB474 Sound Bar
Bluetooth
Connecting your sound bar wirelessly using Bluetooth
Plug the small end of the power cord into the DC Input on the back
of the speaker, and the large plug into a standard wall outlet.
Indicator Lights
Power
STATUS INDICATOR
Power O No Light
Line In Mode Green Light
Optical Mode Amber Light
Aux In Mode White Light
Bluetooth Pairing Flashing Blue Light
Bluetooth Connected Blue Light
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the button on the remote to switch to Bluetooth Mode, indicated by a slowly ashing
blue light.
3. Press the Pair button on the unit.
The pairing indicator will ash blue quickly. When pairing, remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the ITB474 in your Bluetooth
settings to pair. If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing and connecting
Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the Pairing
Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device. If your device should become unpaired or you nd it is unable to connect, repeat
the above steps.
Playing Audio Wirelessly
1. After pairing to a bluetooth device, use the native controls on the connected Bluetooth Device to
select a track.
2. Play, pause or skip a selected track using the native controls on the connected Bluetooth Device or
the controls on the speaker's remote.
3. Audio played through the connected Bluetooth device will now be heard through the speakers.

iLive | ITB474
Quickstart Guide
For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215
Satellite Speaker Indicator Lights
STATUS INDICATOR
Paired to Main Speaker Solid Green Light
Pairing to Main Speaker Quickly Flashing Green Light
Battery Low Flashing Red Light
Battery Charging Solid Red Light
Battery Charged No Light
The Satellite Speakers
Using the ITB474 Sound Bar Satellite Speakers
The Satellite Speakers
This unit is equipped with two detachable speakers that may be used to create a
surround sound eect and lend an extra dimension to your listening experience. From
the remote control, the speakers can be powered on or o, and change their volume
independently of the main speaker. The satellite speakers can wirelessly play music or
sound anywhere in a 33 ft area near the main unit.
Re-Connecting the Satellite Speakers
If your satellite speakers lose their wireless connection to the main speaker unit for
any reason, press and hold the Connect button on the satellite speaker for one second
and release, then perform the same operation on the main speaker unit (see diagram
on the next page). The green indicator light on the front of the satellite speaker will
blink quickly, then become solid as the connection is re-established.
Charging the Satellite Speakers
The satellite speakers are powered by internal lithium batteries and must be recharged
after extended periods of use. To charge the satellite speakers, simply dock them with
the main speaker unit. A red light on the front of the speakers will indicate the speaker
is charging. The initial charge time for the speakers is 6 hours.
Powering On the Satellite Speakers
The satellite speakers must rst be powered on manually by turning the Power Switch
on the speakers to On (see diagram on next page). They should already be wirelessly
connected to the main speaker and will be ready to play sound whenever you choose.