iLive ILED75W User manual

FCC WARNINGS
Warning: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

WARNINGS AND PRECAUTIONS
• To prevent re or shock hazards, do not expose this unit
to rain or moisture.
• Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain
readily operable.
• The remote control’s button cell battery contains
mercury. Do not put in the trash, instead recycle or
dispose of as hazardous waste.
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Battery shall not be exposed to excessive heat such as
sunshine, re or the like.
• Batteries should be recycled or disposed of as per state
and local guidelines.
• Keep new and used batteries away from children. If the
battery compartment does not close securely, stop using
the product and keep it away from children.
• If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
• WARNING: This product may contain chemicals known
to the State of California to cause birth defects, or other
reproductive harm (California Prop 65). Wash hands after
handling.
• This product meets and complies with all Federal
regulations.

To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at: www.iLiveElectronics.com.
Para descargar este Manual del Usuario en
Inglés, Español y Francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en:
www.iLiveElectronics.com.
Pour télécharger ce guide de l’utilisateur en
Anglais, Espagnol ou Français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com.
International Support

Website: www.iLiveElectronics.com
Email Support: [e-mail]
Email Parts: [e-mail]
Phone Support: 1-888-999-4215
Contact Information
For Warranty Information and the most
up-to-date version of this User’s Guide, go to:
www.iLiveElectronics.com.
Warranty
Specications are subject to change without notice.
Copyright © 2015 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property
of their respective owners.

Wireless Speaker + LED Lightbulb
User’s Guide for Model No. ILED75-1262-01

Features
• Supports Bluetooth
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Wireless range: 60 feet
• LED light bulb with eects
• Color-changing lights with auto and
manual color-changing modes
• Built-in speaker
• Brightness: 165 lumens
• Color temperature: 5300K
• Standard light socket size E26
• AC input: 110V - 240V
• Remote control: requires a CR2025 battery
(pre-installed)
Includes

Unit Overview
LED Light
Internal
Speaker
Plug

Remote
Green
White
Play/Pause
Cycle Lights
Note: Remote IR signal range is 20-23 ft. (6-7 m).
Purple
Pair
OFF
Orange Dark Blue
Light BlueYellow

Remote Batteries
Remote control requires one CR2025 coin/button
cell battery (included).

Pairing a Bluetooth Device
When pairing, remain within 3 feet of the unit.
1. Press the Pair button on the remote.
The light will begin ashing blue.
2. Using the controls on your Bluetooth
device, scan for and select ILED75 in your
Bluetooth settings to pair. If your device
requests a password, enter the default
password 0 0 0 0 . Refer to the user’s manual
for your specic device for instructions on
pairing and connecting Bluetooth devices.
3. When successfully paired, the light will
switch to solid blue, then resume the last
light mode.
4. Use the Play/Pause button on the remote
or your Bluetooth device to play or pause
an audio track.
If your device should become unpaired or
you nd it is unable to connect, repeat the
above steps.