iLive ISB210 User manual

Aux In
Requires a 3.5mm cable (included).
1. Connect the included 3.5mm cable to the Aux in
port on the speaker. You will hear “Auxiliary” and
the Indicator Light will ash slowly when the unit
is ready.
2. Plug the other end into audio output/headphone
jack on a media player.
3. Use the controls on the connected device to select
and play audio.

LED Lantern
1. To use the lantern light, use 2 ngers to gently tap
the lantern sensor or tap the top of the lantern.
2. Tap once for high setting, twice for medium, three
times for low and four times to turn the light o.

ADDITIONAL WARNINGS
• WARNING: To prevent re or shock hazards, do not expose
this unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
• Lithium batteries, like all rechargeable batteries, are
recyclable and should be recycled or disposed of according to
state and local guidelines. They should never be disposed of in
normal household waste and they should never be incinerated,
as they might explode. Contact your local government for
disposal or recycling practices in your area.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California
to cause cancer and birth defects or other reproductive
harm. For more information go to: www.P65Warnings.
ca.gov. This product meets and complies with all
Federal regulations.

International Support
To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently asked
questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en Inglés,
Español y Francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en Anglais,
Espagnol ou Français, ou pour obtenir des réponses
à des questions fréquemment posées, consultez la
rubrique d’assistance sur:
www.iLiveElectronics.com

Contact Information
Website: www.iLiveElectronics.com
Email Support: [email protected]
Email Parts: par[email protected]
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the most
up-to-date version of this User’s Guide, go to:
www.iLiveElectronics.com.
Protect for Today
Sustain for Tomorrow
Made
Green
Specications are subject to change without notice.
Copyright © 2020 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property
of their respective owners.

Portable Touch Light
Wireless Speaker
User’s Guide for Model ISB210 v2463-01

Features
• Supports Bluetooth
• Party Plus Mode
• Wireless range: 33 ft.
• Built-in microphone for hands free speakerphone
• Voice prompts announce speaker functions
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable battery
• Battery life: approx. 9 hrs at 50% volume (light o)
Includes
• USB charging cable
• 3.5mm audio cable
• User’s guide

Overview & Controls
Volume
Play/Pause/
Pair
Power
Microphone Bluetooth/Charging
Indicator Light
Lantern Sensor

Remove the sticker on the bottom of the speaker.

Battery Power
Charge fully before use. The charge time is
approximately 3 hours.
When the unit is charging, the Charging Indicator
Light will display a solid red light. When charging is
complete, the indicator will turn green.
Using a Micro- USB to USB cable (included), connect
the DC power input on the speaker to the USB port of
a powered on computer or USB power adaptor (not
included) to charge the speaker.

Pairing Bluetooth & Playing Audio
Note: This model features automatic Bluetooth pairing.
1. Power on the speaker, the Bluetooth Indicator
Light will ash white, this means the speaker is
ready to pair.
2. Using the controls on your Bluetooth device,
select ISB210 in the Bluetooth settings to pair. A
voice will announce“Bluetooth is connected,”and
the light will turn solid white when the speaker is
successfully paired to your device. If need be, refer
to the user’s manual for your specic device for more
information.
3. Use the controls on the connected Bluetooth
device to select and begin playing audio. Use
the controls on the device or the speaker to play,
pause, or answer an incoming call.
Note: The speaker will always try to reconnect to
the last device used. To reconnect to a dierent
device, press and hold the Play/Pause/Pair button
until “Bluetooth is connecting,” is heard. Access the
Bluetooth settings menu on the device you wish to
use and select ISB210.

Party Plus
If you have two ISB210 Wireless Speakers, you can pair
them together for stereo sound.
1. Power on both speakers one by one.
2. Make sure that both speakers are not connected
to any Bluetooth device.
3. Press the POWER button once on one of the
speakers and wait until you hear a beep indicating
the 2 speakers are paired. Note: this is now the
dominant speaker.
4. Pair your device to ISB210 and audio can now be
heard on both speakers.
5. To disconnect from Party Plus Mode, Press the
POWER button on one of the speakers.
6. To reconnect again, quickly press the POWER
button twice on the non-dominant speaker.