iLive ISB46 User manual

To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently asked
questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en Inglés,
Español y Francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en Anglais,
Espagnol ou Français, ou pour obtenir des réponses
à des questions fréquemment posées, consultez la
rubrique d’assistance sur:
www.iLiveElectronics.com
International Support
Website: www.iLiveElectronics.com
Email Support: [email protected]
Email Parts: [email protected]
Phone Support: 1-888-999-4215
Contact Information
For Warranty Information and the most
up-to-date version of this User’s Guide, go to:
www.iLiveElectronics.com.
Warranty
M
Copyright © 2016 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property
of their respective owners.
Bluetooth speacker
User’s Guide for Model ISB46
FCC WARNINGS
•
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not instal and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:(1)This device may
not cause harmful interference,and(2)this device must accept any
interference received,including interference that may cause undesired
operation .
ADDITIONAL WARNINGS
•
this unit to rain or moisture.
•WARNING : Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
•Lithium batteries, like all rechargeable batteries, are
recyclable and should be recycled or disposed of according
to state and local guidelines. They should never be disposed
of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local
government for disposal or recycling practices in your area.
•WARNING: This product may contain chemicals known
to the State of California to cause birth defects, or other
reproductive harm (California Prop 65). Wash hands after
handling.
•This product meets and complies with all Federal regulations.

OverviewFeatures / Includes
• Bluetooth wireless
• Wireless range: 60 ft
• Aux In
•
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable
lithium ion battery
• Battery life - approx. 3 hrs
• Micro-USB charging cable
Charging the Speaker
Lights / Power
Slide switch to ON to power
the speaker.
Slide Switch to Lights ON to
power the lights and speaker.
Battery &
Wireless Status
Pair Bluetooth
Micro-USB
Power Port
Aux In
Requires a Micro-USB to USB cable (included).
1. Using a Micro-USB to USB cable (included),
connect the larger USB plug to the USB port of a
powered on computer or USB power adaptor.
2. Connect the smaller Micro-USB plug into the
Micro-USB port of the speaker. The unit will now
charge. Be sure the computer is not in sleep mode.
if the battery is
low. When the unit is charging, the Battery indicator
will display solid red. When the unit is fully charged,
the
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In Input
on the unit and the audio output/headphone
jack on a media player.
2. The unit will automatically detect the input and
switch to Aux In Mode, indicated by a solid
green light on the front of the unit.
3. Use the controls on the connected device to
select and play audio.
Aux In (3.5mm Audio Input)
1. Power on the unit by sliding the Power Switch
to the ON position, and press and hold the Pair
button. The Pairing Indicator will begin quickly
When pairing, remain within 3 feet
of the unit.)
2. Using the controls on your Bluetooth device,
select the ISB46 in your Bluetooth settings to
pair. (If your device requests a password, enter the
default password 0 0 0 0 .)
3. When successfully paired, the Pairing Indicator
will turn solid blue and an audible chime will
sound from the speaker.
After initial pairing, the unit will stay paired
unless unpaired manually by the user, or erased
due to a reset of the device. If your device should
connect normally, repeat the steps above.
Pairing a Bluetooth Device
Playing Audio Wirelessly
1. Once connected, use the controls on your device
to select and play audio.